B
Bryan122
Usuario Registrado
- Registrado
- 20 Ago 2014
- Mensajes
- 1
- Reacciones
- 0
- Puntos
- 1
Hola a todos, estoy intentando configurar oscam y no hay manera. Sigo teniendo cortes.
Dejo por aqui los archivos de configuracion.
La version de oscam es esta:
OSCAM 1.20-unstable_svn build r9111
oscam.dvbapi
oscam.conf
oscam.user
oscam.server
Y aqui el log del corte
muchas gracias
saludos
Dejo por aqui los archivos de configuracion.
La version de oscam es esta:
OSCAM 1.20-unstable_svn build r9111
oscam.dvbapi
P: 1810:004101
P: 1810:000000
P: 1810:004001
P: 0100:004106
P: 0100:004108
P: 0100:005001
oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.00-svn build #5630
# Read more: gmc.to
[global]
disablelog = 1
disableuserfile = 1
#logfile = /media/usb/oscam/oscam.log
# first create the needed directory's and see if there is usb stick, cf or hdd
#usrfile = /media/usb/oscam/user.log
# first create the needed directory's and see if there is usb stick ,cf or hdd
#cwlogdir = /media/usb/oscam
# first create the needed directory's and see if there is usb stick ,cf or hdd
#emmlogdir = /media/usb/
# first create the needed directory's and see if there is usb stick ,cf or hdd
usrfileflag = 0
clienttimeout = 5
fallbacktimeout = 2500
serialreadertimeout = 1500
clientmaxidle = 120
dropdups = 1
failbantimE = 0
bindwait = 120
nice = -1
maxlogsize = 10
waitforcards = 0
waitforcards_extra_delay = 3000
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_reopen_mode = 1
lb_reopen_seconds = 6
lb_retrylimit = 1600
[monitor]
port = 16500
monlevel = 4
nocrypt = 127.0.0.1,192.168.1.0-192.168.1.254
[webif]
httpport = 16200
httpuser = user
httppwd = password
httprefresh = 20
httpallowed = 127.0.0.1,192.168.1.0-192.168.1.254,192.168.12.0-192.168.12.254
httphideidleclients = 0
httpreadonly = 0
[cccam]
port = 12000
version = 2.2.1
reshare = 3
reshare_mode = 4
ignorereshare = 0
minimizecards = 0
keepconnected = 1
nodeid = 0a0b0c0d0e0f1215
[dvbapi]
enabled = 1
au = 0
user = dvbapiau
boxtype = dreambox
request_mode = 0
decodeforever = 1
#[newcamd]
#key = 0102030405060708091011121314
#port = 34003@0500:FFF400,042800,042810
#keepalive = 1
#allowed = 127.0.0.1,192.168.65.206
#[radegast]
#port = 30000
#user = radegastuser
#allowed = 127.0.0.1,192.168.0.0-192.168.255.255
#[camd33]
#port = 40000
#serverip = 192.168.123.1
#key = 01020304050607080910111213141516
#[cs378x]
#port = 50000@0300:600000
#[gbox]
#hostname = host.example.com
#port = 60000
#password = mypassword
oscam.user
# oscam.user generated automatically by Streamboard OSCAM 1.00-svn build #5630
# Read more: gmc.to
# is needed for au
[account]
user = dvbapiau
pwd =
disabled = 0
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
# put all reader groups otherwise you not have ecm from the non included group.
uniq = 3
monlevel = 0
au = 1
# for using mpcsmon
[account]
user = usermonitor
pwd = pasword
disabled = 0
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,19,19,20,21
uniq = 1
sleep = 0
monlevel = 4
#[account]
#user = user2
#pwd = pasword2
#disabled = 0
#group = 1,2,3,4,5,6,7,8,9,10,11,13,14,15,16
#uniq = 3
#sleep = 0
#monlevel = 0
#service = !service1,!service2
#services defind in oscam.services if empty all services are allowed.
#cccmaxhops = 5
#cccreshare = 2 # note the difference with { 0:0:3 } from f line cccam .
#cccignorereshare = 0
#keepalive = 1
#hostname = cccam.example.cx
# f line in cccam would be like :
# F: user pasword2 5 0 0 { 0:0:3 } { } { } cccam.example.cx
# this users c line here server line in oscam.server has group 12 to avoid loop back I did not put group 12 in his user
# account f line. Normally it's not needed... However some svn versions can have segfault errors and jumps out due to that loopback.
# By doing this you will avoid that kind of problems.That's also the reason that i asign a different group to each reader.
oscam.server
#
# reader configuration
#
[reader]
label = remote1
enable = 1
protocol = cccam
device = server,puerto
user = user
password = pass
group = 1
cccversion = 2.1.1
emmcache = 1,3,2
cccreconnect = 1000
inactivitytimeout = 20
reconnecttimeout = 10
clienttimeout = 4
#this cannot modify ; only for CA
[reader]
label = smartcard
description = card
protocol = internal
device = /dev/smc0
boxkey = 1122334455667788
detect = cd
mhz = 372
cardmhz = 40000
group = 6
deprecated = 1
Y aqui el log del corte
2014/10/29 09:15:58 1AA540 c Start descrambling PID #0 (CAID: 1810) 1
2014/10/29 09:15:58 1AA540 c dvbapiau (1810&000000/0000/74D1/8E:2C4DC7A71593D2DA7552D75CF8B9CDB6): rejected group (1 ms) (no matching reader)
2014/10/29 09:15:58 1AA540 c dvbapiau (1810&000000/0000/74D1/8E:2C4DC7A71593D2DA7552D75CF8B9CDB6): rejected group (0 ms) (no matching reader)
2014/10/29 09:15:58 0 --- Skipped 1 duplicated log lines ---
2014/10/29 09:15:58 1AA540 c ERROR: Can't open device nullnull (errno=2 No such file or directory)
2014/10/29 09:15:58 0 --- Skipped 2 duplicated log lines ---
2014/10/29 09:15:58 1AA540 c Start descrambling PID #0 (CAID: 1810) 1
2014/10/29 09:15:58 1AA540 c dvbapiau (1810&000000/0000/74D1/8E:2C4DC7A71593D2DA7552D75CF8B9CDB6): rejected group (1 ms) (no matching reader)
2014/10/29 09:15:58 1AA540 c dvbapiau (1810&000000/0000/74D1/8E:2C4DC7A71593D2DA7552D75CF8B9CDB6): rejected group (0 ms) (no matching reader)
muchas gracias
saludos
Última edición: