S
santyago_
Amigo de Lonas
- Registrado
- 8 Ago 2011
- Mensajes
- 33
- Reacciones
- 0
- Puntos
- 9
Versión de OpenLD: 1.8
Modelo de Receptor: Vu+Solo SE
Descripción del fallo: Cuando llevo un tiempo viendo un mismo canal de repente se para la imagen. Aunque cambie de canal sigue igual, no se ve nada. Reinicio Oscam para que vuelva a verse la imagen y antes de que aparezca el mensaje "Deteniendo..." sale un pantallazo verde y se reinicia. Al reiniciarse vuelve a dar un pantallazo verde y ya nunca más vuelve a iniciar el deco, tengo que reinstalarlo todo.
Observaciones a tener en cuenta: No pasa en un tiempo de terminado, puede tardar 2 horas o 12, no he encontrado un patrón definido. He vuelto a la OpenLD 1.7 y parece que no pasa, pero aun no puedo asegurarlo hasta que pase un tiempo.
Archivo enigma2_crash:
Este es el crashlog del primer pantallazo verde:
Y este el crashlog del segundo pantallazo, cuando ya no arranca el deco:
Modelo de Receptor: Vu+Solo SE
Descripción del fallo: Cuando llevo un tiempo viendo un mismo canal de repente se para la imagen. Aunque cambie de canal sigue igual, no se ve nada. Reinicio Oscam para que vuelva a verse la imagen y antes de que aparezca el mensaje "Deteniendo..." sale un pantallazo verde y se reinicia. Al reiniciarse vuelve a dar un pantallazo verde y ya nunca más vuelve a iniciar el deco, tengo que reinstalarlo todo.
Observaciones a tener en cuenta: No pasa en un tiempo de terminado, puede tardar 2 horas o 12, no he encontrado un patrón definido. He vuelto a la OpenLD 1.7 y parece que no pasa, pero aun no puedo asegurarlo hasta que pase un tiempo.
Archivo enigma2_crash:
Este es el crashlog del primer pantallazo verde:
Código:
<?xml version="1.0" encoding="utf-8"?>
<openLD>
<enigma2>
<crashdate>dom nov 16 10:50:49 2014</crashdate>
<compiledate>Oct 26 2014</compiledate>
<contactemail>forum at www.lonasdigital.com</contactemail>
<!-- Please email this crashlog to above address -->
<skin>MetrixHD/skin.xml</skin>
<sourcedate>2014-10-25</sourcedate>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>solose</stbmodel>
<kernelversion>
<=!=[=C=D=A=T=A=[
Linux vusolose 3.13.5 #1 SMP Sun Oct 12 16:36:44 CEST 2014 mips GNU/Linux
]=]=>
</kernelversion>
<kernelcmdline>ubiroot rootflags=sync bmem=192M@64M bmem=160M@512M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs libata.force=1:1.5Gbps</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<=!=[=C=D=A=T=A=[
box_type=vusolose
build_type=0
version=1.8
build=0
date=20141027113536
comment=openLD
target=9
creator=OpenLD
url=http://www.lonasdigital.com
catalog=http://www.lonasdigital.com
]=]=>
</imageversion>
<imageissue>
<=!=[=C=D=A=T=A=[
[1;35m ---------------------------------------------------------
[1;35m - [1;32m Sitio Oficial: http://www.lonasdigital.com [1;35m -
[1;35m ---------------------------------------------------------
[1;32m %d Hora: %t
[1;32m OpenLD \n \l
[1;32m Kernel %r (%v).
[1;32m Bienvenido a tu \n! [0m
openld 1.8 %h
]=]=>
</imageissue>
</image>
<software>
<enigma2software>
<=!=[=C=D=A=T=A=[
Collected errors:
* opkg_conf_load: Creating temp dir /tmp/opkg-zxxyFe failed: No such file or directory.
]=]=>
</enigma2software>
<vuplussoftware>
<=!=[=C=D=A=T=A=[
Collected errors:
* opkg_conf_load: Creating temp dir /tmp/opkg-jQA9Sg failed: No such file or directory.
]=]=>
</vuplussoftware>
<gstreamersoftware>
<=!=[=C=D=A=T=A=[
Collected errors:
* opkg_conf_load: Creating temp dir /tmp/opkg-KyZlch failed: No such file or directory.
]=]=>
</gstreamersoftware>
</software>
<crashlogs>
<enigma2crashlog>
<=!=[=C=D=A=T=A=[
apter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xa7) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x35) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles page ffffffffffffffff (und)
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
[eDVBCAService] new service 1:0:1:760E:408:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:760E:408:1:C00000:0:0:0:
not enough diskspace for timeshift! (less than 1GB)
RemovePopup, id = ZapError
PATready
use pmtpid 041d for service_id 760e
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (00a7), and 2 audio stream(s) (006c, 006d), and the pcr pid is 00a7, and the text pid is 0035
decoder state: play, vpid=167, apid=108
[eDVBCIInterfaces] gotPMT
[Dish] tuned, closing...
not enough diskspace for timeshift! (less than 1GB)
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
sdt update done!
1 192 1
KEY: 402 KEY_CHANNELUP BOUQUET+ 2014-11-16 10:50:34.120661
action -> InfobarChannelSelection ChannelPlusPressed
playing 1:0:1:7731:416:1:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:760E:408:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:760E:408:1:C00000:0:0:0:
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
[SCREENNAME] InfoBar
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x2642050
[eEPGCache] remove channel 0x2642050
allocate channel.. 0416:0001
(0)tune
Entry for 19,2? not in Rotor Table found... i try gotoXX?
siteLatitude = 37.183998, siteLongitude = 356.406000, 19.200000 degrees
PolarmountHourAngle=154.203782
RotorCmd = e19d
RotorCmd e19d, lastRotorCmd e19d
prepare_sat System 0 Freq 11156000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1406 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:7731:416:1:C00000:0:0:0:
allocate demux
[SEC] set static current limiting
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
0 192 1
KEY: 402 KEY_CHANNELUP BOUQUET+ 2014-11-16 10:50:34.611027
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x2642050 running
[eEPGCache] channel 0x2642050 running
stop release channel timer
[EPGC] next update in 2 sec
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (00ab), and 1 audio stream(s) (007c), and the pcr pid is 00ab, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=171, apid=124
DMX_SET_PES_FILTER(0xab) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x7c) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xab) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles page ffffffffffffffff (und)
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
[eDVBCAService] new service 1:0:1:7731:416:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:7731:416:1:C00000:0:0:0:
RemovePopup, id = ZapError
PATready
use pmtpid 0410 for service_id 7731
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
eventNewProgramInfo 0 0
have 1 video stream(s) (00ab), and 2 audio stream(s) (007c, 007d), and the pcr pid is 00ab, and the text pid is ffffffff
decoder state: play, vpid=171, apid=124
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
[eDVBCIInterfaces] gotPMT
[SEC] set dynamic current limiting
[Dish] tuned, closing...
sdt update done!
[EPGC] start caching events(1416131436)
1 193 1
KEY: 403 KEY_CHANNELDOWN BOUQUET- 2014-11-16 10:50:38.505103
action -> InfobarChannelSelection ChannelMinusPressed
playing 1:0:1:760E:408:1:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:7731:416:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:7731:416:1:C00000:0:0:0:
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
[SCREENNAME] InfoBar
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x2642050
[eEPGCache] remove channel 0x2642050
[EPGC] abort caching events !!
allocate channel.. 0408:0001
(0)tune
Entry for 19,2? not in Rotor Table found... i try gotoXX?
