Javilonas
Trovador Loco
Developer
- Registrado
- 10 Sep 2006
- Mensajes
- 25.306
- Reacciones
- 2.689
- Puntos
- 322
Geminis 4.70 Mod-lonas sbox + mbox 03/08/2010
Imagenes cedidas por el compi: vilgar
http://img834.**********.us/i/imaxenescomscreenshot1h.jpg/http://img834.**********.us/i/imaxenescomscreenshot1h.jpghttp://img834.**********.us/i/imaxenescomscreenshot1h.jpg/
La imagen no trae bomba y está modificada por mi,
es la geminis original descargada de la web oficial de ellos, se a cogido el archivo head.ko y modificado de tal forma que el time bomb (la famosa bomba) ya no esté entre nosotros y podamos hacerla rular sin problemas en cualquier clon o similar a la original.
UNA VEZ CARGADA la imagen seguir estos pasos....
1. Encender el deco y configurar el idioma,satelite por defecto y la ip de la dream.
2. Acceder por telnet y aplicar el comando passwd para cambiar vuestra password por seguridad.
3. Abrete el Programa dreamset y cargate una lista de las mias jejeje.
4. Mientras estas cargando la lista de canales o justo despues puedes acceder al ftp de el deco y empezar a meter tus peer en el cwshare.
5. Entra en /var/bin/ y configura el sbox.conf con el serial en hex de tu card,si no sabes sacarlo pregunta.
6. Pulsa con el mando boton azul seguido de el boton numero 5 y activa el crond, si esta en verde, sales de hay.
7. Con el mando de el deco selecciona antes de nada un canal por ejemplo el c+.
8. Por fin lo tenemos configurado todo..... ahora Reinicia el deco y cuando inicie de nuevo se vera todo del tiron y muy fluido
9. No estaría mal una pequeña donación al foro jejejeje o unas cañas freskitas que hace mucho calor y así animas a seguir adelante con todo ello xD
SI QUIERES SEGUIR VIENDO LAS PELIS DESCARGADAS AL PC EN LA DREAM CON ESTA IMAGEN SIGUE ESTE MANUAL:
http://www.lonasdigital.com/manuale...er-pelis-del-pc-en-la-dream-29075/#post176643
Si haces capturas las podemos poner en el primer post jejeje
LA IMAGEN ESTA PREPARADA Y CONFIGURADA PARA UNA CARD GRIS CENIZA A FALTA DE AÑADIR VUESTRO SERIAL EN HEX PERO SI POR LO QUE SEA VUESTRAS CARD SON OTRAS POR EJEMPLO VIACCES PODEIS VER AQUÍ LAS CONFIG DE CADA UNA:
sbox.conf
port.list
users.sbox
Recordar que al final de la linea C en el cwshare teneis que modificar el provider de la ceniza por el de vuestra card
No estaría mal si te sirvio esta imagen o otras mod lonas que nos ayudaras con una mini donación para poder seguir manteniendo este sitio y aportando cosas como estas...
Donaciones:
Lista de colaboradores: Lista de Donantes .:: Agradecimientos ::.
Si te gusta mi trabajo y quieres colaborar o invitarme a un café
Imagenes cedidas por el compi: vilgar
http://img834.**********.us/i/imaxenescomscreenshot1h.jpg/http://img834.**********.us/i/imaxenescomscreenshot1h.jpghttp://img834.**********.us/i/imaxenescomscreenshot1h.jpg/
Novedades que incorporará la imagen:Instalar con Dreamup o FLASWIZARD
SIIIIII CARGA CON LOS DOS JEJEJE
Fueron 3 días a piñon acostandome a las tantas para poder dejarla tal y como está en estos momentos, por lo tanto espero que sea de vuestro agrado compañeros.SOLUCIONADO ERROR PANTALLA NEGRA Y LED VERDE y ya podeis cargarla por FLASWIZARD SIN MIEDO ALGUNO
- Nuevo bootlogo
- 31% ocupado en /var solo, por lo tanto tienes espacio en /var/ para rato xD
- Mas memoria liberada
- Actualizado el web interface así como algunos BIN y librerias de cvs
- Modificación de el head.ko , eliminando todo rastro viviente de el timebomb por mi mismo
- Creado Emuladora.sh por lonas para solucionar el problema de arrancar mbox y sbox
- para reiniciar mbox o sbox solo reiniciar la dream o bien por telnet mediante comandos ya que al cambiar la emuladora que gestionaba la emu no hace esta funcion, igual en una proxima se añade un boton de parada y reinicio de emu.
