Resultados 1 al 5 de 5






Copia de mbox.cfg Lonas 1.5


Estás en el tema Copia de mbox.cfg Lonas 1.5 dentro del subforo Scripts & tools en LonasDigital. Buenas amigos del foro, he tenido un problema a la hora de editar el mbox.cfg y necesitaria que alguna alma caritativa me subiese o me pusiera un copia-pega del original de dicho fichero si es posible. Saludos y enhorabuena por el foro....



Este tema tuvo 1583 Visitas y 4 Respuestas

Actualmente hay 1 usuarios viendo este tema. (0 miembros y 1 visitantes)

  1. #1
    Avatar de sebas1980

    sebas1980 ha iniciado este hilo.
    sebas1980 está desconectado
    Título:  Amigo de Lonas Rango:  Amigo de Lonas
    Fecha de ingreso
    Oct-2012
    Nacionalidad
    Espana
    Temas
    14
    Mensajes
    69


    Buenas amigos del foro, he tenido un problema a la hora de editar el mbox.cfg y necesitaria que alguna alma caritativa me subiese o me pusiera un copia-pega del original de dicho fichero si es posible.
    Saludos y enhorabuena por el foro.



    Citar Citar  




  2. #2
    Avatar de segurasharing1

    segurasharing1 está desconectado
    Título:  Usuario VIP Rango:  Usuario VIP
    Fecha de ingreso
    Aug-2012
    Receptor
    giga 800 ue
    Firmware
    open LD 1.8
    Nacionalidad
    Espana
    Ubicación
    JAEN
    Temas
    28
    Mensajes
    321


    sebas yo lo tengo a si por si te sirve yo solo pongo la z la direccion ip del pc

    //mbox.cfg EXPLANATION and EXAMPLES
     
    A:
    { 0 }// for QBoxHD receivers or for any receivers if needed it
    //A: { x }
    //Choose adapter path
    //x=0 -> /dev/dvb/adapter0/
    //x=1 -> /dev/dvb/adapter1/
    //x=2 -> /dev/dvb/adapter2/
    //x=.. -> .......
    //default x=0
     
    D:
    { 0 }
    //D: { x }
    //x=0 -> disable
    //x=1 -> enable dbox2 cw writing
    //x=2 -> enable STAPI for IPBOX
    //x=3 -> enable STAPI for Kathrein
    //x=4 -> enable Linux DVB API for Kathrein
    //x=5 -> enable triple dragon
    //x=6 -> enable Qbox HD
    //default disabled
    B:
    { 0 }
    //B: { x }
    //x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
    //x=1 -> enable
    //default disabled
     
    Z:
    { 11 }{ 192.168.1.xxx 8000 }#IP DE TU PC
    // Z option -> control sending/writing current informations
    // Z: { xy } { IP port }
    // x=0 -> don't print time stamp (in console screen and in debug file)
    // x=1 -> print time stamp ( .... )
    // y=0 -> no writing/sending informations to debug file/destination IP
    // y=1 -> send informations to destination IP but not in debug file
    // y=2 -> write informations to debug file but don't send to destination IP
    // y=3 -> write/send informations to debug file/destination IP
    // IP port -> destination IP and UDP port where to send informations
    // no default
     
    #C: { 127.0.0.1 7999 }
    // C option -> control receiving some command messages localy or from another IP
    // C: { IP port }
    // IP-> your local IP or you DNS
    // port -> on what port you will be waiting command messages
    // no default
     
    U:
    { 0 }
    // U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
    // default only on hello message peer(s) IP are updated !!!
    // U: { x }
    // x=0 -> disabled
    // x=1 -> enabled
    // default disabled
     
    L:
    { 1 }
    // L option -> how mbox to menage virtual card(s) with level 0
    // ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
    // L: { x }
    // x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
    // x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
    // default 1
     
    #G: { /hdd/ }
    //G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
    //Remove #, ONLY if you want to use this option !!!!!!!
     
