Resultados 1 al 8 de 8






Consulta Pantallazo verde despues de instalar cccam desde Addons


Estás en el tema Consulta Pantallazo verde despues de instalar cccam desde Addons dentro del subforo GigaBlue HD 800 SE Plus en LonasDigital. Bien amigos aquí expongo mi duda entre tantas muchas, si debo preocuparme después del pantallazo verde que me salio y se reinicio el deco en 10 segundos, por si le va a suceder algo y no funcione correctamente, o no pueda desenvolver su ejecución con normalidad, y lo segundo es saber si para acceder a través de Filezilla al deco, este tiene que estar conectado a la red, y si al reiniciar enigma2 es normal que se me borren todos los canales que hice a través de búsqueda, cuando normalmente he...



Este tema tuvo 5667 Visitas y 7 Respuestas

Actualmente hay 1 usuarios viendo este tema. (0 miembros y 1 visitantes)

  1. #1
    Avatar de Rubeeen

    Rubeeen ha iniciado este hilo.
    Rubeeen está desconectado
    Título:  Usuario VIP Rango:  Usuario VIP
    Fecha de ingreso
    Mar-2013
    Receptor
    SePlus 800HD
    Firmware
    Open LD 2.8
    Nacionalidad
    Espana
    Temas
    32
    Mensajes
    145


    Bien amigos aquí expongo mi duda entre tantas muchas, si debo preocuparme después del pantallazo verde que me salio y se reinicio el deco en 10 segundos, por si le va a suceder algo y no funcione correctamente, o no pueda desenvolver su ejecución con normalidad, y lo segundo es saber si para acceder a través de Filezilla al deco, este tiene que estar conectado a la red, y si al reiniciar enigma2 es normal que se me borren todos los canales que hice a través de búsqueda, cuando normalmente he leído el reinicio de enigma sirve para guardar configuración, es algo que todavía no entiendo muy bien. ¡Un Saludo Loneros!



    Citar Citar  


  2. QoinPro.com: Free Bitcoins every 24 hours


  3. #2
    Avatar de aguilarmercader

    aguilarmercader está desconectado
    Título:  Viejo Troll Cascarrabias Rango:  Usuario PREMIUM
    Fecha de ingreso
    Sep-2012
    Receptor
    GQUAD-QUATRO
    Firmware
    LD 2.9 GTI
    Nacionalidad
    Espana
    Ubicación
    San Javier (MURCIA)
    Edad
    39
    Temas
    150
    Mensajes
    3,101


    Los pantallazos son errores, o bien provocados por algun skin, pluging o lista incorrecta..... no tienes de que preocuparte siempre y cuando sea algo esporadico


    Citar Citar  

  4. #3
    Avatar de Rubeeen

    Rubeeen ha iniciado este hilo.
    Rubeeen está desconectado
    Título:  Usuario VIP Rango:  Usuario VIP
    Fecha de ingreso
    Mar-2013
    Receptor
    SePlus 800HD
    Firmware
    Open LD 2.8
    Nacionalidad
    Espana
    Temas
    32
    Mensajes
    145


    Que me recomiendas, solucionar el error mirando el log, o volver a instalar imagen y empezar de nuevo...


    Citar Citar  

  5. #4
    Avatar de lonas

    lonas está desconectado
    Título:  ✔ User Verified ™ Rango:  Admin & Developer
    Fecha de ingreso
    Sep-2006
    Receptor
    Formuler F1
    Firmware
    OpenLD-3.0
    Nacionalidad
    Espana
    Ubicación
    Planeta Marte
    Edad
    36
    Temas
    1614
    Mensajes
    23,416


    Cita Iniciado por Rubeeen Ver mensaje
    Que me recomiendas, solucionar el error mirando el log, o volver a instalar imagen y empezar de nuevo...
    Mirar el log y ver de donde es el fallo, eso lo primero, luego si no eres capaz de solucionarlo por que es algo que se te escapa de las manos pues instalación limpia y arreando.
    Si te gustó este post, dale arriba a los botones de Me gusta (facebook) Twitter y google +1 que no te llevará ni 5 segundos xD

    Recuerda:
    El trabajo que realizo es de manera altruista y seguirá siendo así siempre, pero nunca viene mal un poco de ayuda,apoyo y motivación para continuar creando y creciendo en lo que uno realiza.
    Si estas satisfecho y te apetece,puedes contribuir con una donación :

    No se resuelven dudas por Privados ni por E-mail,las incidencias se consultan en el foro y se resuelven entre todos.

    Sígueme en Twitter: https://twitter.com/javilonas


    Citar Citar  

  6. Los siguientes usuarios agradecieron a lonas por su mensaje :

    albertgr30 (14-03-14)

  7. #5
    Avatar de Rubeeen

    Rubeeen ha iniciado este hilo.
    Rubeeen está desconectado
    Título:  Usuario VIP Rango:  Usuario VIP
    Fecha de ingreso
    Mar-2013
    Receptor
    SePlus 800HD
    Firmware
    Open LD 2.8
    Nacionalidad
    Espana
    Temas
    32
    Mensajes
    145


    Cita Iniciado por lonas Ver mensaje
    Mirar el log y ver de donde es el fallo, eso lo primero, luego si no eres capaz de solucionarlo por que es algo que se te escapa de las manos pues instalación limpia y arreando.
    Por fin lonas pude entrar por FTP al log, y en apartado messages me pone todo esto haber si sabes a que es debido. ¡Un Saludo!
    Última edición por Rubeeen; 13-11-13 a las 04:42


    Citar Citar  

  8. #6
    Avatar de lonas

    lonas está desconectado
    Título:  ✔ User Verified ™ Rango:  Admin & Developer
    Fecha de ingreso
    Sep-2006
    Receptor
    Formuler F1
    Firmware
    OpenLD-3.0
    Nacionalidad
    Espana
    Ubicación
    Planeta Marte
    Edad
    36
    Temas
    1614
    Mensajes
    23,416


    Cita Iniciado por Rubeeen Ver mensaje
    Por fin lonas pude entrar por FTP al log, y en apartado messages me pone todo esto haber si sabes a que es debido. ¡Un Saludo!

    Código:
    Jan  1 01:00:18 gb800seplus syslog.info syslogd started: BusyBox v1.19.4
    Jan  1 01:00:18 gb800seplus user.notice kernel: klogd started: BusyBox v1.19.4 (2013-11-10 22:00:43 CET)
    Jan  1 01:00:18 gb800seplus user.notice kernel: Linux version 3.8.7 (lonas@lonas-linux) (gcc version 4.6.4 20120303 (prerelease) (GCC) ) #5 Sat Nov 9 12:34:09 CET 2013
    Jan  1 01:00:18 gb800seplus user.info kernel: Fetching vars from bootloader... found 9 vars.
    Jan  1 01:00:18 gb800seplus user.info kernel: Options: enet_en=1 enet0_mii=0 enet_no_mdio=0 enet1_en=0 moca=0
    Jan  1 01:00:18 gb800seplus user.info kernel:          sata=0 docsis=0 pci=0 pcie=0 smp=0 usb=1
    Jan  1 01:00:18 gb800seplus user.info kernel: Using 512 MB + 0 MB RAM (from CFE)
    Jan  1 01:00:18 gb800seplus user.info kernel: MEMC0 split: 256 MB -> Linux; 256 MB -> extra bmem
    Jan  1 01:00:18 gb800seplus user.info kernel: CPU revision is: 00029032 (Broadcom BMIPS3300)
    Jan  1 01:00:18 gb800seplus user.info kernel: Determined physical RAM map:
    Jan  1 01:00:18 gb800seplus user.info kernel:  memory: 10000000 @ 00000000 (usable)
    Jan  1 01:00:18 gb800seplus user.debug kernel: bmem: adding 232 MB LINUX region at 7 MB (0x0e8a8000@0x00758000)
    Jan  1 01:00:18 gb800seplus user.info kernel: bmem: adding 16 MB RESERVED region at 240 MB (0x01000000@0x0f000000)
    Jan  1 01:00:18 gb800seplus user.warn kernel: Zone ranges:
    Jan  1 01:00:18 gb800seplus user.warn kernel:   Normal   [mem 0x00000000-0x0fffffff]
    Jan  1 01:00:18 gb800seplus user.warn kernel: Movable zone start for each node
    Jan  1 01:00:18 gb800seplus user.warn kernel: Early memory node ranges
    Jan  1 01:00:18 gb800seplus user.warn kernel:   node   0: [mem 0x00000000-0x0fffffff]
    Jan  1 01:00:18 gb800seplus user.debug kernel: On node 0 totalpages: 65536
    Jan  1 01:00:18 gb800seplus user.debug kernel: free_area_init_node: node 0, pgdat 807063a0, node_mem_map 81000000
    Jan  1 01:00:18 gb800seplus user.debug kernel:   Normal zone: 512 pages used for memmap
    Jan  1 01:00:18 gb800seplus user.debug kernel:   Normal zone: 0 pages reserved
    Jan  1 01:00:18 gb800seplus user.debug kernel:   Normal zone: 65024 pages, LIFO batch:15
    Jan  1 01:00:18 gb800seplus user.warn kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
    Jan  1 01:00:18 gb800seplus user.warn kernel: Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
    Jan  1 01:00:18 gb800seplus user.debug kernel: pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
    Jan  1 01:00:18 gb800seplus user.debug kernel: pcpu-alloc: [0] 0 
    Jan  1 01:00:18 gb800seplus user.warn kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
    Jan  1 01:00:18 gb800seplus user.notice kernel: Kernel command line:  ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=256M@512M bmem=16M console=ttyS0,115200n8
    Jan  1 01:00:18 gb800seplus user.info kernel: PID hash table entries: 1024 (order: 0, 4096 bytes)
    Jan  1 01:00:18 gb800seplus user.info kernel: Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Jan  1 01:00:18 gb800seplus user.info kernel: Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Jan  1 01:00:18 gb800seplus user.notice kernel: __ex_table already sorted, skipping sort
    Jan  1 01:00:19 gb800seplus user.info kernel: Memory: 235948k/262144k available (5807k kernel code, 26196k reserved, 1383k data, 228k init, 0k highmem)
    Jan  1 01:00:19 gb800seplus user.info kernel: NR_IRQS:160
    Jan  1 01:00:19 gb800seplus user.debug kernel: Measuring MIPS counter frequency...
    Jan  1 01:00:19 gb800seplus user.info kernel: Detected MIPS clock frequency: 751 MHz (375.759 MHz counter)
    Jan  1 01:00:19 gb800seplus user.info kernel: Console: colour dummy device 80x25
    Jan  1 01:00:19 gb800seplus user.info kernel: Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)
    Jan  1 01:00:19 gb800seplus user.info kernel: pid_max: default: 32768 minimum: 301
    Jan  1 01:00:19 gb800seplus user.info kernel: Mount-cache hash table entries: 512
    Jan  1 01:00:19 gb800seplus user.info kernel: devtmpfs: initialized
    Jan  1 01:00:19 gb800seplus user.info kernel: bmem: adding extra 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
    Jan  1 01:00:19 gb800seplus user.info kernel: NET: Registered protocol family 16
    Jan  1 01:00:19 gb800seplus user.info kernel: USB0: power enable is active high; overcurrent is active low
    Jan  1 01:00:19 gb800seplus user.info kernel: bio: create slab <bio-0> at 0
    Jan  1 01:00:19 gb800seplus user.notice kernel: SCSI subsystem initialized
    Jan  1 01:00:19 gb800seplus user.debug kernel: libata version 3.00 loaded.
    Jan  1 01:00:19 gb800seplus user.info kernel: usbcore: registered new interface driver usbfs
    Jan  1 01:00:19 gb800seplus user.info kernel: usbcore: registered new interface driver hub
    Jan  1 01:00:19 gb800seplus user.info kernel: usbcore: registered new device driver usb
    Jan  1 01:00:19 gb800seplus user.info kernel: Linux video capture interface: v2.00
    Jan  1 01:00:19 gb800seplus user.info kernel: Advanced Linux Sound Architecture Driver Initialized.
    Jan  1 01:00:19 gb800seplus user.info kernel: Bluetooth: Core ver 2.16
    Jan  1 01:00:19 gb800seplus user.info kernel: NET: Registered protocol family 31
    Jan  1 01:00:19 gb800seplus user.info kernel: Bluetooth: HCI device and connection manager initialized
    Jan  1 01:00:19 gb800seplus user.info kernel: Bluetooth: HCI socket layer initialized
    Jan  1 01:00:19 gb800seplus user.info kernel: Bluetooth: L2CAP socket layer initialized
    Jan  1 01:00:19 gb800seplus user.info kernel: Bluetooth: SCO socket layer initialized
    Jan  1 01:00:19 gb800seplus user.info kernel: cfg80211: Calling CRDA to update world regulatory domain
    Jan  1 01:00:19 gb800seplus user.info kernel: Switching to clocksource wktmr
    Jan  1 01:00:19 gb800seplus user.notice kernel: FS-Cache: Loaded
    Jan  1 01:00:19 gb800seplus user.info kernel: NET: Registered protocol family 2
    Jan  1 01:00:19 gb800seplus user.info kernel: TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    Jan  1 01:00:19 gb800seplus user.info kernel: TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
    Jan  1 01:00:19 gb800seplus user.info kernel: TCP: Hash tables configured (established 2048 bind 2048)
