dcano2
Usuario Avanzado
- Registrado
- 4 Jun 2010
- Mensajes
- 878
- Reacciones
- 0
- Puntos
- 19
sbox.conf:by dcano2 con esta config funciona la card Tiger
sbox.conf:
server_only=1 # 0=emu+newcamd server 1=only newcamd server
log=1 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath=/var/bin/users.sbox # users list
webinterface=1 # 1eb interface on 0eb interface off
webport=8181 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=15050 # newcamd port
mhz=368 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader
# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!
#Nagra2/3 Example
[CCCCCCCC] # nagra2 camid (4 bytes)
rsa= # rsa "n" from this card (like newcs)
boxkey= # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/var/****/port.list # path from port.list
Nagra tiger/ncmed Example
[nº card en hex] # nagra camid (4 bytes)
emm=2 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
[TIGER601]
rsa=D8E72...DE55B
#emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
#Seca Example
[CCCCCCCC] # seca camid (4 bytes)
ok_view=0 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Viaccess Example
[CCCCCCCC] # via camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
aeskey= # aeskey used by nano d2
#Irdeto Example
[CCCCCCCC] # irdeto camid (4 bytes)
camkey=0000000000000000 # CamKEY
camkeydata=00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#NDS Example
[CCCCCCCC] # nds camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
boxid= # if sbox can't get boxid from card, add here manually
#Conax Example
[CCCCCCCC] # conax camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Example configuration newcamd client
[NewCamd]
#server0=dummy:dummy@localhost:15050/0102030405060708091011121314/0
#server1=dummy:dummy@localhost:15051/0102030405060708091011121314/2
#server2=dummy:dummy@localhost:15052/0102030405060708091011121314/7
sbox.conf:
server_only=1 # 0=emu+newcamd server 1=only newcamd server
log=1 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath=/var/bin/users.sbox # users list
webinterface=1 # 1eb interface on 0eb interface off
webport=8181 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=15050 # newcamd port
mhz=368 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader
# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!
#Nagra2/3 Example
[CCCCCCCC] # nagra2 camid (4 bytes)
rsa= # rsa "n" from this card (like newcs)
boxkey= # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/var/****/port.list # path from port.list
Nagra tiger/ncmed Example
[nº card en hex] # nagra camid (4 bytes)
emm=2 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
[TIGER601]
rsa=D8E72...DE55B
#emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
#Seca Example
[CCCCCCCC] # seca camid (4 bytes)
ok_view=0 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Viaccess Example
[CCCCCCCC] # via camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
aeskey= # aeskey used by nano d2
#Irdeto Example
[CCCCCCCC] # irdeto camid (4 bytes)
camkey=0000000000000000 # CamKEY
camkeydata=00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#NDS Example
[CCCCCCCC] # nds camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
boxid= # if sbox can't get boxid from card, add here manually
#Conax Example
[CCCCCCCC] # conax camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Example configuration newcamd client
[NewCamd]
#server0=dummy:dummy@localhost:15050/0102030405060708091011121314/0
#server1=dummy:dummy@localhost:15051/0102030405060708091011121314/2
#server2=dummy:dummy@localhost:15052/0102030405060708091011121314/7