- agregadas dos tareas por cron, una para reiniciar de madrugada y otra para dejarlo 15 minutos despues el deco en standby.
- establecidos el startscripts junto con la emuladora al arranque en el inicio
- Suprimidos archivos presindibles como en todas las mod lonas.
- nuevo skin DS-3Dx1 con lectura de peer y distancias en pantalla
- eliminación de skin por defecto blue line ahorrando espacio en /var
- mbox 022.3.r + sbox lectura y actualización de card en dm500 gracias al sbox
- plugin borraoffs de el maestro "chuflu" , almoadillando a los peers a los 10 dias de off prolongado
- script borrafakes de el maestro "chuflu" . eliminando tambien en caliente peer con versiones fakes como la 2.70 y 2.1c
- script peer_resolver de el maestro "chuflu", nos permitirá conectar con los peer antes aliviando los hellos
- mbox y sbox en /bin/
- optimizacion de mbox.cfg
- Preparada para leer y actualizar la card ceniza directamente sin modificar nada mas que vuestro serial en el sbox.conf
La imagen no trae bomba y está modificada por mi,
es la geminis original descargada de la web oficial de ellos, se a cogido el archivo head.ko y modificado de tal forma que el time bomb (la famosa bomba) ya no esté entre nosotros y podamos hacerla rular sin problemas en cualquier clon o similar a la original.
UNA VEZ CARGADA la imagen seguir estos pasos....
1. Encender el deco y configurar el idioma,satelite por defecto y la ip de la dream.
2. Acceder por telnet y aplicar el comando passwd para cambiar vuestra password por seguridad.
3. Abrete el Programa dreamset y cargate una lista de las mias jejeje.
4. Mientras estas cargando la lista de canales o justo despues puedes acceder al ftp de el deco y empezar a meter tus peer en el cwshare.
5. Entra en /var/bin/ y configura el sbox.conf con el serial en hex de tu card,si no sabes sacarlo pregunta.
6. Pulsa con el mando boton azul seguido de el boton numero 5 y activa el crond, si esta en verde, sales de hay.
7. Con el mando de el deco selecciona antes de nada un canal por ejemplo el c+.
8. Por fin lo tenemos configurado todo..... ahora Reinicia el deco y cuando inicie de nuevo se vera todo del tiron y muy fluido
9. No estaría mal una pequeña donación al foro jejejeje o unas cañas freskitas que hace mucho calor y así animas a seguir adelante con todo ello xD
SI QUIERES SEGUIR VIENDO LAS PELIS DESCARGADAS AL PC EN LA DREAM CON ESTA IMAGEN SIGUE ESTE MANUAL:
http://www.lonasdigital.com/manuale...er-pelis-del-pc-en-la-dream-29075/#post176643
Si haces capturas las podemos poner en el primer post jejeje
LA IMAGEN ESTA PREPARADA Y CONFIGURADA PARA UNA CARD GRIS CENIZA A FALTA DE AÑADIR VUESTRO SERIAL EN HEX PERO SI POR LO QUE SEA VUESTRAS CARD SON OTRAS POR EJEMPLO VIACCES PODEIS VER AQUÍ LAS CONFIG DE CADA UNA:
sbox.conf
Código:
[COLOR=#000000][COLOR=#007700][[/COLOR][COLOR=#0000bb]main[/COLOR][COLOR=#007700]]
[/COLOR][COLOR=#0000bb]server_only[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# 0=emu+newcamd server 1=only newcamd server
[/COLOR][COLOR=#0000bb]log[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
[/COLOR][COLOR=#0000bb]userspath[/COLOR][COLOR=#007700]=/var/[/COLOR][COLOR=#0000bb]bin[/COLOR][COLOR=#007700]/[/COLOR][COLOR=#0000bb]users[/COLOR][COLOR=#007700].[/COLOR][COLOR=#0000bb]sbox [/COLOR][COLOR=#ff8000]# users list
[/COLOR][COLOR=#0000bb]webinterface[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# 1=web interface on 0=web interface off
[/COLOR][COLOR=#0000bb]webport[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]8181 [/COLOR][COLOR=#ff8000]# web interface port
