Javilonas
Trovador Loco
Developer
- Registrado
- 10 Sep 2006
- Mensajes
- 25.305
- Reacciones
- 2.688
- Puntos
- 322
A continuación os detallo como proceder a sacar una copia de seguridad de vuestra imagen de manera fácil y sencilla.
1.- Lo primero que tenemos que hacer es descargar el script que os adjunto al final del post.
2.- Segundo es meterlo en el disco duro y darle permisos 755.
3.- Tercero es ejecutarlo del siguiente modo por telnet: sh /media/hdd/backup.sh /hdd (si es un usb cambiar hdd por usb)
4.- Esperar a que termine el proceso que puede tardar un poco.
5.- Una vez terminado tendremos nuestra copia de seguridad en /media/hdd/fullbackup_gigablue
Nada mas!!! fácil fácil para la familia
Log de ejemplo de lo que vais a ver por telnet antes y después de iniciar el script:
[TELNET]
root@gb800ueplus:~# sh /media/hdd/backup.sh /hdd
BACK-UP TOOL FOR GIGABLUE UEPLUS
Version 1.0
_________________________________________________
Please be patient, a backup will now be made,
because of the used filesystem the backup
will take about 5-12 minutes for this system
If you want to watch TV while backup is running
press the yellow key to hide/show the screen
_________________________________________________
Create: root.ubifs
ubinize: volume size was not specified in section "ubifs", assume minimum to fit image "/hdd/bi/root.ubi"72757248 bytes (69.4 MiB)
Create: kerneldump
ECC failed: 0
ECC corrected: 0
Number of bad blocks: 0
Number of bbt blocks: 0
Block size 131072, page size 2048, OOB size 64
Dumping data starting at 0x00000000 and ending at 0x00700000...
Check: kerneldump
Kernel dump OK
_________________________________________________
Almost there...
Now building the USB-Image
cp: can't stat '/usr/share/lcdwaitkey.bin': No such file or directory
cp: can't stat '/usr/share/lcdwarning.bin': No such file or directory
_________________________________________________\n
USB Image created on: /hdd/gigablue/ueplus
and there is made an extra copy on:
/hdd/fullbackup_gigablue/20140421_2110/gigablue
_________________________________________________\n
To restore the image: \n
Please check the manual of the receiver
or visit gigablue-support.com .
\nPlease wait...almost ready!
Time required for this process: 6:03
[/TELNET]
En mi caso no tenía los archivos lcd en sus directorios :
[TELNET]Almost there...
Now building the USB-Image
cp: can't stat '/usr/share/lcdwaitkey.bin': No such file or directory
cp: can't stat '/usr/share/lcdwarning.bin': No such file or directory[/TELNET]
por lo que no los ha copiado, por tanto tengo que meterlos en la copia de seguridad extrayéndolos de la OpenLD misma y arreando, si no los meto luego no me dará opción a poder flashear, así que no olvidaros de esto en caso de fallaros también.
------------------------------------
Update: 24/10/2015
Changelog: (versión 1.1)
Nueva versión con soporte para mas modelos gigablues.
1.- Lo primero que tenemos que hacer es descargar el script que os adjunto al final del post.
2.- Segundo es meterlo en el disco duro y darle permisos 755.
3.- Tercero es ejecutarlo del siguiente modo por telnet: sh /media/hdd/backup.sh /hdd (si es un usb cambiar hdd por usb)
4.- Esperar a que termine el proceso que puede tardar un poco.
5.- Una vez terminado tendremos nuestra copia de seguridad en /media/hdd/fullbackup_gigablue
Nada mas!!! fácil fácil para la familia
Log de ejemplo de lo que vais a ver por telnet antes y después de iniciar el script:
[TELNET]
root@gb800ueplus:~# sh /media/hdd/backup.sh /hdd
BACK-UP TOOL FOR GIGABLUE UEPLUS
Version 1.0
_________________________________________________
Please be patient, a backup will now be made,
because of the used filesystem the backup
will take about 5-12 minutes for this system
If you want to watch TV while backup is running
press the yellow key to hide/show the screen
_________________________________________________
Create: root.ubifs
ubinize: volume size was not specified in section "ubifs", assume minimum to fit image "/hdd/bi/root.ubi"72757248 bytes (69.4 MiB)
Create: kerneldump
ECC failed: 0
ECC corrected: 0
Number of bad blocks: 0
Number of bbt blocks: 0
Block size 131072, page size 2048, OOB size 64
Dumping data starting at 0x00000000 and ending at 0x00700000...
Check: kerneldump
Kernel dump OK
_________________________________________________
Almost there...
Now building the USB-Image
cp: can't stat '/usr/share/lcdwaitkey.bin': No such file or directory
cp: can't stat '/usr/share/lcdwarning.bin': No such file or directory
_________________________________________________\n
USB Image created on: /hdd/gigablue/ueplus
and there is made an extra copy on:
/hdd/fullbackup_gigablue/20140421_2110/gigablue
_________________________________________________\n
To restore the image: \n
Please check the manual of the receiver
or visit gigablue-support.com .
\nPlease wait...almost ready!
Time required for this process: 6:03
[/TELNET]
En mi caso no tenía los archivos lcd en sus directorios :
[TELNET]Almost there...
Now building the USB-Image
cp: can't stat '/usr/share/lcdwaitkey.bin': No such file or directory
cp: can't stat '/usr/share/lcdwarning.bin': No such file or directory[/TELNET]
por lo que no los ha copiado, por tanto tengo que meterlos en la copia de seguridad extrayéndolos de la OpenLD misma y arreando, si no los meto luego no me dará opción a poder flashear, así que no olvidaros de esto en caso de fallaros también.
------------------------------------
Update: 24/10/2015
Changelog: (versión 1.1)
Código:
Support for GbUltraUE/SE
Support for GBX1/X3
Nueva versión con soporte para mas modelos gigablues.
Adjuntos
-
10,6 KB Visitas: 106
Última edición: