Resultados 1 al 1 de 1






visionar card gris con emu gbox.net


Estás en el tema visionar card gris con emu gbox.net dentro del subforo Gbox en LonasDigital. Pues para visionar nuestra card gris con las ultimas versiones de gbox.net, en receptor enigma2, pues archivo configuracion de gbox(gbox_cfg) tal cual lo pongo: # gbox config file # Trace, Debug # xx yz ; xx=00 no konsole output...



Este tema tuvo 1114 Visitas y 0 Respuestas

Actualmente hay 1 usuarios viendo este tema. (0 miembros y 1 visitantes)

  1. #1
    Avatar de ††LUCIFER††

    ††LUCIFER†† ha iniciado este hilo.
    ††LUCIFER††


    Pues para visionar nuestra card gris con las ultimas versiones de gbox.net, en receptor enigma2, pues archivo configuracion de gbox(gbox_cfg) tal cual lo pongo:




    Código:
    # gbox config file
    
    
    # Trace, Debug
    # xx yz ; xx=00 no konsole output
    # xx yz ; xx=01 konsole output
    # xx yz ; y=0 debug output (dont use)
    # xx yz ; y=1 no debug output
    # xx yz ; z=0 ouput to konsole
    # xx yz ; z=1 output to /var/tmp/debug.txt
    # xx yz ; z=2 Output to UDP (to capture with gboxt)
    Z: { 01 10 } 192.168.1.2 8024
    
    
    # gbox working mode
    # 00 pure Emu
    # 01 pure SoftCam (when card inside), Emu (when no card inside)
    # 02 pure Net Client
    # 03 Mixed mode !!!!! always use this !!!!!
    G: { 03 }
    
    
    # Display ECM messages on Konsole
    # 00 dont show any ECMs
    # 01 show only valid ECMs
    # 02 show valid and bad ECMs with complete data display
    # 1X show ca access
    # 2X use nagra aladin 1801 in betacrypt mode (for UM-I02)
    C: { 02 }
    
    
    # Display EMM messages on Konsole
    # 00 dont show any EMMs
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    # 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
    M: { 12 }
    
    
    # Auto Update
    # 00 is ignored (default)
    # 01 enable AU
    # 02 Auto AU !!!!! always use this !!!!!
    A: { 01 }
    
    
    # Key Update
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    U: { 01 }
    
    
    # Hash pids
    # 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
    # 01 hash only pids with implemented algos and available keys !!!!! always use this
    H: { 01 }
    
    
    # Key files folder
    # 00 keyfiles in /var/keys
    # 01 keyfiles in /var/tmp
    T: { 00 }
    
    
    # On Screen Display for the Multysystemcam on com1/com2
    # 00 No OSD (default)
    # 01 display Smartcard messages in Neutrino
    # 02 display Smartcard messages in Neutrino new nhttpd format
    # 03 display Smartcard messages in Enigma
    # 04 display Smartcard messages in Enigma2
    O: { 00 } 192.168.0.3 coolstream
    
    
    # Logger and NET-mode UDP port Init
    # 00 do not init UDP port
    # 01 Init UDP port for IP, port, UDP
    L: { 01 } 192.168.0.251 7025
    
    
    # demux, multicam/comport configuration
    # example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
    # *x ** ; x = device nummber to be used (0= default)
    # D* ** ; force use of /proc/bus/gtx for cw write operations
    (in the dbox2 the gbox writes directly the CWs, 00 is the
    recommended mode ! No drivers are required) use D* ** ONLY if
    you have Problems. 0* ** should be prefered !!!
    # F* ** ; write CWs in both devices (used for PVR in STB04xxx devices)
    # ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
    # ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
    # ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
    # ** *z ; z=0001b (0x*1) use com1 as Multicam
    # ** *z ; z=0010b (0x*2) use com2 as Multicam
    # ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
    # ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
    # ** *z ; z=0100b (0x*4) invert CTS detection on com1
    # ** *z ; z=1000b (0x*8) invert CTS detection on com2
    V: { 00 10 }
    
    
    # RS232 SSSP mode
    # x debug messages, 1=on, 0=off
    # y com port to use (0=none, 1=com1, 2=com2)
    R: { 00 }
    
    
    # Task type
    # 00 ** normal mode gbox mode (no season, use Multicam instead)
    # 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
    # 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
    # 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
    # 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
    # 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
    # ** *1 Com port to use for season emulatiom (1 or 2)
    # ** 0* Use CTS for RST detection
    # ** 1* Use DCD for RST detection
    # ** ** 9600 = Baudrate to be used (working only on dbox2)
    W: { 00 00 } 9600
    
    
    # =============================================================================
    # extra options to override default seting in case you expirience Problems,
    # normaly these setings are not required.
    
    
    # GboxTwin mode
    # this options for the 2nd gbox ONLY
    # you must have an extra gbox, gbox_cfg and cwshare.cfg running on /tmp,
    # all other files can linked to the org. files
    #F: { A6 } 5
    
    
    # cpu, api, cw write method
    # 00 auto
    # 01 80X86
    # 02 MPC823
    # 03 IBM STB04xxx
    # 00 auto
    # 01 ibm
    # 02 api2
    # 03 api3
    # 00 cw write style = use internal routine (only dbox2)
    # 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
    # 02 cw write style = CA_SET_DESCR type2
    # 03 cw write style = CA_SET_DESCR type3
    # 04 cw write style = 16 byte /proc/bus/gtx
    # 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0
    # xx write cw in 1st device with index=xx
    # yy write cw in 2nd device with index=yy
    # 01 means with .index=0 (default)
    # 02 means with .index=1
    # 03 means with .index=0 and .index=1
    # .. any bitwise combination ...
    # FF means with all 8 indexes (0-7)
    #J: { 00 03 01 00 00 }
    
    
    # Files, folders, devices
    # folder/device comment
    #F: { 01 } /var/tmp/pmt.gbx // pmt file
    #F: { 02 } /var/tmp/emm.info // key update log file
    #F: { 03 } /var/tmp/ecm.info // ecm info file
    #F: { 04 } /var/tmp/atack.txt // atack info file
    F: { 08 } 1 // pmt mode (0 - pmt file mode, 1 - pmt socket mode)
    #F: { 11 } /var/keys // folder for config files
    #F: { 12 } /var/tmp // folder for temporary file
    #F: { 13 } /var/tmp // folder for keyfiles
    #F: { 21 } /dev/null // ca device
    #F: { 22 } /dev/null // dvr device
    #F: { 23 } /dev/null // demux device
    #F: { 31 } /dev/null // second ca device to write cw's (recording)
    #F: { 41 } /dev/sci0 // STB04xxx slot1
    #F: { 42 } /dev/sci1 // STB04xxx slot1
    #F: { 43 } /dev/tts/0 // rs232 com1
    #F: { 44 } /dev/tts/1 // rs232 com2
    
    
    # For overclocking freaks, Clocking internal STB04xxx slots with:
    # 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
    # Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
    # The Dream has not a clean clock signal, some cards that are sensitive will
    # refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
    # On other STB04xxx recievers the same cards work with 6.30MHz
    #F: { 51 } 02 // irdeto
    #F: { 52 } 03 // seca
    #F: { 53 } 03 // viaccess
    #F: { 54 } 03 // nagra
    #F: { 55 } 03 // crypto
    #F: { 57 } 03 // conax
    #F: { 58 } 03 // nds
    
    
    # force a name change of the season or sssp rs232 device
    #F: { 45 } /dev/ttyS1
    
    
    # set stay alive ping time in seconds (default is 300)
    #F: { A0 } 300
    
    
    # disable direct serial port I/O access on 80x86cpus (win and linux)
    # direct port i/o is used to set unusual Baudrates, if you want to
    # a 3.579MHz card in a 6.000MHz reader etc ...
    #
    # Enabled (A1=0) is the default setting, has always been !!!
    #
    # Disable (set to 1) it ONLY if you have problems with ioperm or you want
    # to use a usb-to-rs232 smartcard reader
    F: { A1 } 1

    Teniendo sobre todo en cuenta:


    F: { 08 } 1// pmt mode (0 - pmt file mode, 1 - pmt socket mode)


    Ponerlo a 1 ya que los receptores enigma 2 normalmente utilizan camd.socket ubicado en /tmp


    Iniciamos gbox y observamos en el log que todo perfecto:




    Código:
    dhcppc0:~# cd /var/emu
    dhcppc0:/var/emu# ./gbox
    starting now
    
    
    gbox.net 2.2A/Linux@SH4 ( Feb 7 2012, 13:12:18 ) git804
    Checking/Logging PW tiers on every EMM
    OSD (dbox2) IP = 192.168.0.3
    Logger init for IP: 192.168.000.251 on port 7025
    RS232gate=0 speed=9600
    Seasonport=0 speed=9600 mode=0
    direct serial port i/o disabled
    mode 03
    AU:01/update:01/Keyfile:00 Hash:01 DispECM:02/EMM:02 UDPInit:01 OSD:00
    could not open /var/keys/irdeto
    could not open /var/keys/seca
    could not open /var/keys/via
    could not open /var/keys/nagra
    could not open /var/keys/conax
    could not open /var/keys/crypto
    could not open /var/keys/nds
    could not open /var/keys/constcw
    Total 0 ports to monitor
    CPU SH4
    using LinuxTV api3
    could not open /var/keys/softcam.cfg
    internal slot1 opened
    mode: any pid
    have to init card 1
    ATR : xxxxxxxxxxxxxxxxxxxxxxxxxxxx
    Reset Baudrate = 9600 Baud
    Init Seca
    UA: SN:000000xxxxxxxxxxxxxxxxxxxx
    DIGITAL+ 5001 ppua xxxxxxxxxxxxxx 04.11.2012 PBM FFFFFFFFFFFFFF
    DIGITAL+ 4106 ppua xxxxxxxxxxxxxx 04.11.2012 PBM 00200000C02000
    SPARE 4108 ppua xxxxxxxxxxxxxx 04.11.2012 PBM 00000000000000
    Working Baudrate = 13440 Baud
    cardsystem= 2
    card init ok
    entering main loop
    ReRead pmt.tmp
    PMT: 
    9F 80 32 81 99 03 77 C3 1D 00 19 01 81 08 00 C0 
    00 00 04 0A 00 01 82 02 01 00 84 02 04 0F 85 04 
    00 00 00 01 02 00 A5 00 1A 01 09 04 18 10 E8 83 
    09 11 01 00 E4 9B 41 06 FF FF FF FF FF FF FF FF 
    FF 2D 1E 04 00 64 00 1A 01 09 04 18 10 E8 83 09 
    11 01 00 E4 9B 41 06 FF FF FF FF FF FF FF FF FF 
    2D 1E C0 00 D0 00 00 C0 00 DE 00 00 C1 01 88 00 
    00 C1 00 D5 00 00 C1 00 FD 00 00 C1 01 33 00 00 
    C1 01 6B 00 00 C1 01 6C 00 00 C1 01 64 00 00 C0 
    01 35 00 00 C1 03 78 00 00 C1 02 70 00 00 
    ReRead pmt.tmp
    ECM: CA ID: 0x1810 Nagravision -> CA PID: 0x0883
    *ECM: CA ID: 0x0100 Seca/Mediaguard (4106) -> CA PID: 0x049B
    **** hashTableECM 1 elements ****
    **** hashTableEMM 0 elements ****
    already selected card 1
    ===== Seca ECM on CaID 0x0100, pid 0x049B =====
    prov: 0006 ( on card prov.nr. 1 ), pkey: 0E
    -ECM-------------------------------------------
    80 00 61 41 06 00 00 0E 00 EA 79 D6 FF DE F3 94 
    EB 36 CC 73 2E 40 DB 1F 7B A3 73 8C E5 56 BE F0 
    7A C3 60 DA CD 69 EB 94 01 AD 03 6B E7 75 D1 10 
    A6 A5 AA A7 85 5A B2 1F 9B D8 2D F8 45 C2 71 58 
    BD C9 F3 FB A2 34 9E 99 CD 52 AE 71 2B 3F 33 45 
    A2 3C E6 20 BE 41 C2 BE A2 A0 67 24 12 86 C9 9E 
    B8 E8 86 53 
    -Send to card----------------------------------
    C1 3C 01 0E 5C 00 EA 79 D6 FF DE F3 94 EB 36 CC 
    73 2E 40 DB 1F 7B A3 73 8C E5 56 BE F0 7A C3 60 
    DA CD 69 EB 94 01 AD 03 6B E7 75 D1 10 A6 A5 AA 
    A7 85 5A B2 1F 9B D8 2D F8 45 C2 71 58 BD C9 F3 
    FB A2 34 9E 99 CD 52 AE 71 2B 3F 33 45 A2 3C E6 
    20 BE 41 C2 BE A2 A0 67 24 12 86 C9 9E B8 E8 86 
    53 
    CAT: 
    01 B0 74 FF FF C9 00 00 09 09 01 00 E0 C1 01 E0 
    C4 41 06 09 04 18 10 E0 9B 09 04 18 70 E7 DF 09 
    04 18 71 E7 E0 09 04 18 72 E7 E1 09 04 18 73 E7 
    E2 09 04 18 74 E7 E3 09 04 18 75 E7 E4 09 04 18 
