sbox no actualiza targeta

hola tengo el vu con sbox y cccam pero no me actualiza la blanca , me podeis decir porque el sbox no me lo actualiza
saludos

Pon aquí como tienes la config de el sbox.conf

ain]
server_only=0 # 0=emu+newcamd server 1=only newcamd server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
logudp=xxx.0.0.x:3354 # server ip:server port
userspath=/var/bin/users.sbox # users list
webinterface=1 # 1=web interface on 0=web interface off
webadmin=xxxxxxxxxxxxxxx # userass for webinterface
webport=4xxx # web interface port
rdgserver=0 # 0=radegast server off 1=radegast server on
rdgport=xxxx # radegast server port
use_nagra=1 # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=4030 # newcamd port
mhz=368 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader
cache=0 # how many ecms can be cached, 0 or less=cache disabled
[slot1]
active=1 # 0=inactive 1=active
sci=/dev/sci1 # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=4031 # newcamd port
mhz=368 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader
cache=0 # how many ecms can be cached, 0 or less=cache disabled
# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!
#Seca Example
[12AB47BF] # seca camid (4 bytes)
ok_view=1 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
#portlistpath=/var/bin/port.list # path from port.list
#Nagra2/3 Example
[xxxxxxx] # nagra2 camid (4 bytes)
rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
boxkey=0xxxxxxxxxx # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
#portlistpath=/var/keys/port.list # path from port.list
saludos

Yo lo veo todo bien, pero cambiaría un par de cosas.. en cache=0 pondría 20 en vez de 0 y en mhz pondría 318 por ser una blanca que va mucho mejor, por lo demás no le veo nada extraño, mas o menos lo tengo así con mi blanca en sbox+ mbox.

Saludos