    Jan  1 01:00:19 gb800seplus user.info kernel: TCP: reno registered
    Jan  1 01:00:19 gb800seplus user.info kernel: UDP hash table entries: 256 (order: 0, 4096 bytes)
    Jan  1 01:00:19 gb800seplus user.info kernel: UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    Jan  1 01:00:19 gb800seplus user.info kernel: NET: Registered protocol family 1
    Jan  1 01:00:19 gb800seplus user.info kernel: RPC: Registered named UNIX socket transport module.
    Jan  1 01:00:19 gb800seplus user.info kernel: RPC: Registered udp transport module.
    Jan  1 01:00:19 gb800seplus user.info kernel: RPC: Registered tcp transport module.
    Jan  1 01:00:19 gb800seplus user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
    Jan  1 01:00:19 gb800seplus user.notice kernel: NFS: Registering the id_resolver key type
    Jan  1 01:00:19 gb800seplus user.notice kernel: Key type id_resolver registered
    Jan  1 01:00:19 gb800seplus user.notice kernel: Key type id_legacy registered
    Jan  1 01:00:19 gb800seplus user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    Jan  1 01:00:19 gb800seplus user.info kernel: fuse init (API version 7.20)
    Jan  1 01:00:19 gb800seplus user.info kernel: msgmni has been set to 460
    Jan  1 01:00:19 gb800seplus user.info kernel: io scheduler noop registered
    Jan  1 01:00:19 gb800seplus user.info kernel: io scheduler cfq registered (default)
    Jan  1 01:00:19 gb800seplus user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jan  1 01:00:19 gb800seplus user.info kernel: serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62) is a 16550A
    Jan  1 01:00:19 gb800seplus user.info kernel: console [ttyS0] enabled
    Jan  1 01:00:19 gb800seplus user.info kernel: serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63) is a 16550A
    Jan  1 01:00:19 gb800seplus user.info kernel: serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64) is a 16550A
    Jan  1 01:00:19 gb800seplus user.info kernel: loop: module loaded
    Jan  1 01:00:19 gb800seplus user.info kernel: brcmstb_nand: NAND controller driver is loaded
    Jan  1 01:00:19 gb800seplus user.debug kernel: __clk_enable: network [1]
    Jan  1 01:00:19 gb800seplus user.debug kernel: __clk_enable: enet [1]
    Jan  1 01:00:19 gb800seplus user.debug kernel: bcm7552_pm_genet_enable 00
    Jan  1 01:00:19 gb800seplus user.info kernel: Config internal EPHY through MDIO
    Jan  1 01:00:19 gb800seplus user.debug kernel: __clk_disable: enet [0]
    Jan  1 01:00:19 gb800seplus user.debug kernel: bcm7552_pm_genet_disable 00
    Jan  1 01:00:19 gb800seplus user.debug kernel: __clk_disable: network [0]
    Jan  1 01:00:19 gb800seplus user.info kernel: usbcore: registered new interface driver zd1201
    Jan  1 01:00:19 gb800seplus user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jan  1 01:00:19 gb800seplus user.debug kernel: __clk_enable: usb [1]
    Jan  1 01:00:19 gb800seplus user.debug kernel: bcm7552_pm_usb_enable 00
    Jan  1 01:00:19 gb800seplus user.info kernel: ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    Jan  1 01:00:19 gb800seplus user.info kernel: ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    Jan  1 01:00:19 gb800seplus user.info kernel: ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
    Jan  1 01:00:19 gb800seplus user.info kernel: ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    Jan  1 01:00:19 gb800seplus user.info kernel: hub 1-0:1.0: USB hub found
    Jan  1 01:00:19 gb800seplus user.info kernel: hub 1-0:1.0: 2 ports detected
    Jan  1 01:00:19 gb800seplus user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Jan  1 01:00:19 gb800seplus user.info kernel: ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    Jan  1 01:00:19 gb800seplus user.info kernel: ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
    Jan  1 01:00:19 gb800seplus user.info kernel: ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
    Jan  1 01:00:19 gb800seplus user.info kernel: hub 2-0:1.0: USB hub found
    Jan  1 01:00:19 gb800seplus user.info kernel: hub 2-0:1.0: 2 ports detected
    Jan  1 01:00:19 gb800seplus user.info kernel: Initializing USB Mass Storage driver...
    Jan  1 01:00:19 gb800seplus user.info kernel: usbcore: registered new interface driver usb-storage
    Jan  1 01:00:19 gb800seplus user.info kernel: USB Mass Storage support registered.
    Jan  1 01:00:19 gb800seplus user.info kernel: mousedev: PS/2 mouse device common for all mice
    Jan  1 01:00:19 gb800seplus user.info kernel: i2c /dev entries driver
    Jan  1 01:00:19 gb800seplus user.info kernel: usbcore: registered new interface driver btusb
    Jan  1 01:00:19 gb800seplus user.info kernel: usbcore: registered new interface driver usbhid
    Jan  1 01:00:19 gb800seplus user.info kernel: usbhid: USB HID core driver
    Jan  1 01:00:19 gb800seplus user.info kernel: TCP: cubic registered
    Jan  1 01:00:19 gb800seplus user.info kernel: NET: Registered protocol family 17
    Jan  1 01:00:19 gb800seplus user.info kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Jan  1 01:00:19 gb800seplus user.info kernel: Bluetooth: HIDP socket layer initialized
    Jan  1 01:00:19 gb800seplus user.notice kernel: Key type dns_resolver registered
    Jan  1 01:00:19 gb800seplus user.info kernel: EBI CS0: setting up NAND flash (primary)
    Jan  1 01:00:19 gb800seplus user.info kernel: ONFI param page 0 valid
    Jan  1 01:00:19 gb800seplus user.info kernel: ONFI flash detected
    Jan  1 01:00:19 gb800seplus user.info kernel: NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD/Spansion S34ML01G1), 128MiB, page size: 2048, OOB size: 64
    Jan  1 01:00:19 gb800seplus user.info kernel: ONFI param page 0 valid
    Jan  1 01:00:19 gb800seplus user.info kernel: ONFI flash detected
    Jan  1 01:00:19 gb800seplus user.info kernel: NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD/Spansion S34ML01G1), 128MiB, page size: 2048, OOB size: 64
    Jan  1 01:00:19 gb800seplus user.info kernel: brcmnand brcmnand.0: 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-15
    Jan  1 01:00:19 gb800seplus user.info kernel: Bad block table found at page 65472, version 0x01
    Jan  1 01:00:19 gb800seplus user.info kernel: Bad block table found at page 65408, version 0x01
