cangosta
Se atormenta una vecina
Colaborador
- Registrado
- 4 Abr 2012
- Mensajes
- 505
- Reacciones
- 0
- Puntos
- 19
Hola chicos, tengo un problema en la configuracion de mi sbox (uso sbox 005-2E+cccam), el problema es que no llego a ver las taquis.
A ver si veis algo raro en mi config:
sbox.config
A ver si veis algo raro en mi config:
sbox.config
cccam.cfg[main]server_only=0 # 0=mixed mode 1=only server
log=1 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
logudp=192.168.1.11:3354 # server ip:server port
userspath=/usr/bin/users.sbox # users list
channelinfo=/usr/bin/sbox.channelinfo # channel info
webinterface=1 # 1=web interface on 0=web interface off
webadmin=rootass # userass for webinterface
webport=8181 # web interface port
radegast=0:16050 # 0=radegast server off - 1=radegast server on : radegast server port
use_nagra=1 # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)
prio=1800:0000;0100:1111:2222 # prio caid for dvbapi, caid1rov1;caid2rov2rov1
cccam=0:18000 # 0=cccam server off - 1=cccam server on : cccam server port
betatunnel=1 # 0=betatunnel support disabled 1=betatunnel support enabled
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=50001 # newcamd port
mhz=368 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader, 3=omnikey pcsc reader
cache=22 # how many ecms can be cached, 0 or less=cache disabled
#Nagra2/3 Example
[xxxxxx] # nagra2 camid (4 bytes)
rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
gppkeypubbeta= # alternative method
gppkeypub= # alternative method
boxkey=xxxxxxxxxxxxxxx
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/usr/keys/50001.list # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
users.sbox####################################################################### CONFIGURACION #
######################################################################
SERVER LISTEN PORT : 20000
ALLOW WEBINFO : yes
WEBINFO USERNAME : root
WEBINFO PASSWORD : pass
#TELNETINFO LISTEN PORT : 60000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME : 0
OSD USERNAME : root
OSD PASSWORD : pass
OSD PORT : 80
SHOW TIMING : yes
MINI OSD : yes
DEBUG : no
NEWCAMD CONF :no
DISABLE EMM : no
EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
#MINIMUM DOWNHOPS : 1
SOFTKEY FILE : /usr/keys/SoftCam.Key
#AUTOROLL FILE : /usr/keys/AutoRoll.Key
#STATIC CW FILE : /usr/keys/constant.cw
#CAID PRIO FILE : /etc/CCcam.prio
PROVIDERINFO FILE : /etc/CCcam.providers
CHANNELINFO FILE : /etc/CCcam.channelinfo
#LOG WARNINGS : /tmp/warnings.txt
#DVB API: -1
######################################################################
# ENLACES DE NEWCS Y MBOX #
######################################################################
N: 127.0.0.1 50001 linea sbox 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 #SBOX
######################################################################
## CLIENTES ##
## AQUI PONEMOS LAS LINEAS F ##
######################################################################
F: linea sbox 2 0 1 { 0:0:2 } #esta linea para ir actualizando la card
Aqui los clientes
######################################################################
## SERVIDOR ##
## AQUI PONEMOS LAS LINEAS C ##
######################################################################
NC=linea sbox slot0 1