    76 E7 E5 09 04 18 77 E7 E6 09 04 18 78 E7 E7 09 
    04 18 79 E7 E8 09 04 18 7A E7 E9 09 04 18 7B E7 
    EA 09 04 18 7C E7 EB 09 04 18 7D E7 EC 09 04 18 
    7E E7 ED B4 CE E3 71 
    Card response (C1 3C): 90 00 
    -Send to card----------------------------------
    C1 3A 00 00 10 
    card 1 response in 514 ms
    Card response (C1 3A): 
    38 8B 56 19 53 B7 8C 96 28 FF FE 25 68 1A 33 B5 
    90 00 
    CW0: 38 8B 56 19 53 B7 8C 96 
    CW1: 28 FF FE 25 68 1A 33 B5 
    ===============================================
    ReRead softcam.cfg
    could not open /var/keys/softcam.cfg
    ECM: CA ID: 0x1810 Nagravision -> CA PID: 0x0883
    *ECM: CA ID: 0x0100 Seca/Mediaguard (4106) -> CA PID: 0x049B
    *EMM: CA ID: 0x0100 Seca/Mediaguard (0000) -> CA PID: 0x00C1
    *EMM: CA ID: 0x0100 Seca/Mediaguard (4106) -> CA PID: 0x00C4
    EMM: CA ID: 0x1810 Nagravision -> CA PID: 0x009B
    EMM: CA ID: 0x1870 Nagravision -> CA PID: 0x07DF
    EMM: CA ID: 0x1871 Nagravision -> CA PID: 0x07E0
    EMM: CA ID: 0x1872 Nagravision -> CA PID: 0x07E1
    EMM: CA ID: 0x1873 Nagravision -> CA PID: 0x07E2
    EMM: CA ID: 0x1874 Nagravision -> CA PID: 0x07E3
    EMM: CA ID: 0x1875 Nagravision -> CA PID: 0x07E4
    EMM: CA ID: 0x1876 Nagravision -> CA PID: 0x07E5
    EMM: CA ID: 0x1877 Nagravision -> CA PID: 0x07E6
    EMM: CA ID: 0x1878 Nagravision -> CA PID: 0x07E7
    EMM: CA ID: 0x1879 Nagravision -> CA PID: 0x07E8
    EMM: CA ID: 0x187A Nagravision -> CA PID: 0x07E9
    EMM: CA ID: 0x187B Nagravision -> CA PID: 0x07EA
    EMM: CA ID: 0x187C Nagravision -> CA PID: 0x07EB
    EMM: CA ID: 0x187D Nagravision -> CA PID: 0x07EC
    EMM: CA ID: 0x187E Nagravision -> CA PID: 0x07ED
    **** hashTableECM 1 elements ****
    **** hashTableEMM 2 elements ****
    detected EMM data on caid 0100 pid 00C1 - Seca/Mediaguard (Canal+)
    already selected card 1
    ===== Seca ECM on CaID 0x0100, pid 0x049B =====
    prov: 0006 ( on card prov.nr. 1 ), pkey: 0E
    -ECM-------------------------------------------
    81 00 61 41 06 00 00 0E 00 35 5A 0E 0A 58 EF F9 
    EB 4A 3D 7A 22 FB 4B 33 4A 18 86 DB AF 92 52 D7 
    BE 02 B0 41 00 E5 4E 3F 9C 01 90 C2 70 7B 14 02 
    F3 80 67 6D C7 88 48 87 41 3C CE 8F 20 48 0B EA 
    DD DC 5C 61 4F FE F9 D9 7E 58 89 37 0D 8A DE 25 
    C5 B6 42 ED 9B FA 81 2F FB 69 44 02 DF 03 38 06 
    A8 D4 2A 59 
    -Send to card----------------------------------
    C1 3C 01 0E 5C 00 35 5A 0E 0A 58 EF F9 EB 4A 3D 
    7A 22 FB 4B 33 4A 18 86 DB AF 92 52 D7 BE 02 B0 
    41 00 E5 4E 3F 9C 01 90 C2 70 7B 14 02 F3 80 67 
    6D C7 88 48 87 41 3C CE 8F 20 48 0B EA DD DC 5C 
    61 4F FE F9 D9 7E 58 89 37 0D 8A DE 25 C5 B6 42 
    ED 9B FA 81 2F FB 69 44 02 DF 03 38 06 A8 D4 2A 
    59 
    Card response (C1 3C): 90 00 
    -Send to card----------------------------------
    C1 3A 00 00 10 
    card 1 response in 510 ms
    Card response (C1 3A): 
    38 8B 56 19 53 B7 8C 96 AA 48 71 63 B3 31 C1 A5 
    90 00 
    CW0: 38 8B 56 19 53 B7 8C 96 
    CW1: AA 48 71 63 B3 31 C1 A5 
    ===============================================




    Citar Citar  

  2. Los siguientes 2 Usuarios dieron las gracias a ††LUCIFER†† Por su Mensaje :

    chirimbo (07-11-12), tiomoro (07-11-12)




Subir