    Jan  1 01:00:19 gb800seplus user.notice kernel: Creating 3 MTD partitions on "brcmnand.0":
    Jan  1 01:00:19 gb800seplus user.notice kernel: 0x000001000000-0x000008000000 : "rootfs"
    Jan  1 01:00:19 gb800seplus user.err kernel: memory allocation error while creating partitions for "brcmnand.0"
    Jan  1 01:00:19 gb800seplus user.info kernel: PM: CP0 COUNT/COMPARE frequency depends on divisor
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBI: attaching mtd0 to ubi0
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBI: scanning is finished
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBI: attached mtd0 (name "rootfs", size 112 MiB) to ubi0
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBI: good PEBs: 892, bad PEBs: 4, corrupted PEBs: 0
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1757091011
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBI: available PEBs: 0, total reserved PEBs: 892, PEBs reserved for bad PEB handling: 16
    Jan  1 01:00:19 gb800seplus user.info kernel: ALSA device list:
    Jan  1 01:00:19 gb800seplus user.info kernel:   No soundcards found.
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBI: background thread "ubi_bgt0d" started, PID 41
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBIFS: background thread "ubifs_bgt0_0" started, PID 42
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBIFS: FS size: 109326336 bytes (104 MiB, 861 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBIFS: reserved for root: 0 bytes (0 KiB)
    Jan  1 01:00:19 gb800seplus user.notice kernel: UBIFS: media format: w4/r0 (latest is w4/r0), UUID DF14D806-7F9F-4C32-9AC8-4CE1AFB2711E, small LPT model
    Jan  1 01:00:19 gb800seplus user.info kernel: VFS: Mounted root (ubifs filesystem) on device 0:10.
    Jan  1 01:00:19 gb800seplus user.info kernel: devtmpfs: mounted
    Jan  1 01:00:19 gb800seplus user.info kernel: Freeing unused kernel memory: 228k freed
    Jan  1 01:00:19 gb800seplus user.warn kernel: Algorithmics/MIPS FPU Emulator v1.5
    Jan  1 01:00:19 gb800seplus user.info kernel: fb0: brcmfb frame buffer device
    Jan  1 01:00:19 gb800seplus user.info kernel: input: gigablue remote control as /devices/virtual/input/input0
    Jan  1 01:00:19 gb800seplus user.info kernel: DVB: registering new adapter (gbueplus)
    Jan  1 01:00:19 gb800seplus user.info kernel: dvb dvb.0: DVB: registering adapter 0 frontend 0 (BCM7346 (internal))...
    Jan  1 01:00:19 gb800seplus user.info kernel: dvb dvb.0: DVB: registering adapter 0 frontend 0 (GIGA DVB-C/T NIM (SI))...
    Jan  1 01:00:19 gb800seplus user.info kernel: NET: Registered protocol family 10
    Jan  1 01:00:19 gb800seplus user.debug kernel: __clk_enable: network [1]
    Jan  1 01:00:19 gb800seplus user.debug kernel: __clk_enable: enet [1]
    Jan  1 01:00:19 gb800seplus user.debug kernel: bcm7552_pm_genet_enable 00
    Jan  1 01:00:19 gb800seplus user.crit kernel: eth0 cable plugged in, powering up
    Jan  1 01:00:19 gb800seplus user.info kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    Jan  1 01:00:19 gb800seplus user.crit kernel: eth0 cable unplugged, powering down
    Jan  1 01:00:19 gb800seplus user.warn kernel: svc: failed to register lockdv1 RPC service (errno 124).
    Jan  1 01:00:19 gb800seplus daemon.info avahi-daemon[544]: Found user 'avahi' (UID 998) and group 'avahi' (GID 998).
    Jan  1 01:00:19 gb800seplus daemon.info avahi-daemon[544]: Successfully dropped root privileges.
    Jan  1 01:00:19 gb800seplus daemon.info avahi-daemon[544]: avahi-daemon 0.6.31 starting up.
    Jan  1 01:00:19 gb800seplus daemon.info avahi-daemon[544]: Successfully called chroot().
    Jan  1 01:00:19 gb800seplus daemon.info avahi-daemon[544]: Successfully dropped remaining capabilities.
    Jan  1 01:00:19 gb800seplus daemon.info avahi-daemon[544]: Loading service file /services/sftp-ssh.service.
    Jan  1 01:00:19 gb800seplus daemon.info avahi-daemon[544]: Loading service file /services/ssh.service.
    Jan  1 01:00:19 gb800seplus daemon.info avahi-daemon[544]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.41.
    Jan  1 01:00:19 gb800seplus daemon.info avahi-daemon[544]: New relevant interface eth0.IPv4 for mDNS.
    Jan  1 01:00:19 gb800seplus daemon.info avahi-daemon[544]: Network interface enumeration completed.
    Jan  1 01:00:19 gb800seplus daemon.info avahi-daemon[544]: Registering new address record for 192.168.1.41 on eth0.IPv4.
    Jan  1 01:00:19 gb800seplus daemon.info avahi-daemon[544]: Registering HINFO record with values 'MIPS'/'LINUX'.
    Jan  1 01:00:20 gb800seplus daemon.info avahi-daemon[544]: Server startup complete. Host name is gb800seplus.local. Local service cookie is 1270073061.
    Jan  1 01:00:21 gb800seplus daemon.info avahi-daemon[544]: Service "gb800seplus" (/services/ssh.service) successfully established.
    Jan  1 01:00:21 gb800seplus daemon.info avahi-daemon[544]: Service "gb800seplus" (/services/sftp-ssh.service) successfully established.
    Jan  1 01:00:39 gb800seplus user.warn kernel: Hotplug - connected=1,1,1
    Jan  1 01:00:54 gb800seplus daemon.err ntpdate[265]: Can't find host pool.ntp.org: Name or service not known (-2)
    Jan  1 01:00:54 gb800seplus daemon.err ntpdate[265]: no servers can be used, exiting
    Jan  1 01:00:59 gb800seplus daemon.err ntpdate[554]: Can't find host pool.ntp.org: Name or service not known (-2)
    Jan  1 01:00:59 gb800seplus daemon.err ntpdate[554]: no servers can be used, exiting
    Jan  1 01:01:03 gb800seplus daemon.notice automount[643]: >> ntfs-3g: Failed to access volume '/dev/logs': No such file or directory
    Jan  1 01:01:03 gb800seplus daemon.notice automount[643]: >> ntfs-3g 2011.4.12 integrated FUSE 27 - Third Generation NTFS Driver
    Jan  1 01:01:03 gb800seplus daemon.notice automount[643]: >>         Configuration type 1, XATTRS are on, POSIX ACLS are off
    Jan  1 01:01:03 gb800seplus daemon.notice automount[643]: >> Copyright (C) 2005-2007 Yura Pakhuchiy
    Jan  1 01:01:03 gb800seplus daemon.notice automount[643]: >> Copyright (C) 2006-2009 Szabolcs Szakacsits
    Jan  1 01:01:03 gb800seplus daemon.notice automount[643]: >> Copyright (C) 2007-2011 Jean-Pierre Andre
    Jan  1 01:01:03 gb800seplus daemon.notice automount[643]: >> Copyright (C) 2009 Erik Larsson