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]slot0[/COLOR][COLOR=#007700]]
[/COLOR][COLOR=#0000bb]active[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]1 [/COLOR][COLOR=#ff8000]# 0=inactive 1=active
[/COLOR][COLOR=#0000bb]sci[/COLOR][COLOR=#007700]=/[/COLOR][COLOR=#0000bb]dev[/COLOR][COLOR=#007700]/[/COLOR][COLOR=#0000bb]sci0 [/COLOR][COLOR=#ff8000]# lower
[/COLOR][COLOR=#0000bb]ncdserver[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# 0=newcamd server off 1=newcamd server on
[/COLOR][COLOR=#0000bb]deskey[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0102030405060708091011121314 [/COLOR][COLOR=#ff8000]# newcamd deskey
[/COLOR][COLOR=#0000bb]port[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]15050 [/COLOR][COLOR=#ff8000]# newcamd port
[/COLOR][COLOR=#0000bb]mhz[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!
#Nagra2/3 Example
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]CCCCCCCC[/COLOR][COLOR=#007700]] [/COLOR][COLOR=#ff8000]# nagra2 hexserial (4 bytes)
[/COLOR][COLOR=#0000bb]rsa[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# rsa "n" from this card (like newcs)
[/COLOR][COLOR=#0000bb]boxkey[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# boxkey from this card
[/COLOR][COLOR=#0000bb]emm[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# 0=accept all 1=block emms 2=block emmu 4=block emmg
[/COLOR][COLOR=#0000bb]portlist[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# use portlist or no
[/COLOR][COLOR=#0000bb]portlistpath[/COLOR][COLOR=#007700]=/var[/COLOR][COLOR=#ff8000]/****/[/COLOR][COLOR=#0000bb]port[/COLOR][COLOR=#007700].list [/COLOR][COLOR=#ff8000]# path from port.list
#Nagra tiger/ncmed Example
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]CCCCCCCC[/COLOR][COLOR=#007700]] [/COLOR][COLOR=#ff8000]# nagra hexserial (4 bytes)
[/COLOR][COLOR=#0000bb]emm[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]2 [/COLOR][COLOR=#ff8000]# 0=accept all 1=block emms 2=block emmu 4=block emmg
[/COLOR][COLOR=#0000bb]portlist[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# use portlist or no
[/COLOR][COLOR=#0000bb]portlistpath[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# path from port.list
#Seca Example
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]CCCCCCCC[/COLOR][COLOR=#007700]] [/COLOR][COLOR=#ff8000]# seca hexserial (4 bytes)
[/COLOR][COLOR=#0000bb]ok_view[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
[/COLOR][COLOR=#0000bb]emm[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]7 [/COLOR][COLOR=#ff8000]# 0=accept all 1=block emms 2=block emmu 4=block emmg
[/COLOR][COLOR=#0000bb]portlist[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# use portlist or no
[/COLOR][COLOR=#0000bb]portlistpath[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# path from port.list
#Viaccess Example
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]CCCCCCCC[/COLOR][COLOR=#007700]] [/COLOR][COLOR=#ff8000]# via hexserial (4 bytes)
[/COLOR][COLOR=#0000bb]emm[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]7 [/COLOR][COLOR=#ff8000]# 0=accept all 1=block emms 2=block emmu 4=block emmg
[/COLOR][COLOR=#0000bb]portlist[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# use portlist or no
[/COLOR][COLOR=#0000bb]portlistpath[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# path from port.list
[/COLOR][COLOR=#0000bb]aeskey[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# aeskey used by nano d2
