Javilonas
Trovador Loco
Developer
- Registrado
- 10 Sep 2006
- Mensajes
- 25.306
- Reacciones
- 2.689
- Puntos
- 322
Nabilo v8 Mod lonas v4 mbox 023.4.r - Sbox
Como me la han solicitado ya algunos compis para el tema de las card y su actualización aquí os traigo la misma imagen mod lonas v4 pero con sbox configurada para meter card ceniza con la chapa para abajo,
Recuerda que en sbox hay que añadir tu serial de la card en el archivo sbox.conf en HEX.
Cargada por flaswizard sin problemas pero sigo recomendando el dreamup que teneis por el foro para la carga de estas imagenes.
- Nuevo Bootlogo de arranque.
- Solo 18% ocupado en /var (recieninstalada, luego con algun otro plugin se me quedo a 30%).
- Nuevo Skin por defecto Rihana_NET modificado para Mbox04 (incluye d1 y d2 en pantalla).
- Optimización de la imagen completamente, eliminando todo lo que esta en desuso.
- instaladas Emus Mbox04 (023.4.r) y sbox (lista para meter la card con la chapa pa bajo y rular).
- Instalados scripts : Borrafakes de el compi cthulhufhtagn + el plugin Borraoffs.
- Añadidos en /var/keys/ ident.info e ignore.list actualizados a la fecha.
- Las Emus... fueron instaladas en el directorio / (root)
- las Rutas de las Emus cambiaron y ahora son /bin/mbox y /bin/sbox (ojo al configurar el mbox control center y recordar esto).
- Cwshare preconfigurado con linea C solo para añadir tus dlines a este (no lo sustituyas por el tuyo,solo añade tus dlines y elimina las que estan,recuerda dejar la linea C para leer la card y añadir tu provider)
- para que funcione el de standby recuerda modificar el scrpt stamdby.sh y sustituir donde pone dreambox por tu password de tu dream o no funcionará si cambiaste el password si no cambiaste nada no cambies nada.
- La Imagen esta optimizada para Mbox virtual o local, solo teneis que meterle la lista de canales y a disfrutarla.
- Plugin Mbox Center para ver estadisticas,colores,card,etc... (pulsar boton amarillo para acceder a este)
- Por defecto está solo en Mbox por lo que tendras que ir al boton azul de el mando y seleccionar mbox + sbox para que te lea tu card
- La imagen está preconfigurada para leer una card Ceniza de la tierra si quieres que lea otra cambia los providers por el tuyo en la linea C y añade también lo que coresponda en el 50000.list de la carpéta keys modificándo las lineas G por los que correspónden a tu providers.
- esta imagen se le a respetado todo el interfaz web por lo que no se a eliminádo nada de el 100 por 100 nabilo.
- reinicia sola a las 4:20 de la mañana y a las 4:45 se pone sola en standby (recuerda ponerle tu password al script) si deseas modificar esto accede a el nabcron.dat dentro de /var/etc/ y lo editas o bien desde el mando boton azul y boton azul de nuevo.
- Corregido un par de bugs que tenía las versiones anteriores de nabilo v8 esta es mucho mas estable que la v3 incluso y no tiene tantas tonterias.
- el script startscript.sh esta añadido al arranque por loq ue cada vez que arranque o reincie la dream este iniciará loq ue le metais dentro a el mismo script, por le momento solo tiene introducido el borraoff y el borrafakes los cuales mediante un sleep de 3600 segundos (unas hora) empiezan a funcionar de este modo evitamos que la dream se cuelgue nada mas iniciar ya que estos no inician a la misma paz que las emus, le hemos dado una hora de margen entre el arranque de las emus y el script para que no se quede colgada así deja que el mbox haga su funcion de hello y esas cositas.
Recordar actualizar el ident.info e ignore.list por el de el hilo especifico para ello en el foro,
no se si me olvido de algo mas pero si me acuerdo lo pondre sobre la marcha....