    Jan  1 01:01:03 gb800seplus daemon.notice automount[643]: >> Usage:    ntfs-3g [-o option[,...]] <device|image_file> <mount_point>
    Jan  1 01:01:03 gb800seplus daemon.notice automount[643]: >> Options:  ro (read-only mount), remove_hiberfile, uid=, gid=,
    Jan  1 01:01:03 gb800seplus daemon.notice automount[643]: >>           umask=, fmask=, dmask=, streams_interface=.
    Jan  1 01:01:03 gb800seplus daemon.notice automount[643]: >>           Please see the details in the manual (type: man ntfs-3g).
    Jan  1 01:01:03 gb800seplus daemon.notice automount[643]: >> Example: ntfs-3g /dev/sda1 /mnt/windows
    Jan  1 01:01:03 gb800seplus daemon.notice automount[643]: >> News, support and information:  Tuxera | Leading NTFS, exFAT Interoperability on Android, Linux, QNX and more
    Jan  1 01:01:03 gb800seplus daemon.notice automount[643]: >> mount: mounting /dev/logs on /autofs/logs failed: No such file or directory
    Jan  1 01:01:03 gb800seplus daemon.err automount[643]: mount(generic): failed to mount /dev/logs (type auto) on /autofs/logs
    Jan  1 01:01:03 gb800seplus daemon.err automount[643]: failed to mount /autofs/logs
    Nov 12 16:07:38 gb800seplus user.warn kernel: Hotplug - connected=0,0,0
    Nov 12 16:07:39 gb800seplus user.warn kernel: Hotplug - connected=1,1,1
    Nov 12 16:08:01 gb800seplus daemon.err ntpdate[638]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 16:08:01 gb800seplus daemon.err ntpdate[638]: no servers can be used, exiting
    Nov 12 16:08:20 gb800seplus cron.err crond[453]: time disparity of 23071147 minutes detected
    Nov 12 16:38:41 gb800seplus daemon.err ntpdate[1590]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 16:38:41 gb800seplus daemon.err ntpdate[1590]: no servers can be used, exiting
    Nov 12 17:09:21 gb800seplus daemon.err ntpdate[2510]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 17:09:21 gb800seplus daemon.err ntpdate[2510]: no servers can be used, exiting
    Nov 12 17:40:01 gb800seplus daemon.err ntpdate[3429]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 17:40:01 gb800seplus daemon.err ntpdate[3429]: no servers can be used, exiting
    Nov 12 18:10:41 gb800seplus daemon.err ntpdate[4348]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 18:10:41 gb800seplus daemon.err ntpdate[4348]: no servers can be used, exiting
    Nov 12 18:41:21 gb800seplus daemon.err ntpdate[5267]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 18:41:21 gb800seplus daemon.err ntpdate[5267]: no servers can be used, exiting
    Nov 12 19:12:01 gb800seplus daemon.err ntpdate[6186]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 19:12:01 gb800seplus daemon.err ntpdate[6186]: no servers can be used, exiting
    Nov 12 19:42:42 gb800seplus daemon.err ntpdate[7105]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 19:42:42 gb800seplus daemon.err ntpdate[7105]: no servers can be used, exiting
    Nov 12 20:13:22 gb800seplus daemon.err ntpdate[8024]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 20:13:22 gb800seplus daemon.err ntpdate[8024]: no servers can be used, exiting
    Nov 12 20:44:02 gb800seplus daemon.err ntpdate[8944]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 20:44:02 gb800seplus daemon.err ntpdate[8944]: no servers can be used, exiting
    Nov 12 21:14:42 gb800seplus daemon.err ntpdate[9863]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 21:14:42 gb800seplus daemon.err ntpdate[9863]: no servers can be used, exiting
    Nov 12 21:45:22 gb800seplus daemon.err ntpdate[10782]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 21:45:22 gb800seplus daemon.err ntpdate[10782]: no servers can be used, exiting
    Nov 12 22:16:02 gb800seplus daemon.err ntpdate[11701]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 22:16:02 gb800seplus daemon.err ntpdate[11701]: no servers can be used, exiting
    Nov 12 22:46:42 gb800seplus daemon.err ntpdate[12620]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 22:46:42 gb800seplus daemon.err ntpdate[12620]: no servers can be used, exiting
    Nov 12 23:17:22 gb800seplus daemon.err ntpdate[13539]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 23:17:22 gb800seplus daemon.err ntpdate[13539]: no servers can be used, exiting
    Nov 12 23:48:02 gb800seplus daemon.err ntpdate[14459]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 12 23:48:02 gb800seplus daemon.err ntpdate[14459]: no servers can be used, exiting
    Nov 13 00:18:43 gb800seplus daemon.err ntpdate[15378]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 13 00:18:43 gb800seplus daemon.err ntpdate[15378]: no servers can be used, exiting
    Nov 13 00:49:23 gb800seplus daemon.err ntpdate[16297]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 13 00:49:23 gb800seplus daemon.err ntpdate[16297]: no servers can be used, exiting
    Nov 13 01:20:03 gb800seplus daemon.err ntpdate[17216]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 13 01:20:03 gb800seplus daemon.err ntpdate[17216]: no servers can be used, exiting
    Nov 13 01:50:43 gb800seplus daemon.err ntpdate[18135]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 13 01:50:43 gb800seplus daemon.err ntpdate[18135]: no servers can be used, exiting
    Nov 13 02:21:23 gb800seplus daemon.err ntpdate[19054]: Can't find host pool.ntp.org: Name or service not known (-2)
    Nov 13 02:21:23 gb800seplus daemon.err ntpdate[19054]: no servers can be used, exiting
    Nov 13 02:37:10 gb800seplus user.crit kernel: eth0 cable plugged in, powering up
    Nov 13 02:37:11 gb800seplus user.crit kernel: eth0 Link UP.
    Nov 13 02:37:11 gb800seplus user.crit kernel: Auto config phy
    Nov 13 02:37:11 gb800seplus user.info kernel: eth0: Link is up, 100 Mbps Full Duplex
    Nov 13 02:37:11 gb800seplus user.info kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    Nov 13 02:37:13 gb800seplus daemon.info avahi-daemon[544]: Registering new address record for fe80::a13:28ff:fe00:0 on eth0.*.
    Nov 13 02:37:41 gb800seplus user.warn kernel: Hotplug - connected=1,1,1
    Nov 13 02:37:41 gb800seplus user.warn kernel: Hotplug - connected=1,1,1
    Nov 13 02:37:45 gb800seplus user.warn kernel: Hotplug - connected=0,0,0
    Nov 13 02:37:46 gb800seplus user.warn kernel: Hotplug - connected=1,1,1