siteLatitude = 37.183998, siteLongitude = 356.406000, 19.200000 degrees
PolarmountHourAngle=154.203782
RotorCmd = e19d
RotorCmd e19d, lastRotorCmd e19d
prepare_sat System 0 Freq 11685000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1935 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:760E:408:1:C00000:0:0:0:
allocate demux
[SEC] set static current limiting
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
0 193 1
KEY: 403 KEY_CHANNELDOWN BOUQUET- 2014-11-16 10:50:39.019474
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x2642050 running
[eEPGCache] channel 0x2642050 running
[EPGC] next update in 13 min
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (00a7), and 1 audio stream(s) (006c), and the pcr pid is 00a7, and the text pid is 0035
allocate demux
decoder state: play, vpid=167, apid=108
DMX_SET_PES_FILTER(0xa7) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x6c) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xa7) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x35) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles page ffffffffffffffff (und)
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
[eDVBCAService] new service 1:0:1:760E:408:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:760E:408:1:C00000:0:0:0:
not enough diskspace for timeshift! (less than 1GB)
RemovePopup, id = ZapError
PATready
use pmtpid 041d for service_id 760e
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (00a7), and 2 audio stream(s) (006c, 006d), and the pcr pid is 00a7, and the text pid is 0035
decoder state: play, vpid=167, apid=108
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[Dish] tuned, closing...
not enough diskspace for timeshift! (less than 1GB)
sdt update done!
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
1 193 1
KEY: 403 KEY_CHANNELDOWN BOUQUET- 2014-11-16 10:50:42.525157
action -> InfobarChannelSelection ChannelMinusPressed
playing 1:0:1:77D8:40A:1:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:760E:408:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:760E:408:1:C00000:0:0:0:
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
[SCREENNAME] InfoBar
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x2642050
[eEPGCache] remove channel 0x2642050
allocate channel.. 040a:0001
(0)tune
Entry for 19,2? not in Rotor Table found... i try gotoXX?
siteLatitude = 37.183998, siteLongitude = 356.406000, 19.200000 degrees
PolarmountHourAngle=154.203782
RotorCmd = e19d
RotorCmd e19d, lastRotorCmd e19d
prepare_sat System 0 Freq 10979000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1229 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:77D8:40A:1:C00000:0:0:0:
allocate demux
[SEC] set static current limiting
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
0 193 1
KEY: 403 KEY_CHANNELDOWN BOUQUET- 2014-11-16 10:50:43.005296
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x2642050 running
[eEPGCache] channel 0x2642050 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
[EPGC] next update in 36 min
have 1 video stream(s) (00a8), and 1 audio stream(s) (0070), and the pcr pid is 00a8, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=168, apid=112
DMX_SET_PES_FILTER(0xa8) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x70) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xa8) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles page ffffffffffffffff (und)
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
setPixmapNum(0) failed! defined pixmaps: []
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
[eDVBCAService] new service 1:0:1:77D8:40A:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:77D8:40A:1:C00000:0:0:0:
RemovePopup, id = ZapError
PATready
use pmtpid 040b for service_id 77d8
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (00a8), and 2 audio stream(s) (0070, 0071), and the pcr pid is 00a8, and the text pid is ffffffff
decoder state: play, vpid=168, apid=112
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
[eDVBCIInterfaces] gotPMT
[Dish] tuned, closing...
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
1 160 1
KEY: 352 KEY_OK OK 2014-11-16 10:50:44.740111
action -> InfobarShowHideActions toggleShow
[SCREENNAME] SecondInfoBarECM
sdt update done!
