• Hola Invitado, nos gustaría recordarte que mantener este sitio en línea conlleva unos gastos mensuales y anuales.

    Sin vuestra ayuda mensual no es posible seguir en pie, no hay mucho más que contar.

    Si quieres colaborar para que sea posible por lo menos seguir en pie como comunidad, puedes hacerlo mediante alguno de los métodos disponibles en esta página: https://www.lonasdigital.com/donaciones/

    Recuerda que si necesitas invitación para acceder al foro, puedes solicitarla en nuestro Grupo de Telegram


Primeras pruebas con sbox lector gris gm990 ko.

††LUCIFER††

Pues realizadas primeras pruebas con sbox.sh40 para que ademas de poder ser cliente newcamd (que funciona perfectamente), podamos leer nuestra tarjeta gris.

En las pruebas realizadas, pues se inicia bien la emu, reconoce atr y demas, y reconoce la tarjeta pero luego no reconoce serial de la card la pone a 00000000 y se queda en la lectura de las pmt no llegando a dar visionado.

Seguiremos probando.
 
Si yo tambien estoy en ello se la he metido a mano y estoy mirando si meter otro sbox para ver que pasa.

Te dejo mi confi

Código:
[main]
server_only=0                # 0=mixed mode 1=only server
log=0                    # 1=no log 1=log to /tmp/sbox.log    //ALWAYS USE 0//
logudp=tu.ip.dyndns.com:3354            # server ip:server port
userspath=/var/key/users.sbox        # users list
channelinfo=/var/key/sbox.channelinfo    # channel info
webinterface=1                # 1=web interface on 0=web interface off
webadmin=GM990:GM990            # user:pass for webinterface
webport=8181                # web interface port
rdgserver=0                # 0=radegast server off 1=radegast server on
rdgport=16050                # radegast server port
use_nagra=0                # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)
prio=0100:4106        # prio caid for dvbapi, caid1:prov1;caid2:prov2:prov1
cccam=0:18000                # 0=cccam server off - 1=cccam server on : cccam server port
betatunnel=1                # 0=betatunnel support disabled 1=betatunnel support enabled

[slot0]
active=1                # 0=inactive 1=active
sci=/dev/sci0            # lower
ncdserver=0                # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314    # newcamd deskey
port=15050                # newcamd port
mhz=357                    # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368 
reader=1                # 0=phoenix, 1=sci (internal reader), 2=smartreader
cache=0                    # how many ecms can be cached, 0 or less=cache disabled

# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!

#Nagra2/3 Example
#[CCCCCCCC]                # nagra2 camid (4 bytes)
#rsa=                    # rsa "n" from this card (like newcs)
#boxkey=                # boxkey from this card
#emm=0                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0                # use portlist or no
#portlistpath=/var/keys/port.list    # path from port.list

#Nagra tiger/ncmed Example
#[CCCCCCCC]                # nagra camid (4 bytes)
#emm=2                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0                # use portlist or no
#portlistpath=            # path from port.list

#Seca Example
[4FEVVCV]                # seca camid (4 bytes) Ficticia :)
ok_view=1                # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=0                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0                # use portlist or no
portlistpath=            # path from port.list

#Viaccess Example
#[CCCCCCCC]                # via camid (4 bytes)
#emm=7                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0                # use portlist or no
p#ortlistpath=                # path from port.list
#aeskey=                    # aeskey used by nano d2

#Irdeto Example
#[CCCCCCCC]                # irdeto camid (4 bytes)
#camkey=0000000000000000            # CamKEY
#camkeydata=00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
#emm=7                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0                # use portlist or no
#portlistpath=                # path from port.list

#NDS Example
#[CCCCCCCC]                # nds camid (4 bytes)
#emm=7                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0                # use portlist or no
#portlistpath=                # path from port.list
#boxid=                    # if sbox can't get boxid from card, add here manually

#Conax Example
#[CCCCCCCC]                # conax camid (4 bytes)
#emm=7                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0                # use portlist or no
#portlistpath=                # path from port.list
 
Si yo tambien estoy en ello se la he metido a mano y estoy mirando si meter otro sbox para ver que pasa.

Te dejo mi confi

Código:
[main]
server_only=0                # 0=mixed mode 1=only server
log=0                    # 1=no log 1=log to /tmp/sbox.log    //ALWAYS USE 0//
logudp=tu.ip.dyndns.com:3354            # server ip:server port
userspath=/var/key/users.sbox        # users list
channelinfo=/var/key/sbox.channelinfo    # channel info
webinterface=1                # 1=web interface on 0=web interface off
webadmin=GM990:GM990            # user:pass for webinterface
webport=8181                # web interface port
rdgserver=0                # 0=radegast server off 1=radegast server on
rdgport=16050                # radegast server port
use_nagra=0                # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)
prio=0100:4106        # prio caid for dvbapi, caid1:prov1;caid2:prov2:prov1
cccam=0:18000                # 0=cccam server off - 1=cccam server on : cccam server port
betatunnel=1                # 0=betatunnel support disabled 1=betatunnel support enabled

[slot0]
active=1                # 0=inactive 1=active
sci=/dev/sci0            # lower
ncdserver=0                # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314    # newcamd deskey
port=15050                # newcamd port
mhz=357                    # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368 
reader=1                # 0=phoenix, 1=sci (internal reader), 2=smartreader
cache=0                    # how many ecms can be cached, 0 or less=cache disabled

# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!