    T:
    { /tmp/ }
    // T option -> where to store temp files ... (share.info,debug.txt ,etc.)
    // T: { folder_path_to_files, example: T: { /tmp/ } }
    K:
    { /usr/keys/ }
    // K option -> where is cwshare.cfg,mbox.prio file
    // K: { folder_path_to_files, example: K: { /var/keys/ } }
     
    M:
    { 1 }
    // M option -> Mode option
    // M: { x }
    // x=0 -> local mode no NET
    // x=1 -> NET mode
    // default 0
     
    P:
    { 2/tmp/camd.socket }
     
    // P option -> PMT location (Dont used with linux and windows)
    // you must be tuned to channel so image can generate this file
    // { /tmp/pmt.tmp } for receivers and images that create this file <- use this if you can
    // { /tmp/pmtX.tmp } X-> number -> pmt1.tmp ......
    // { 1/tmp/camd.socket } for enigma 1
    // { 2/tmp/camd.socket } for enigma 2
    W:
    { 0 }
    // W option -> write raw ECM to ecm.raw file
    // W: { x }
    // x=0 -> disabled
    // x=1 -> enabled
    // default disabled
     
    Q:
    { 15 }
    //Q option -> newcamd connect retry in sec.
    //Q: { x }
    // default 300 sec.
     
    F:
    { 100 }
    //F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
    //F { x } -> decimal in KBytes
    //default 500 KB
     
    J:
    { 1 }
    // J option -> enable adding betacrypt header to N3 ECM for Premier
    // J { x }
    // x = 0 -> disabled
    // x = 1 -> enabled
     
    R:
    { 700000 }
    // only for gboxx, dont work on mbox protocol
    // R option -> resend hello to all peers after X seconds, ony for gboxx peers,not mbox peers
    //default in code 3600 seconds
     
     
    H:
    { 1 1 1 1 1 1 }
    // only for gboxx, dont work on mbox protocol
    // H option -> mapping provid (0-disabled, 1-enabled)
    //H: { a b c d e f }
    //a-> mapping all 0BXX to 0B00
    //b-> mapping 1810 to 1801
    //c-> mapping 1803 to 1801
    //d-> mapping 1802 to 1801
    //e-> mapping 1815 to 1801
    //f-> mapping 1822 to 1801


    Citar Citar  

  3. #3
    Avatar de sebas1980

    sebas1980 ha iniciado este hilo.
    sebas1980 está desconectado
    Título:  Amigo de Lonas Rango:  Amigo de Lonas
    Fecha de ingreso
    Oct-2012
    Nacionalidad
    Espana
    Temas
    14
    Mensajes
    69


    Gracias amigo, pero una preguntilla, ¿en la z la dirección del pc o la del deco?, en algunos foros pone el pc y otros el deco.
    En el mbox de mi dm500s pone ip del deco.
    Saludos.


    Citar Citar  

  4. #4
    Avatar de sebas1980

    sebas1980 ha iniciado este hilo.
    sebas1980 está desconectado
    Título:  Amigo de Lonas Rango:  Amigo de Lonas
    Fecha de ingreso
    Oct-2012
    Nacionalidad
    Espana
    Temas
    14
    Mensajes
    69


    Otra cosa amigo, hay como un escalon en el pega que has puesto, ¿puede ser el bueno asi?:

    //mbox.cfg EXPLANATION and EXAMPLES
     
    A:
    { 0 }
    // for QBoxHD receivers or for any receivers if needed it
    //A: { x }
    //Choose adapter path
    //x=0 -> /dev/dvb/adapter0/
    //x=1 -> /dev/dvb/adapter1/
    //x=2 -> /dev/dvb/adapter2/
    //x=.. -> .......
    //default x=0
     
    D:
    { 0 }
    //D: { x }
    //x=0 -> disable
    //x=1 -> enable dbox2 cw writing
    //x=2 -> enable STAPI for IPBOX
    //x=3 -> enable STAPI for Kathrein
    //x=4 -> enable Linux DVB API for Kathrein
    //x=5 -> enable triple dragon
    //x=6 -> enable Qbox HD
    //default disabled
    B: { 0 }
    //B: { x }
    //x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
    //x=1 -> enable
    //default disabled
     