recordar que la configuración para el Mbox control center ahora es esta:
Código:
Nombre de archivo: mbox
direccion ip: la tuya jeje
Ruta Mbox: /bin
Ruta Keys: /var/keys
Ruta Temp: /tmp
Ruta Mbox cfg: /var/keys/mbox.cfg
LA IMAGEN ESTA PREPARADA Y CONFIGURADA PARA UNA CARD GRIS CENIZA A FALTA DE AÑADIR VUESTRO SERIAL EN HEX PERO SI POR LO QUE SEA VUESTRAS CARD SON OTRAS POR EJEMPLO VIACCES PODEIS VER AQUÍ LAS CONFIG DE CADA UNA:
sbox.conf
Código:
[COLOR=#000000][COLOR=#007700][[/COLOR][COLOR=#0000bb]main[/COLOR][COLOR=#007700]]
[/COLOR][COLOR=#0000bb]server_only[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# 0=emu+newcamd server 1=only newcamd server
[/COLOR][COLOR=#0000bb]log[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
[/COLOR][COLOR=#0000bb]userspath[/COLOR][COLOR=#007700]=/var/[/COLOR][COLOR=#0000bb]bin[/COLOR][COLOR=#007700]/[/COLOR][COLOR=#0000bb]users[/COLOR][COLOR=#007700].[/COLOR][COLOR=#0000bb]sbox [/COLOR][COLOR=#ff8000]# users list
[/COLOR][COLOR=#0000bb]webinterface[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# 1=web interface on 0=web interface off
[/COLOR][COLOR=#0000bb]webport[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]8181 [/COLOR][COLOR=#ff8000]# web interface port
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]slot0[/COLOR][COLOR=#007700]]
[/COLOR][COLOR=#0000bb]active[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]1 [/COLOR][COLOR=#ff8000]# 0=inactive 1=active
[/COLOR][COLOR=#0000bb]sci[/COLOR][COLOR=#007700]=/[/COLOR][COLOR=#0000bb]dev[/COLOR][COLOR=#007700]/[/COLOR][COLOR=#0000bb]sci0 [/COLOR][COLOR=#ff8000]# lower
[/COLOR][COLOR=#0000bb]ncdserver[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# 0=newcamd server off 1=newcamd server on
[/COLOR][COLOR=#0000bb]deskey[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0102030405060708091011121314 [/COLOR][COLOR=#ff8000]# newcamd deskey
[/COLOR][COLOR=#0000bb]port[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]50000 [/COLOR][COLOR=#ff8000]# newcamd port
[/COLOR][COLOR=#0000bb]mhz[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!
#Nagra2/3 Example
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]CCCCCCCC[/COLOR][COLOR=#007700]] [/COLOR][COLOR=#ff8000]# nagra2 hexserial (4 bytes)
[/COLOR][COLOR=#0000bb]rsa[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# rsa "n" from this card (like newcs)
[/COLOR][COLOR=#0000bb]boxkey[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# boxkey from this card
[/COLOR][COLOR=#0000bb]emm[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# 0=accept all 1=block emms 2=block emmu 4=block emmg
[/COLOR][COLOR=#0000bb]portlist[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# use portlist or no
[/COLOR][COLOR=#0000bb]portlistpath[/COLOR][COLOR=#007700]=/var[/COLOR][COLOR=#ff8000]/****/[/COLOR][COLOR=#0000bb]port[/COLOR][COLOR=#007700].list [/COLOR][COLOR=#ff8000]# path from port.list
#Nagra tiger/ncmed Example
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]CCCCCCCC[/COLOR][COLOR=#007700]] [/COLOR][COLOR=#ff8000]# nagra hexserial (4 bytes)
[/COLOR][COLOR=#0000bb]emm[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]2 [/COLOR][COLOR=#ff8000]# 0=accept all 1=block emms 2=block emmu 4=block emmg
[/COLOR][COLOR=#0000bb]portlist[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# use portlist or no
[/COLOR][COLOR=#0000bb]portlistpath[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# path from port.list
#Seca Example
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]CCCCCCCC[/COLOR][COLOR=#007700]] [/COLOR][COLOR=#ff8000]# seca hexserial (4 bytes)
[/COLOR][COLOR=#0000bb]ok_view[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
[/COLOR][COLOR=#0000bb]emm[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]7 [/COLOR][COLOR=#ff8000]# 0=accept all 1=block emms 2=block emmu 4=block emmg
[/COLOR][COLOR=#0000bb]portlist[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# use portlist or no
[/COLOR][COLOR=#0000bb]portlistpath[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# path from port.list