#Nagra2/3 Example
#[CCCCCCCC]                # nagra2 camid (4 bytes)
#rsa=                    # rsa "n" from this card (like newcs)
#boxkey=                # boxkey from this card
#emm=0                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0                # use portlist or no
#portlistpath=/var/keys/port.list    # path from port.list

#Nagra tiger/ncmed Example
#[CCCCCCCC]                # nagra camid (4 bytes)
#emm=2                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0                # use portlist or no
#portlistpath=            # path from port.list

#Seca Example
[4FEVVCV]                # seca camid (4 bytes) Ficticia :)
ok_view=1                # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=0                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0                # use portlist or no
portlistpath=            # path from port.list

#Viaccess Example
#[CCCCCCCC]                # via camid (4 bytes)
#emm=7                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0                # use portlist or no
p#ortlistpath=                # path from port.list
#aeskey=                    # aeskey used by nano d2

#Irdeto Example
#[CCCCCCCC]                # irdeto camid (4 bytes)
#camkey=0000000000000000            # CamKEY
#camkeydata=00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
#emm=7                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0                # use portlist or no
#portlistpath=                # path from port.list

#NDS Example
#[CCCCCCCC]                # nds camid (4 bytes)
#emm=7                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0                # use portlist or no
#portlistpath=                # path from port.list
#boxid=                    # if sbox can't get boxid from card, add here manually

#Conax Example
#[CCCCCCCC]                # conax camid (4 bytes)
#emm=7                    # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0                # use portlist or no
#portlistpath=                # path from port.list

Mi log

Código:
GM990HD:/var/emu# ./sbox
13:29:49 sbox: Viewing Pay TV without a valid subscription is illegal
13:29:49
13:29:49 Wellcome to SBox (for SH40)
13:29:49 Version: 0.0.5-1 #3 (4/08/2011)
13:29:49 WebPage: http://www.sboxobs.tk
13:29:49
13:29:49 sbox: checking for /usr/bin/sbox.conf... OK
GM990HD:/var/emu# 13:29:49 io: sci device detected
13:29:52 reset: got atr on slot0
13:29:52 reset: atr  3BF711000140967070xxxxxxxxxxxxxx
13:29:52 reset: hist                   0A0E6CBxxxxxxxxxxxx
13:29:52 reset: char
  l
13:29:52 reset: working at 3.570Mhz (max 5.000Mhz)
13:29:52 sbox: seca card init
13:29:54 seca: serial 00000000 (0)
13:29:56 seca: card init ok
13:29:56
13:29:56 sbox: cannot open channelinfo file, ignoring
13:29:56 sbox: my online id is: EFD5306Dxxxxxxxxxxxx
13:29:56 sbox: entering main loop
13:29:56 sbox: mixed mode
13:29:56 webif: server started on port 8181, user=GM990, pass=GM990
13:30:00 stream 0: re-reading pmt.tmp (sid 0x778E)
13:30:00 stream 0: ecmpid 0x048E, caid 0x0100, prov 0x004106, system Seca
13:30:00 stream 0: ecmpid 0x0876, caid 0x1810, prov 0x000000, system NagraVision
13:30:00 stream 0: emmpid 0x00C1, caid 0x0100, prov 0x000000, system Seca
13:30:00 stream 0: emmpid 0x00C4, caid 0x0100, prov 0x004106, system Seca
 
Si asi tenia la configuracion cuando he estado probando, he ido subiendo mhz pero tampoco he logrado la lectura correcta de la card...
El caso es que con la misma configuracion en qboxhd que tenia pues la gris perfecta con el sbox.sh40.

He probado solamente dos versiones la ultima y una 0.4 pero ambas no me reconoce bien el serial y se queda bloqueado en la lectura de las pmt.

si veo k lo mismo serial 00000 y se te queda en las pmt.

imagino que tampoco te dara visionado
 
Última edición:
Si eso mismo estoy viendo yo lo de subir los Mhz tambien lo he visto voy a ver los logs que tira y a las malas se lo reportamos a EDK para que si puede que lo mire.
 
buen trabajo señores
 
De seguro, abra k reportarlo a EDK ,

Saludosss!!!
 
se logró solucionar?
 
Atrás
Arriba