    Z:
    { 11 }{ 192.168.1.xxx 8000 }#IP DE TU PC
    // Z option -> control sending/writing current informations
    // Z: { xy } { IP port }
    // x=0 -> don't print time stamp (in console screen and in debug file)
    // x=1 -> print time stamp ( .... )
    // y=0 -> no writing/sending informations to debug file/destination IP
    // y=1 -> send informations to destination IP but not in debug file
    // y=2 -> write informations to debug file but don't send to destination IP
    // y=3 -> write/send informations to debug file/destination IP
    // IP port -> destination IP and UDP port where to send informations
    // no default
     
    #C: { 127.0.0.1 7999 }
    // C option -> control receiving some command messages localy or from another IP
    // C: { IP port }
    // IP-> your local IP or you DNS
    // port -> on what port you will be waiting command messages
    // no default
     
    U:
    { 0 }
    // U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
    // default only on hello message peer(s) IP are updated !!!
    // U: { x }
    // x=0 -> disabled
    // x=1 -> enabled
    // default disabled
     
    L:
    { 1 }
    // L option -> how mbox to menage virtual card(s) with level 0
    // ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
    // L: { x }
    // x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
    // x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
    // default 1
     
    #G: { /hdd/ }
    //G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
    //Remove #, ONLY if you want to use this option !!!!!!!
     
    T:
    { /tmp/ }
    // T option -> where to store temp files ... (share.info,debug.txt ,etc.)
    // T: { folder_path_to_files, example: T: { /tmp/ } }
    K: { /usr/keys/ }
    // K option -> where is cwshare.cfg,mbox.prio file
    // K: { folder_path_to_files, example: K: { /var/keys/ } }
     
    M:
    { 1 }
    // M option -> Mode option
    // M: { x }
    // x=0 -> local mode no NET
    // x=1 -> NET mode
    // default 0
     
    P:
    { 2/tmp/camd.socket }
     
    // P option -> PMT location (Dont used with linux and windows)
    // you must be tuned to channel so image can generate this file
    // { /tmp/pmt.tmp } for receivers and images that create this file <- use this if you can
    // { /tmp/pmtX.tmp } X-> number -> pmt1.tmp ......
    // { 1/tmp/camd.socket } for enigma 1
    // { 2/tmp/camd.socket } for enigma 2
    W: { 0 }
    // W option -> write raw ECM to ecm.raw file
    // W: { x }
    // x=0 -> disabled
    // x=1 -> enabled
    // default disabled
     
    Q:
    { 15 }
    //Q option -> newcamd connect retry in sec.
    //Q: { x }
    // default 300 sec.
     
    F:
    { 100 }
    //F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
    //F { x } -> decimal in KBytes
    //default 500 KB
     
    J:
    { 1 }
    // J option -> enable adding betacrypt header to N3 ECM for Premier
    // J { x }
    // x = 0 -> disabled
    // x = 1 -> enabled
     
    R:
    { 700000 }
    // only for gboxx, dont work on mbox protocol
    // R option -> resend hello to all peers after X seconds, ony for gboxx peers,not mbox peers
    //default in code 3600 seconds
     
     
    H:
    { 1 1 1 1 1 1 }
    // only for gboxx, dont work on mbox protocol
    // H option -> mapping provid (0-disabled, 1-enabled)
    //H: { a b c d e f }
    //a-> mapping all 0BXX to 0B00
    //b-> mapping 1810 to 1801
    //c-> mapping 1803 to 1801
    //d-> mapping 1802 to 1801
    //e-> mapping 1815 to 1801
    //f-> mapping 1822 to 1801


    Citar Citar  

  5. #5
    Avatar de segurasharing1

    segurasharing1 está desconectado
    Título:  Usuario VIP Rango:  Usuario VIP
    Fecha de ingreso
    Aug-2012
    Receptor
    giga 800 ue
    Firmware
    open LD 1.8
    Nacionalidad
    Espana
    Ubicación
    JAEN
    Temas
    28
    Mensajes
    321


    tu pega eso en tu mbox.cfg te vas a la z y pones la direccion ip de tu pc te vas a telnet reinicia el deco y te debe de valer asi


    Citar Citar  

Subir