[Como] Actualizar y visionar tu abono/tarjeta via MgCamd (Ampliando horizontes CCcam)

# EMM messages
#00 don't show any EMMs (default)
#01 show only valid EMMs
#02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
#00 don't show anything about ecm
#01 normal mode, show pids processed, decoded ecm and cw
#02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#00 disable, no emm pids processed
#01 enable, emm pids always processed for soft-au and shared cards
#02 auto, emm started only if channel cant be decoded
#03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
#01 update only new keys, default setting
#02 update all keys (used for valid PMK checking)
#04 enable TPS au
#+ tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
#00 files in /var/keys
#01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#00 no network (default)
#01 newcamd netclient
#02 radegast netclient
#04 camd3 netclient
#08 gbox netclient
#32cccamd netclient, card list saved as /tmp/cccamd.info 
#(ECM only, supported server version up to 2.1.1, later not work)
G: { 33 } #asi funciona de visor (todo cccam + card) y ademas actualiza

# network retry, use summ for several options
#00 disable
#01 retry every new ecm
#02 try to connect to offline shares every Q: seconds
#04 try to detect and fast reconnect to lost (and not used atm) server
#+ XX messages number and YY seconds to reconnect
#mg will reconnect to server, if no answer to last XX ecm/keepalive or
#if no answer for last ecm or keepalive sent for YY seconds
#set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 } #asi para #G: { 33 } y explicacion

# on screen display type
#00 No OSD (default)
#01 neutrino
#02 enigma
#03 relook
#+ user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
#01 show emu ecm 
#02 show network shares messages
#04 show decoding failed / fta
#08 show emm keys update
#+ web port to use for osd
S: { 03 } 80

# Log option, summ of:
#00 off
#01 network udp log
#02 log to console
#04 file, appended ! delete it by yourself, before it eat all your hdd
#+ IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
#00 Off (default)
#01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#02 Ecm data cache, remember CW for (E:) time 
#04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of: 
#00 No (default)
#01 reread config file on channel change (including priority and ignore, but not replace/cache)
#02 reread SoftCam.Key on channel change
#04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
##CWS = 192.168.1.1 20000 dummy dummy 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server1
##CWS_MULTIPLE = 192.168.1.2 20000:20005 dummy dummy 10 02 13 04 15 06 17 08 01 10 11 12 13 14 lan server2
CWS = 127.0.0.1 14000 mgcamd mgcampass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan

[main]
server_only=1 # 0=emu+newcamd server 1=only newcamd server
log=0                   #1=no log 1=log to /tmp/sbox.log//ALWAYS USE 0//
logudp=192.168.1.X:5042 # server ip:server port
userspath=/usr/bin/users.sbox # users list
webinterface=1 # 1=web interface on 0=web interface off
webadmin=admin:pass # user:pass for webinterface
webport=8081                   #web interface port
rdgserver=0                         # 0=radegast server off 1=radegast server on
rdgport=16050                  # radegast server port
use_nagra=1     # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)

[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0       # lower
ncdserver=1   # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=14000      # newcamd port
mhz=368    # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368 
reader=1     # 0=phoenix, 1=sci (internal reader), 2=smartreader
cache=10          # how many ecms can be cached, 0 or less=cache disabled

#Nagra tiger/ncmed Example
[TIGER601]      # ROM Nagravision tiger
rsa=D8************2DE55B
[XXXXXXXX] # nagra camid (4 bytes) CamID
emm=0    # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=1                                  # use portlist or no=0
portlistpath=/usr/keys/14000.list         # path from port.list

NC=mgcamd mgcamdpass slot0 1

C: 192.168.1.XX 12000 mgcamd mgcamdpass1

F: mgcamd mgcamdpass1 2 0 1 # User CCcam de mgcamd en mismo deco

DVB_API= -1 ###Asi sin # para que funcione mgcamd de visor y ademas sea cliente de  cccam

#!/bin/sh
########################################
###### Powered by The Gemini Team ######
### http://www.i-have-a-dreambox.com ###
########################################
#  camid                           #
#  0000   = Commom Interface   #
#  0001->0099 = for User Experiment#
#  0177   = Rq-Echo-Client     #
#  0178   = RqCS               #
#  0179   = RqCamd             #
#  0189   = OpenCam            #
#  0199   = Dccamd             #
#  0200->0299 = Fbiss              #
#  0300->0399 = Camd3              #
#  0400->0499 = Camx               #
#  0500->0599 = Camx-Radegast-CS   #
#  0600->0699 = Evocamd       -OLD #
#  0700->0799 = Evocamd_ronlad_cs -OLD #
#  0800->0899 = Mgcamd        -OLD #
#  0900->0999 = Mgcamd_ronald_cs  -OLD #
#  1000->1099 = Newcamd       -OLD #
#  1100->1199 = Newcamd-ronald_CS -OLD #
#  1200->1299 = Newcamd-spider-OLD #
#  1300->1399 = Radegast           #
#  1400->1499 = Ronald-CS          #
#  1500->1599 = Scam               #
#  1600->1699 = Scam-Ronald-CS     #
#  1700->1799 = MPCS               #
#  1800->1899 = NewCS              #
#  2000->2099 = Camd3              #
#  2300->2399 = Camd3-NewCS        #
#  2600->2699 = Camd3-MPCardserver #
#  3000->3099 = Evocamd            #
#  3100->3199 = Evocamd-Ronald-CS  #
#  3200->3299 = Evocamd-NewCS      #
#  3300->3399 = Evocamd-MPCardserver   #
#  4000->4099 = Mgcamd             #
#  4100->4199 = Mgcamd-Ronald-CS   #
#  4200->4299 = Mgcamd-NewCS       #
#  4300->4399 = Mgcamd-MPCS        #
#  5000->5099 = Newcamd-Betad      #
#  5100->5199 = Newcamd-Cardserver #
#  5200->5299 = Newcamd-Spider     #
#  5300->5399 = Newcamd-NewCS      #
#  5400->5499 = Newcamd-MPCS       #
#  6000->6099 = CCcam              #
#  6100->6199 = CCcam-Capmtserver  #
#  6200->6299 = CCcam-NewCS        #
#  6300->6399 = CCcam-MPCS         #
#  7000->7099 = Mbox               #
#  7100->7199 = Mbox-NewCS         #
#  9500->9599 = reserved           #
#  9600->9699 = reserved           #
#  9700->9799 = reserved           #
#  9800->9899 = reserved           #
#  9900->9999 = reserved           #
########################################

CAMD_ID=0030
CAMD_NAME="MgCamd/Sbox"
CAMD_BIN=mgcamd_1.35a
CAMD_CS_SRV_BIN=sbox

INFOFILE_A=ecm.info
INFOFILE_B=ecm1.info
INFOFILE_C=ecm2.info
INFOFILE_D=ecm3.info
#Expert window
INFOFILE_LINES=1111111111000000
#Zapp after start
REZAPP=0

########################################

logger $0 $1
echo $0 $1

remove_tmp () {
  rm -rf /tmp/*.info* /tmp/*.tmp*
}

case "$1" in
  start)
  remove_tmp
  /usr/bin/$CAMD_CS_SRV_BIN &
  sleep 15
  /usr/bin/$CAMD_BIN &
  ;;
  stop)
  killall -9 $CAMD_CS_SRV_BIN $CAMD_BIN 2>/dev/null
  sleep 2
  remove_tmp
  ;;
  *)
  $0 stop
  exit 0
  ;;
esac

exit 0

#!/bin/sh

CAMNAME="MgCamd - Sbox"

remove_tmp () {
rm -rf /tmp/*.info* /tmp/*.tmp*
}

case "$1" in
start)
echo "[SCRIPT] $1: $CAMNAME"
remove_tmp
/usr/bin/sbox &
sleep 10
/usr/bin/mgcamd_1.35a &
;;
stop)
echo "[SCRIPT] $1: $CAMNAME"
killall sbox 2>/dev/null
killall mgcamd_1.35a 2>/dev/null          
remove_tmp
;;
*)
$0 stop
exit 0                        
;;
esac

exit 0