    Ese log no es el que te he pedido, el que quiero ver es el de enigma, el crash-log, que es donde estará el error del pantallazo verde
    Si te gustó este post, dale arriba a los botones de Me gusta (facebook) Twitter y google +1 que no te llevará ni 5 segundos xD

    Recuerda:
    El trabajo que realizo es de manera altruista y seguirá siendo así siempre, pero nunca viene mal un poco de ayuda,apoyo y motivación para continuar creando y creciendo en lo que uno realiza.
    Si estas satisfecho y te apetece,puedes contribuir con una donación :

    No se resuelven dudas por Privados ni por E-mail,las incidencias se consultan en el foro y se resuelven entre todos.

    Sígueme en Twitter: https://twitter.com/javilonas


    Citar Citar  

  9. #7
    Avatar de Rubeeen

    Rubeeen ha iniciado este hilo.
    Rubeeen está desconectado
    Título:  Usuario VIP Rango:  Usuario VIP
    Fecha de ingreso
    Mar-2013
    Receptor
    SePlus 800HD
    Firmware
    Open LD 2.8
    Nacionalidad
    Espana
    Temas
    32
    Mensajes
    145


    Pues no me sale o no lo encuentro el crashlog, entro en el apartado de log y no lo encuentro si me pudieras especificar donde se encuentra. ¡Un Saludo!


    Citar Citar  

  10. #8
    Avatar de Rubeeen

    Rubeeen ha iniciado este hilo.
    Rubeeen está desconectado
    Título:  Usuario VIP Rango:  Usuario VIP
    Fecha de ingreso
    Mar-2013
    Receptor
    SePlus 800HD
    Firmware
    Open LD 2.8
    Nacionalidad
    Espana
    Temas
    32
    Mensajes
    145


    Amigo Lonas volvi a reinstalar la imagen, instale cccam desde addons el 2.0.9, y al hacer la busqueda de canales me volvio a salir la pantalla verde con esto. Es el archivo crashlog. ¡Un saludo!

    <?xml version="1.0" encoding="utf-8"?>
    <openLD>
    <enigma2>
    <crashdate>mié nov 13 13:07:08 2013</crashdate>
    <compiledate>Nov 10 2013</compiledate>
    <contactemail>forum at www.lonasdigital.com</contactemail>
    <!-- Please email this crashlog to above address -->
    <skin>DMConcinnity-HD/skin.xml</skin>
    <sourcedate>2013-11-10</sourcedate>
    <version>3.0.0</version>
    </enigma2>
    <image>
    <stbmodel>gigablue</stbmodel>
    <kernelversion>
    <![CDATA[
    Linux gb800seplus 3.8.7 #5 Sat Nov 9 12:34:09 CET 2013 mips GNU/Linux
    ]]>
    </kernelversion>
    <kernelcmdline> ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=256M@512M bmem=16M console=ttyS0,115200n8</kernelcmdline>
    <nimsockets>NIM Socket 0:</nimsockets>
    <imageversion>
    <![CDATA[
    box_type=gb800seplus
    build_type=0
    version=1.0
    build=31
    drivers=N/A
    date=20131110205439
    comment=openLD
    rel="nofollow" target=9
    creator=OpenLD
    url=http://www.lonasdigital.com
    catalog=http://www.lonasdigital.com
    ]]>
    </imageversion>
    <imageissue>
    <![CDATA[
    Welcome to OpenLD for %h
    openld 1.0 %h


    ]]>
    </imageissue>
    </image>
    <software>
    <enigma2software>
    <![CDATA[
    enigma2 - 2.8+git16953+7763117-r129
    enigma2-fonts - 2010.11.14-r129
    enigma2-plugin-drivers-network-usb-asix - 1.0-r1
    enigma2-plugin-drivers-network-usb-ath9k-htc - 1.0-r1
    enigma2-plugin-drivers-network-usb-ax88179-178a - 1.0-r1
    enigma2-plugin-drivers-network-usb-carl9170 - 1.0-r1
    enigma2-plugin-drivers-network-usb-r8712u - 1.0-r2
    enigma2-plugin-drivers-network-usb-rt2500 - 1.0-r1
    enigma2-plugin-drivers-network-usb-rt2800 - 1.0-r1
    enigma2-plugin-drivers-network-usb-rt3573 - 1.0-r1
    enigma2-plugin-drivers-network-usb-rt5572 - 1.0-r1
    enigma2-plugin-drivers-network-usb-rt73 - 1.0-r2
    enigma2-plugin-drivers-network-usb-rtl8187 - 1.0-r1
    enigma2-plugin-drivers-network-usb-rtl8192cu - 1.0-r1
    enigma2-plugin-drivers-network-usb-smsc75xx - 1.0-r2
    enigma2-plugin-drivers-network-usb-zd1211rw - 1.0-r1
    enigma2-plugin-drivers-usbserial - 1.0-r0
    enigma2-plugin-extensions-autotimer - git5436+2c4faf4-r37
    enigma2-plugin-extensions-cooltvguide - 6.1+git21+ffa5320-r1
    enigma2-plugin-extensions-cutlisteditor - 2.8+git16953+7763117-r129
    enigma2-plugin-extensions-dvdplayer - 2.8+git16953+7763117-r129
    enigma2-plugin-extensions-enhancedmoviecenter - 4.0.+git873+7ee5514-r6
    enigma2-plugin-extensions-epgsearch - git5436+2c4faf4-r37
    enigma2-plugin-extensions-imdb - git5436+2c4faf4-r37
    enigma2-plugin-extensions-ldteam - 2.8+git16953+7763117-r129
    enigma2-plugin-extensions-mediaplayer - 2.8+git16953+7763117-r129
    enigma2-plugin-extensions-mediascanner - 2.8+git16953+7763117-r129
    enigma2-plugin-extensions-openwebif - 0.1+git670+bc2c4fb-r43.72
    enigma2-plugin-extensions-pictureplayer - 2.8+git16953+7763117-r129
    enigma2-plugin-extensions-volume-adjust - 2.8+git16953+7763117-r129
    enigma2-plugin-skins-dmcconcinnityhd - 3.2+git128+991d790-r0
    enigma2-plugin-softcams-cccam - 2.0.9
    enigma2-plugin-systemplugins-autobouquetsmaker - git564+1fcda6d-r89
    enigma2-plugin-systemplugins-blindscan - git564+1fcda6d-r89
    enigma2-plugin-systemplugins-commoninterfaceassignment - 2.8+git16953+7763117-r129
    enigma2-plugin-systemplugins-hdmicec - 2.8+git16953+7763117-r129
    enigma2-plugin-systemplugins-hotplug - 2.8+git16953+7763117-r129
    enigma2-plugin-systemplugins-mphelp - git5436+2c4faf4-r37
    enigma2-plugin-systemplugins-networkbrowser - git5436+2c4faf4-r37
    enigma2-plugin-systemplugins-networkwizard - 2.8+git16953+7763117-r129
    enigma2-plugin-systemplugins-positionersetup - 2.8+git16953+7763117-r129
    enigma2-plugin-systemplugins-satfinder - 2.8+git16953+7763117-r129
    enigma2-plugin-systemplugins-softwaremanager - 2.8+git16953+7763117-r129
    enigma2-plugin-systemplugins-toolkit - git5436+2c4faf4-r37
    enigma2-plugin-systemplugins-vfdcontrol - git564+1fcda6d-r89
    enigma2-plugin-systemplugins-videotune - 2.8+git16953+7763117-r129
    enigma2-plugin-systemplugins-wirelesslan - 2.8+git16953+7763117-r129
    enigma2-skindefault - 1.0+git71+77cd83e-r16
    ]]>
    </enigma2software>
    <xtrendsoftware>
    <![CDATA[
    ethtool - 2.6.36-r5
    ]]>
    </xtrendsoftware>
    <gstreamersoftware>
    <![CDATA[
    gst-plugin-dvbmediasink - 0.10.0+git22+cf49bb0-r16
    gst-plugin-libxt - 0.10.0+git4+568b515-r0
    gst-plugin-subsink - 0.10.0+git5+0cb20d6-r1
    gst-plugins-bad - 0.10.23.1+git12256+0518367-r9
    gst-plugins-bad-cdxaparse - 0.10.23.1+git12256+0518367-r9
    gst-plugins-bad-faad - 0.10.23.1+git12256+0518367-r9
    gst-plugins-bad-fragmented - 0.10.23.1+git12256+0518367-r9
    gst-plugins-bad-mms - 0.10.23.1+git12256+0518367-r9
    gst-plugins-bad-mpegdemux - 0.10.23.1+git12256+0518367-r9
    gst-plugins-bad-rtmp - 0.10.23.1+git12256+0518367-r9
    gst-plugins-bad-vcdsrc - 0.10.23.1+git12256+0518367-r9
    gst-plugins-base - 0.10.36.1+git10189+1e1e6ea-r13
    gst-plugins-base-alsa - 0.10.36.1+git10189+1e1e6ea-r13
    gst-plugins-base-app - 0.10.36.1+git10189+1e1e6ea-r13
    gst-plugins-base-audioconvert - 0.10.36.1+git10189+1e1e6ea-r13
    gst-plugins-base-audioresample - 0.10.36.1+git10189+1e1e6ea-r13
    gst-plugins-base-decodebin - 0.10.36.1+git10189+1e1e6ea-r13
    gst-plugins-base-decodebin2 - 0.10.36.1+git10189+1e1e6ea-r13
    gst-plugins-base-ogg - 0.10.36.1+git10189+1e1e6ea-r13
    gst-plugins-base-playbin - 0.10.36.1+git10189+1e1e6ea-r13
    gst-plugins-base-subparse - 0.10.36.1+git10189+1e1e6ea-r13
    gst-plugins-base-typefindfunctions - 0.10.36.1+git10189+1e1e6ea-r13
    gst-plugins-base-vorbis - 0.10.36.1+git10189+1e1e6ea-r13
    gst-plugins-good - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-apetag - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-audioparsers - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-autodetect - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-avi - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-flac - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-flv - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-icydemux - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-id3demux - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-isomp4 - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-matroska - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-rtp - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-rtpmanager - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-rtsp - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-souphttpsrc - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-udp - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-good-wavparse - 0.10.31.1+git10791+5af6f5b-r14
    gst-plugins-ugly - 0.10.19.1+git4640+5ddd97f-r9
    gst-plugins-ugly-amrnb - 0.10.19.1+git4640+5ddd97f-r9
    gst-plugins-ugly-amrwbdec - 0.10.19.1+git4640+5ddd97f-r9
    gst-plugins-ugly-asf - 0.10.19.1+git4640+5ddd97f-r9
    gst-plugins-ugly-cdio - 0.10.19.1+git4640+5ddd97f-r9
    gst-plugins-ugly-dvdsub - 0.10.19.1+git4640+5ddd97f-r9
    gst-plugins-ugly-mad - 0.10.19.1+git4640+5ddd97f-r9
    gst-plugins-ugly-mpegaudioparse - 0.10.19.1+git4640+5ddd97f-r9
    gst-plugins-ugly-mpegstream - 0.10.19.1+git4640+5ddd97f-r9
    gstreamer - 0.10.36.1+git12096+76fc67b-r8
    ]]>
    </gstreamersoftware>
    </software>
    <crashlogs>
    <enigma2crashlog>
    <![CDATA[
    ep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    (0)fe event: status 0, inversion off, m_tuning 3
    (0)fe event: status 1, inversion off, m_tuning 4
    [SEC] set dynamic current limiting
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12480000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 1880 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 1
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f1(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    (0)fe event: status 0, inversion off, m_tuning 3
    (0)fe event: status 1, inversion off, m_tuning 4
    [SEC] set dynamic current limiting
    (0)fe event: status 0, inversion off, m_tuning 5
    (0)fe event: status 1, inversion off, m_tuning 6
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12515250 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 1915 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 2
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f3(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12522000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 1922 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 1
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f1(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    (0)fe event: status 0, inversion off, m_tuning 3
    (0)fe event: status 1, inversion off, m_tuning 4
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12544750 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 1944 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 2
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f3(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12551500 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 1951 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 1
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f1(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 12574250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 1974 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 2
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f3(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    (0)fe event: status 0, inversion off, m_tuning 3
    (0)fe event: status 1, inversion off, m_tuning 4
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12581000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 1981 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 1
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f1(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12603750 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 2003 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 2
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f3(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12610500 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 2010 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 1
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f1(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12633250 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 2033 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 2
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f3(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    (0)fe event: status 0, inversion off, m_tuning 3
    (0)fe event: status 1, inversion off, m_tuning 4
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12640000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 2040 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 1
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f1(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12662750 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 2062 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 2
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f3(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 12669500 Pol 1 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 2069 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 1
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f1(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12692250 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 2092 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 2
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f3(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    (0)fe event: status 0, inversion off, m_tuning 3
    (0)fe event: status 1, inversion off, m_tuning 4
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12699000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 2099 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 1
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f1(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    (0)fe event: status 0, inversion off, m_tuning 3
    (0)fe event: status 1, inversion off, m_tuning 4
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 1 Freq 12721750 Pol 0 SR 22000000 INV 2 FEC 3 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
    tuning to 2121 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 2
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f3(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    (0)fe event: status 0, inversion off, m_tuning 3
    (0)fe event: status 1, inversion off, m_tuning 4
    OURSTATE: failed, fatal
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12728500 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 2128 mhz
    OURSTATE: tuning
    [SEC] set static current limiting
    [SEC] setTone 0
    [SEC] sleep 25ms
    [SEC] setVoltage 1
    [SEC] sleep 75ms
    set sequence pos 3
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f1(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1, inversion off, m_tuning 2
    [SEC] set dynamic current limiting
    OURSTATE: failed, fatal
    no channels left to scan.
    26 channels scanned, 96 were unavailable.
    26 channels in database.
    can't open /etc/enigma2/userbouquet.LastScanned.tv: No such file or directory
    Renumbering...
    ---- saving lame channel db
    saved 26 channels and 433 services!
    scan done!
    opening frontend 1
    allocate demux
    (1)tune
    OURSTATE: tuning
    PC: 0047ca0c
    00000000 00000001 7666c030 00007391
    00000016 76fd2aa4 0209eb00 00000053
    76f24000 01a7ea98 30303431 30303431
    00000000 2d425644 55412054 35204f54
    020c7060 00000296 7fdb0b08 7fdb0c88
    020e76e8 7fdb0cd4 7fdb171c 00000000
    00000002 76ea12c8 00000001 00000000
    006b0c00 7fdb0a80 7fdb0c00 00480774
    -------
    ]]>
    </enigma2crashlog>
    </crashlogs>
    </openLD>


    Citar Citar  

Subir