#Irdeto Example
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]CCCCCCCC[/COLOR][COLOR=#007700]] [/COLOR][COLOR=#ff8000]# irdeto hexserial (4 bytes)
[/COLOR][COLOR=#0000bb]camkey[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0000000000000000 [/COLOR][COLOR=#ff8000]# CamKEY
[/COLOR][COLOR=#0000bb]camkeydata[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
emm[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]7 [/COLOR][COLOR=#ff8000]# 0=accept all 1=block emms 2=block emmu 4=block emmg
[/COLOR][COLOR=#0000bb]portlist[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# use portlist or no
[/COLOR][COLOR=#0000bb]portlistpath[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# path from port.list
#NDS Example
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]CCCCCCCC[/COLOR][COLOR=#007700]] [/COLOR][COLOR=#ff8000]# nds hexserial (4 bytes)
[/COLOR][COLOR=#0000bb]emm[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]7 [/COLOR][COLOR=#ff8000]# 0=accept all 1=block emms 2=block emmu 4=block emmg
[/COLOR][COLOR=#0000bb]portlist[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# use portlist or no
[/COLOR][COLOR=#0000bb]portlistpath[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# path from port.list
[/COLOR][COLOR=#0000bb]boxid[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# if sbox can't get boxid from card, add here manually
#Conax Example
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]CCCCCCCC[/COLOR][COLOR=#007700]] [/COLOR][COLOR=#ff8000]# conax hexserial (4 bytes)
[/COLOR][COLOR=#0000bb]emm[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]7 [/COLOR][COLOR=#ff8000]# 0=accept all 1=block emms 2=block emmu 4=block emmg
[/COLOR][COLOR=#0000bb]portlist[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# use portlist or no
[/COLOR][COLOR=#0000bb]portlistpath[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# path from port.list
#Example configuration newcamd client
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]NewCamd[/COLOR][COLOR=#007700]]
[/COLOR][COLOR=#ff8000]#server0=dummy:dummy@localhost:15050/0102030405060708091011121314/0
#server1=dummy:dummy@localhost:15051/0102030405060708091011121314/2
#server2=dummy:dummy@localhost:15052/0102030405060708091011121314/7 [/COLOR][/COLOR]
Código:
[COLOR=#000000][COLOR=#0000bb]SA[/COLOR][COLOR=#007700]: { [/COLOR][COLOR=#0000bb]0001 [/COLOR][COLOR=#007700]} [/COLOR][COLOR=#ff8000]# Channel1
[/COLOR][COLOR=#0000bb]SA[/COLOR][COLOR=#007700]: { [/COLOR][COLOR=#0000bb]0002 [/COLOR][COLOR=#007700]} [/COLOR][COLOR=#ff8000]# Channel2
[/COLOR][COLOR=#0000bb]SA[/COLOR][COLOR=#007700]: { [/COLOR][COLOR=#0000bb]0003 [/COLOR][COLOR=#007700]} [/COLOR][COLOR=#ff8000]# Channel3
[/COLOR][COLOR=#0000bb]SA[/COLOR][COLOR=#007700]: { [/COLOR][COLOR=#0000bb]0004 [/COLOR][COLOR=#007700]} [/COLOR][COLOR=#ff8000]# Channel4 [/COLOR][/COLOR]
Código:
[COLOR=#000000][COLOR=#ff8000]#Example configuration file for sbox cardclient server
# [slot0] # slot to connect
# user=lonas # user
# pass=lonas # password
# au=1 # au on/off
# [slot1] # slot to connect
# user=lonas # user
# pass=lonas # password
# au=0 # au on/off [/COLOR][/COLOR]
No estaría mal si te sirvio esta imagen o otras mod lonas que nos ayudaras con una mini donación para poder seguir manteniendo este sitio y aportando cosas como estas...
Donaciones:
Lista de colaboradores: Lista de Donantes .:: Agradecimientos ::.
Si te gusta mi trabajo y quieres colaborar o invitarme a un café
Adjuntos
-
4,9 MB Visitas: 783
Última edición: