• Hola Invitado, nos gustaría recordarte que mantener este sitio en línea conlleva unos gastos mensuales y anuales.

    Sin vuestra ayuda mensual no es posible seguir en pie, no hay mucho más que contar.

    Si quieres colaborar para que sea posible por lo menos seguir en pie como comunidad, puedes hacerlo mediante alguno de los métodos disponibles en esta página: https://www.lonasdigital.com/donaciones/

    Recuerda que si necesitas invitación para acceder al foro, puedes solicitarla en nuestro Grupo de Telegram


Problemas mbox y clarke tech 2501

1

1976

Amigo de Lonas
Registrado
23 Nov 2010
Mensajes
32
Reacciones
0
Puntos
9
ES QUE ESTE APARAto los unico archivos que tiene son con sssp y claro cuando cambias se ve unos segundos pero se corta enseguida no se si alaguien podria pasarme eun firmware para el 2501 sin sssp o pasarme un mbox que se explisamente para los clarke tech con la funcion sssp ya que el el mbox que y utiliso tiene sssp pero nada gracias
 
Ayuda mbox y clarke tech 2501

pues eso tengo un clarke tech 2501 que solo admite el protocolo sssp tengo el mbox mbox_0.4_BETA_build_0023_4_th_REUPLOAD y en mbox.cf tengo esto

//mbox.cfg EXPLANATION and EXAMPLES

A: { 0 } // for QBoxHD receivers or for any receivers if needed it
//A: { x }
//Choose adapter path
//x=0 -> /dev/dvb/adapter0/
//x=1 -> /dev/dvb/adapter1/
//x=2 -> /dev/dvb/adapter2/
//x=.. -> .......
//default x=0

D: { 0 }
//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//x=4 -> enable Linux DVB API for Kathrein
//x=5 -> enable triple dragon
//x=6 -> enable Qbox HD
//default disabled
B: { 1 }
//B: { x }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//default disabled

Z: { 11 } { 127.0.0.1 8000 }
// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// IP port -> destination IP and UDP port where to send informations
// no default

#C: { 127.0.0.1 7999 }
// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default

U: { 0 }
// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled

L: { 1 }
// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1

#G: { /hdd/ }
//G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
//Remove #, ONLY if you want to use this option !!!!!!!

T: { ./ }
// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }

K: { ./ }
// K option -> where is cwshare.cfg,mbox.prio file
// K: { folder_path_to_files, example: K: { /var/keys/ } }


M: { 1 }
// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0

P: { /tmp/pmt.tmp }

// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for receivers and images that create this file <- use this if you can
// { /tmp/pmtX.tmp } X-> number -> pmt1.tmp ......
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2
W: { 0 }
// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled

Q: { 30 }
//Q option -> newcamd connect retry in sec.
//Q: { x }
// default 300 sec.

F: { 100 }
//F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
//F { x } -> decimal in KBytes
//default 500 KB

///DO NOT USE THIS ,NOT TESTED !!!!!!!!//
//V: { card_type device clock inverse_Reset}
#V: { 3 1 3571200 0 }
#V: { 3 2 3571200 1 }
// card_type:
// Seca 3 , Irdeto 4, Conax 5, Cryptoworks 6, Viaccess 7, NDS 8, Nagravision 9
// device:
// COM1/ttyS0 1
// COM2/ttyS1 2
// /dev/sci0 3
// /dev/sci1 4
// /dev/usb/tts/0 5
// /dev/usb/tts/1 6
// /dev/tts/0 7
// /dev/tts/1 8
// /dev/ttyUSB0 9
// /dev/ttyUSB1 10

//clocks for COM ports in Hz
//for SCI slots use this values
// 1 - 3.33 Mhz
// 2 - 3.63 Mhz
// 3 - 4 Mhz
// 4 - 4.44 Mhz
// 5 - 5Mhz
// 6 - 5.71 Mhz
// 7 - 6.66 Mhz
// 8 - 8 Mhz
//Inverse Reset
// 1 -yes
// 0 -no
///DO NOT USE THIS ,NOT TESTED !!!!!!!!//

J: { 1 }
// J option -> enable adding betacrypt header to N3 ECM for Premier
// J { x }
// x = 0 -> disabled
// x = 1 -> enabled

R: { 700000 }
// only for gboxx, dont work on mbox protocol
// R option -> resend hello to all peers after X seconds, ony for gboxx peers,not mbox peers
//default in code 3600 seconds

H: { 1 1 1 1 1 1 }
// only for gboxx, dont work on mbox protocol
// H option -> mapping provid (0-disabled, 1-enabled)
//H: { a b c d e f }
//a-> mapping all 0BXX to 0B00
//b-> mapping 1810 to 1801
//c-> mapping 1803 to 1801
//d-> mapping 1802 to 1801
//e-> mapping 1815 to 1801
//f-> mapping 1822 to 1801


S: { COM1 }
//S option -> enable sssp protocol
//S: { COM1 }
//x=COM1
//x=COM2
//x=/dev/ttyS0
//x=/dev/ttyS1
el problema es que se abre el canal y solo dura unos segundos no se si hay un mbox mejor para este aparato y si alguien me lo puede pasar y una ultima pregunta el aparato tiene un usb para cargar los firmware no se si con un cable de usb a usb que tenga un disco con drivers para usarlo como puerto com me solucionaria el probrema y si serviria espero la ayuda de algun experto muchas gracias a todos los compañeros del foro
 
Para añadir cosas, añadelas en tu mismo post, te lo he combinado.
 

Temas similares

O
Respuestas
2
Visitas
852
llamp-tv
llamp-tv
F
Respuestas
9
Visitas
3K
FJGONZALEZ74
F
E
Respuestas
17
Visitas
3K
illohacker
I
orujillo
Respuestas
3
Visitas
1K
celebrityky
celebrityky
J
Respuestas
11
Visitas
4K
jdobla
J
Atrás
Arriba