0 160 1
KEY: 352 KEY_OK OK 2014-11-16 10:50:44.971833
1 ae 1
KEY: 174 KEY_EXIT EXIT 2014-11-16 10:50:46.725598
action -> InfobarShowHideActions hide
0 ae 1
KEY: 174 KEY_EXIT EXIT 2014-11-16 10:50:46.957503
1 191 1
KEY: 401 KEY_BLUE BLUE 2014-11-16 10:50:47.725503
0 191 1
KEY: 401 KEY_BLUE BLUE 2014-11-16 10:50:47.956594
action -> LDBluePanel ldteam
[SKIN] Parsing embedded skin <embedded-in-'LDBluePanel'>
[SCREENNAME] ['LDBluePanel_summary', 'SimpleSummary']
[SCREENNAME] LDBluePanel
not enough diskspace for timeshift! (less than 1GB)
not enough diskspace for timeshift! (less than 1GB)
1 160 1
KEY: 352 KEY_OK OK 2014-11-16 10:50:49.935835
action -> OkCancelActions ok
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 48, in action
File "/usr/lib/enigma2/python/Plugins/Extensions/LDteam/LdBlue.py", line 182, in keyOk
File "/usr/lib/enigma2/python/Plugins/Extensions/LDteam/LdBlue.py", line 195, in sendtoLd_sock
File "/usr/lib/python2.7/socket.py", line 224, in meth
socket.error: [Errno 2] No such file or directory
(PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x2895df0>>,('OkCancelActions', 'ok')) failed)
]=]=>
</enigma2crashlog>
</crashlogs>
</openLD>
Código:
<?xml version="1.0" encoding="utf-8"?>
<openLD>
<enigma2>
<crashdate>dom nov 16 10:51:21 2014</crashdate>
<compiledate>Oct 26 2014</compiledate>
<contactemail>forum at www.lonasdigital.com</contactemail>
<!-- Please email this crashlog to above address -->
<skin>Default Skin</skin>
<sourcedate>2014-10-25</sourcedate>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>solose</stbmodel>
<kernelversion>
<=!=[=C=D=A=T=A=[
Linux vusolose 3.13.5 #1 SMP Sun Oct 12 16:36:44 CEST 2014 mips GNU/Linux
]=]=>
</kernelversion>
<kernelcmdline>ubiroot rootflags=sync bmem=192M@64M bmem=160M@512M ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs libata.force=1:1.5Gbps</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<=!=[=C=D=A=T=A=[
box_type=vusolose
build_type=0
version=1.8
build=0
date=20141027113536
comment=openLD
target=9
creator=OpenLD
url=http://www.lonasdigital.com
catalog=http://www.lonasdigital.com
]=]=>
</imageversion>
<imageissue>
<=!=[=C=D=A=T=A=[
[1;35m ---------------------------------------------------------
[1;35m - [1;32m Sitio Oficial: http://www.lonasdigital.com [1;35m -
[1;35m ---------------------------------------------------------
[1;32m %d Hora: %t
[1;32m OpenLD \n \l
[1;32m Kernel %r (%v).
[1;32m Bienvenido a tu \n! [0m
openld 1.8 %h
]=]=>
</imageissue>
</image>
<software>
<enigma2software>
<=!=[=C=D=A=T=A=[
Collected errors:
* opkg_conf_load: Creating temp dir /tmp/opkg-klXjQP failed: No such file or directory.
]=]=>
</enigma2software>
<vuplussoftware>
<=!=[=C=D=A=T=A=[
Collected errors:
* opkg_conf_load: Creating temp dir /tmp/opkg-e7VdWQ failed: No such file or directory.
]=]=>
</vuplussoftware>
<gstreamersoftware>
<=!=[=C=D=A=T=A=[
Collected errors:
* opkg_conf_load: Creating temp dir /tmp/opkg-yKVfTS failed: No such file or directory.
]=]=>
</gstreamersoftware>
</software>
<crashlogs>
<enigma2crashlog>
<=!=[=C=D=A=T=A=[
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
21600k video mem
setting /dev/tty0 status failed.
- double buffering available!
10800kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 7680)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x7ca2d8 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
+ (21) input device driver
Input device "dreambox advanced remote control (native)" is a keyboard
Found 1 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
[SERVERSOCKET] ERROR on bind() (No such file or directory)
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 1132 channels/transponders and 13686 services
linking adapter1/frontend0 to vtuner0
linking adapter2/frontend0 to vtuner1
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
opening frontend 2
close frontend 2
found 3 adapter, 3 frontends(3 sim) and 5 demux, boxtype 4
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/share/enigma2/spinner/wait8.png
found 7 spinner!
setIoPrio best-effort level 3 ok
couldn't open /proc/stb/misc/12V_output
[Harddisk] enumerating block devices...
[Harddisk] enumerating network mounts...
