Resultados 1 al 3 de 3






VU+ Control Centre by Lee Hudson


Estás en el tema VU+ Control Centre by Lee Hudson dentro del subforo Programas Vu+ en LonasDigital. VU+ Control Centre by Lee Hudson Known Bug: Media Files Manager Transferring MKV files over 2GB causes the Progress Bar to become inaccurate. Don't worry if the progress bar gets to 100% goes blank and the "Please wait file message" still appears. Just leave the app running as it's still transferring the file. Once the file has completed...



Este tema tuvo 1343 Visitas y 2 Respuestas

Actualmente hay 1 usuarios viendo este tema. (0 miembros y 1 visitantes)

  1. #1
    Avatar de Cirus

    Cirus ha iniciado este hilo.
    Cirus está desconectado
    Título:  Usuario Experto Rango:  Usuario Experto
    Fecha de ingreso
    Feb-2009
    Receptor
    VU+ Duo
    Firmware
    BH, OpenPli
    Nacionalidad
    Espana
    Ubicación
    santander
    Edad
    39
    Temas
    147
    Mensajes
    2,680



    VU+ Control Centre by Lee Hudson



    Known Bug:
    Media Files Manager

    Transferring MKV files over 2GB causes the Progress Bar to become inaccurate.
    Don't worry if the progress bar gets to 100% goes blank and the "Please wait file message"
    still appears.
    Just leave the app running as it's still transferring the file. Once the file has completed
    transferring you'll see the filename appear in the Remote or Local file list window respectively.
    It can take a while to complete if your uploading or downloading a very large MKV file.
    --------------------------------------------------------------------------------------------------------------------------------------
    A quick VuCC Video guide is available on Youtube
    _http://www.youtube.com/watch?v=2wvopTTwmhY
    --------------------------------------------------------------------------------------------------------------------------------------

    Installation Instructions
    ------------------------------------
    Unzip all the files and folders in the zip file to your local hard drive.


    How to Use VUCC
    -----------------------------
    1. Run the VUCC.exe application.
    2. Enter the IP address of your Vu+ in the IP Address field, example 192.168.1.5
    3. If you have changed the password on your receiver, enter the password in the password field
    otherwise leave blank.
    4. Click Connect Button


    Telnet
    ---------
    Self explanatory.
    For a list of Busybox commands check out the following website:
    _http://www.busybox.net/downloads/BusyBox.html


    FTP
    ----
    Click the FTP Button.
    This will load FileZilla FTP Client and automatically connect to your Vu+
    For instructions on using FileZilla check out the following website:
    _http://wiki.filezilla-project.org/Using


    Settings Backup
    -------------------------
    Click on Settings Backup Button.
    Click the Backup Settings Button.
    This will backup all the settings from the Vu+ to the /enigma2 and /tuxbox folders on your PC HDD.
    The /enigma2 and /tuxbox folders will be located in the same folder as this program.

    Click the Restore Vu+ Settings Button.
    All your backup data will be restored to the /etc/enigma2 and /etc/tuxbox folders on the Vu+
    Once the files have successfully been restored you'll need to reboot the receiver by powering off
    and on using the switch on the back of the receiver.


    Media Files Manager
    ---------------------------------
    Uploading a Media File.
    Select the Hard Drive and folder that contains your Media File.
    Select the PVR device you have installed from the "Choose PVR Device" drop down window.
    Click on the Local file you want to upload so it's highlighted in blue.
    Click the Upload Button to transfer the file from your local HDD to the Vu+.

    Downloading a Media File.
    Select the Hard Drive and folder that you wish the file to be transferred too.
    Select the PVR device you have installed from the "Choose PVR Device" drop down window.
    Click on the Remote file you want to download so it's highlighted in blue.
    Click the Download Button to transfer the file from the Vu+ to your local HDD.

    Deleting Local File
    Select Local file so it's highlighted in blue.
    Click Delete Local File Button.

    Deleting Remote File
    Select remote file so it's highlighted in blue.
    Click Delete Remote File Button.


    Vu+ HDD Manager
    ------------------------------
    To mount and format a Hard Disk Drive do the following:
    Select the receiver type and Hard Disk type.
    Click the Format Button.

    This will erase all the data on the Vu+ HDD.

    Wait until the format has completed. It can take approx 10-15 minutes for a 1TB HDD.
    You'll see a command prompt like the one below when the format has completed.

    root@bm750>


    Vu+ WebControl
    ---------------------------
    Click the Vu+ WebControl Button to open Vu+ WebControl in your default web browser.


    Kind Regards

    Lee.
    Goldwafers.com

    To keep informed on new developments follow us on Twitter:
    Goldwafers (goldwafers) sur Twitter

    Released 16-9-2010














    Descargar:

    MEGAUPLOAD - The leading online storage and file delivery service









    Citar Citar  




  2. #2
    Avatar de Cirus

    Cirus ha iniciado este hilo.
    Cirus está desconectado
    Título:  Usuario Experto Rango:  Usuario Experto
    Fecha de ingreso
    Feb-2009
    Receptor
    VU+ Duo
    Firmware
    BH, OpenPli
    Nacionalidad
    Espana
    Ubicación
    santander
    Edad
    39
    Temas
    147
    Mensajes
    2,680



    Vu+ Control Centre Version 0.2

    * Fixed Progressbar issue in Media Files Manager.
    * Added Channel List Uploader.
    * Added Auto save login details when application is closed.
    * Added User definable ports for FTP, Telnet, WebPanel.
    * Note: Leave the default ports as they are unless you've altered the default ports on Vu+.


    Descargar:

    MEGAUPLOAD - The leading online storage and file delivery service









    Citar Citar  

  3. #3
    Avatar de Cirus

    Cirus ha iniciado este hilo.
    Cirus está desconectado
    Título:  Usuario Experto Rango:  Usuario Experto
    Fecha de ingreso
    Feb-2009
    Receptor
    VU+ Duo
    Firmware
    BH, OpenPli
    Nacionalidad
    Espana
    Ubicación
    santander
    Edad
    39
    Temas
    147
    Mensajes
    2,680


    VuCC VU+ Control Centre Version 0.3

    VU+ Control Centre Version 0.3 Beta by Lee Hudson - Goldwafers

    Installation Instructions
    -------------------------
    Unzip all the files and folders in the zip file to your local hard drive.


    How to Use VUCC
    --------------------
    1. Run the VUCC.exe application.
    2. Enter the IP address of your Vu+ in the IP Address field, example 192.168.1.5
    If your using a private local IP address enter the IP like this: 010.000.000.001
    3. If you have changed the password on your receiver, enter the password in the password field
    otherwise leave blank.
    4. Click Connect Button


    Version 0.3 Released 11-7-2011

    Added IPK Installer.
    Fixed Telnet paste issue. You can now use CTRL V or Right Mouse Button to paste code from clipboard to Telnet Window






    Descargar:
    MEGAUPLOAD - The leading online storage and file delivery service










    Citar Citar  

Subir