#Viaccess Example
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]CCCCCCCC[/COLOR][COLOR=#007700]] [/COLOR][COLOR=#ff8000]# via hexserial (4 bytes)
[/COLOR][COLOR=#0000bb]emm[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]7 [/COLOR][COLOR=#ff8000]# 0=accept all 1=block emms 2=block emmu 4=block emmg
[/COLOR][COLOR=#0000bb]portlist[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# use portlist or no
[/COLOR][COLOR=#0000bb]portlistpath[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# path from port.list
[/COLOR][COLOR=#0000bb]aeskey[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# aeskey used by nano d2
#Irdeto Example
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]CCCCCCCC[/COLOR][COLOR=#007700]] [/COLOR][COLOR=#ff8000]# irdeto hexserial (4 bytes)
[/COLOR][COLOR=#0000bb]camkey[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0000000000000000 [/COLOR][COLOR=#ff8000]# CamKEY
[/COLOR][COLOR=#0000bb]camkeydata[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
emm[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]7 [/COLOR][COLOR=#ff8000]# 0=accept all 1=block emms 2=block emmu 4=block emmg
[/COLOR][COLOR=#0000bb]portlist[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# use portlist or no
[/COLOR][COLOR=#0000bb]portlistpath[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# path from port.list
#NDS Example
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]CCCCCCCC[/COLOR][COLOR=#007700]] [/COLOR][COLOR=#ff8000]# nds hexserial (4 bytes)
[/COLOR][COLOR=#0000bb]emm[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]7 [/COLOR][COLOR=#ff8000]# 0=accept all 1=block emms 2=block emmu 4=block emmg
[/COLOR][COLOR=#0000bb]portlist[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# use portlist or no
[/COLOR][COLOR=#0000bb]portlistpath[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# path from port.list
[/COLOR][COLOR=#0000bb]boxid[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# if sbox can't get boxid from card, add here manually
#Conax Example
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]CCCCCCCC[/COLOR][COLOR=#007700]] [/COLOR][COLOR=#ff8000]# conax hexserial (4 bytes)
[/COLOR][COLOR=#0000bb]emm[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]7 [/COLOR][COLOR=#ff8000]# 0=accept all 1=block emms 2=block emmu 4=block emmg
[/COLOR][COLOR=#0000bb]portlist[/COLOR][COLOR=#007700]=[/COLOR][COLOR=#0000bb]0 [/COLOR][COLOR=#ff8000]# use portlist or no
[/COLOR][COLOR=#0000bb]portlistpath[/COLOR][COLOR=#007700]= [/COLOR][COLOR=#ff8000]# path from port.list
#Example configuration newcamd client
[/COLOR][COLOR=#007700][[/COLOR][COLOR=#0000bb]NewCamd[/COLOR][COLOR=#007700]]
[/COLOR][COLOR=#ff8000]#server0=dummy:dummy@localhost:15050/0102030405060708091011121314/0
#server1=dummy:dummy@localhost:15051/0102030405060708091011121314/2
#server2=dummy:dummy@localhost:15052/0102030405060708091011121314/7 [/COLOR][/COLOR]
Código:
[COLOR=#000000][COLOR=#0000bb]SA[/COLOR][COLOR=#007700]: { [/COLOR][COLOR=#0000bb]0001 [/COLOR][COLOR=#007700]} [/COLOR][COLOR=#ff8000]# Channel1
[/COLOR][COLOR=#0000bb]SA[/COLOR][COLOR=#007700]: { [/COLOR][COLOR=#0000bb]0002 [/COLOR][COLOR=#007700]} [/COLOR][COLOR=#ff8000]# Channel2
[/COLOR][COLOR=#0000bb]SA[/COLOR][COLOR=#007700]: { [/COLOR][COLOR=#0000bb]0003 [/COLOR][COLOR=#007700]} [/COLOR][COLOR=#ff8000]# Channel3
[/COLOR][COLOR=#0000bb]SA[/COLOR][COLOR=#007700]: { [/COLOR][COLOR=#0000bb]0004 [/COLOR][COLOR=#007700]} [/COLOR][COLOR=#ff8000]# Channel4 [/COLOR][/COLOR]
Código:
[COLOR=#000000][COLOR=#ff8000]#Example configuration file for sbox cardclient server
# [slot0] # slot to connect
# user=lonas # user
# pass=lonas # password
# au=1 # au on/off
# [slot1] # slot to connect
# user=lonas # user
# pass=lonas # password
# au=0 # au on/off [/COLOR][/COLOR]
No estaría mal si te sirvio esta imagen o otras mod lonas que nos ayudaras con una mini donación para poder seguir manteniendo este sitio y aportando cosas como estas..
Donaciones son agradecidas
Adjuntos
-
4,6 MB Visitas: 599