Reading satellites.xml
Reading cables.xml
Reading terrestrial.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Vuplus DVB-S NIM(AVL6211), need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr SCEH-0036, need rotorworkaround No, enabled Yes, DVB-S2 No
setSlotInfo for dvb frontend 2 to slotid 2, descr SCEH-0036, need rotorworkaround No, enabled Yes, DVB-S2 No
slot: 0 configmode: simple
diseqcmode: positioner
Add sat 31
Add sat 48
Add sat 70
Add sat 90
Add sat 100
Add sat 130
Add sat 160
Add sat 192
Add sat 216
Add sat 235
Add sat 260
Add sat 282
Add sat 315
Add sat 330
Add sat 360
Add sat 390
Add sat 420
Add sat 450
Add sat 460
Add sat 525
Add sat 530
Add sat 549
Add sat 570
Add sat 620
Add sat 660
Add sat 685
Add sat 3150
Add sat 3300
Add sat 3325
Add sat 3355
Add sat 3380
Add sat 3420
Add sat 3450
Add sat 3475
Add sat 3490
Add sat 3520
Add sat 3530
Add sat 3550
Add sat 3560
Add sat 3592
sec config completed
[NimManager] slot name=Vuplus DVB-S NIM(AVL6211)
[NimManager] multiType = True
[NimManager] slot name=SCEH-0036
[NimManager] multiType = True
[NimManager] slot name=SCEH-0036
[NimManager] multiType = True
main thread is non-idle! display spinner!
[Picon] adding path: /usr/share/enigma2/picon/
[Time By]: Transponder
[EPGC] time updated.. but cache file not set yet.. dont start epg!!
[FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
[FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
[FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00f_MoviePlayer.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00g_EMC.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openld.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xml
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (Regular)
[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (RegularLight)
[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD)
[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
Activating language Español
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: panscan
[VideoMode] setting policy2: letterbox
cannot open /proc/stb/avs/0/input_choices
[VideoMode] setting scaler_sharpness to: 0000000D
[VideoMode] setMode - port: HDMI, mode: 1080p, rate: multi
[EPGC Load] Poller disabled.
[EPGC Save] Poller disabled.
[EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[EPGC] 639 events read from /etc/enigma2/epg.dat
Setting OSD position: 12 696 10 557
Setting OSD alpha: 255
Setting 3D mode: auto
Setting 3D depth: 50
[EPGC Save] Poller disabled.
[EPGC Load] Poller disabled.
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
Plugin Extensions/WebInterface failed to load: No module named plugin
[TranscodingSetup] set /proc/stb/encoder/enable to enable
[TranscodingSetup] set /proc/stb/encoder/0/bitrate to 400000
[TranscodingSetup] set /proc/stb/encoder/0/framerate to 50000
[TranscodingSetup] set port 8002
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> setting splitmode to: off
--> setting sharpness to: 00000000
--> setting auto_flesh to: 00000000
--> setting green_boost to: 00000000
--> setting blue_boost to: 00000000
--> setting dynamic_contrast to: 00000000
--> setting color_soace to: Edid(Auto)
--> setting scaler_vertical_dejagging to: disable
--> setting smooth to: disable
--> applying pep values
<RemoteControlCode> Write Remote Control Code : 2
[EPGImport] autostart (0) occured at 1416131481.46
[AutoTimer] Auto Poll Enabled
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 1 CI Slots
[CI_Activate_Config_CI0] no config file found
[CI_Activate_Config_CI0] error parsing xml...
starting hotplug handler
EXCEPTION IN PYTHON STARTUP CODE:
------------------------------------------------------------
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 771, in <module>
runScreenTest()
File "/usr/lib/enigma2/python/mytest.py", line 515, in runScreenTest
plugins.readPluginList(resolveFilename(SCOPE_PLUGINS))
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 104, in readPluginList
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 30, in addPlugin
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Hotplug/plugin.py", line 67, in autostart
File "/usr/lib/python2.7/site-packages/twisted/internet/posixbase.py", line 408, in listenUNIX
p.startListening()
File "/usr/lib/python2.7/site-packages/twisted/internet/unix.py", line 293, in startListening
raise CannotListenError, (None, self.port, le)
CannotListenError: Couldn't listen on any:/tmp/hotplug.socket: [Errno 2] No such file or directory.
[mytest.py] quitMainloop #4
------------------------------------------------------------
(exit code 5)
]=]=>
</enigma2crashlog>
</crashlogs>
</openLD>
Última edición: