• Hola Invitado, nos gustaría recordarte que mantener este sitio en línea conlleva unos gastos mensuales y anuales.

    Sin vuestra ayuda mensual no es posible seguir en pie, no hay mucho más que contar.

    Si quieres colaborar para que sea posible por lo menos seguir en pie como comunidad, puedes hacerlo mediante alguno de los métodos disponibles en esta página: https://www.lonasdigital.com/donaciones/

    Recuerda que si necesitas invitación para acceder al foro, puedes solicitarla en nuestro Grupo de Telegram


Configurar Sbox + Cccam

Rubeeen

Rubeeen

Usuario VIP
Registrado
11 Mar 2013
Mensajes
153
Reacciones
0
Puntos
34
Hola amigos, pues eso quería configurar Sbox como lector, y Cccam como servidor, he leído muchos manuales pero no me queda claro que es lo que tengo que configurar, haber si me podéis echar una mano. ¡Un Saludo! :44:
 
qué imagen usas? qué card quieres configurar?
 
Uso la imagen de el maestro Lonas OpenLD1.2, quisiera configurar una blanquita ¡Un Saludo!
 
Última edición:
tienes los datos de la blanca ¿verdad? postea tu sbox.conf , users.sbox, cccam.cfg sin datos comprometedores
 
Tengo un problema, no me deja descargarlo desde Addons de la imagen, pero no me deja descargar nada. :(
 
sbox.conf

[OCULTAR][main]
server_only=0 # 0=mixed mode 1=only server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
logudp=192.168.1.11:3354 # server ip:server port
userspath=/usr/bin/users.sbox # users list
channelinfo=/usr/bin/sbox.channelinfo # channel info
webinterface=1 # 1=web interface on 0=web interface off
webadmin=root:ldteam # user:pass for webinterface
webport=8181 # web interface port
radegast=0:16050 # 0=radegast server off - 1=radegast server on : radegast server port
use_nagra=1 # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)
prio=1800:0000;0100:1111:2222 # prio caid for dvbapi, caid1:prov1;caid2:prov2:prov1
cccam=0:18000 # 0=cccam server off - 1=cccam server on : cccam server port
betatunnel=1 # 0=betatunnel support disabled 1=betatunnel support enabled


[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=50001 # newcamd port
mhz=368 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader, 3=omnikey pcsc reader
cache=17 # how many ecms can be cached, 0 or less=cache disabled


# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!


#Nagra2/3 Example
[CCCCCCCC] # nagra2 camid (4 bytes)
rsa= # rsa "n" from this card (like newcs)
gppkeypubbeta= # alternative method
gppkeypub= # alternative method
boxkey= # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/usr/keys/50001.list # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid


#Nagra tiger/ncmed Example
[CCCCCCCC] # nagra camid (4 bytes)
emm=2 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid


#Seca Example
[CCCCCCCC] # seca camid (4 bytes)
ok_view=0 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid


#Viaccess Example
[CCCCCCCC] # via camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
aeskey= # aeskey used by nano d2, example: aeskey=01:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA;09:BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid


#Irdeto Example
[CCCCCCCC] # irdeto camid (4 bytes)
camkey=0000000000000000 # CamKEY
camkeydata=00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid


#NDS Example
[CCCCCCCC] # nds camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
boxid= # if sbox can't get boxid from card, add here manually
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid


#Conax Example
[CCCCCCCC] # conax camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
rsa= # rsa ecm used on paired cards
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid[/OCULTAR]

users.sbox

[OCULTAR]#Example configuration file for sbox cardclient server


#Add newcamd user
#NC=dummy dummy slot0
#NC=dummy dummy slot0 0
#NC=dummy dummy slot0 0 150
#NC=dummy dummy slot0 0 150 ip
# | | | | | | |__________ user ip (optional)
# | | | | | |_____________ user timeout in sec min. 150 max. 1440 (optional)
# | | | | |________________ 0=au disabled for this user 1=au enabled for this user (optional)
# | | | |____________________ server to which this user belongs
# | | |__________________________ password for this user
# | |_______________________________ username
# |____________________________________ newcamd client


NC=dummy dummy slot0 1
#NC=dummy dummy slot1 0




#Add radegast server
#RS=ip port caid provider
# | | | | |__________________ provider
# | | | |________________________ caid
# | | |______________________________ server port
# | |__________________________________ server ip
# |____________________________________ radegast server


#RS=127.0.0.1 16050 1800 000000




#Add newcamd server
#NS=ip port user pass deskey au
# | | | | | | |________ enable send emms, 0=send all 1=dont send emm-s 2=dont send emm-u 4=dont send emm-g
# | | | | | |______________ deskey
# | | | | |____________________ password
# | | | |_________________________ user
# | | |______________________________ server port
# | |__________________________________ server ip
# |____________________________________ newcamd server


#NS=127.0.0.1 15050 dummy dummy 0102030405060708091011121314 7




#Add cccam server
#CS=ip port user pass 3
# | | | | | |________________ max hops (min.1 max.6)
# | | | | |____________________ password
# | | | |_________________________ user
# | | |______________________________ server port
# | |__________________________________ server ip
# |____________________________________ cccam server


#CS=127.0.0.1 15050 dummy dummy 3




#Add cccam client
#CC=user pass
#CC=user pass 5 0 1
#CC=user pass 5 0 1 { 0:0:1 }
#CC=user pass 5 0 1 { 0:0:1 } userip
# | | | | | | | | | |______ user ip (optional)
# | | | | | | | | |____________ max down hops (optional)
# | | | | | | | |______________ without use (optional)
# | | | | | | |________________ without use (optional)
# | | | | | |____________________ 0=au disabled for this user 1=au enabled for this user (optional)
# | | | | |______________________ without use (optional)
# | | | |________________________ gets all our shares at max 5 hops from us (optional)
# | | |___________________________ password
# | |________________________________ user
# |____________________________________ cccam client


#CC=dummy dummy 3 0 0 { 0:0:1 } 192.168.0.154


[/OCULTAR]

CCcam.cfg

[OCULTAR]######################################################################
# CONFIGURACION #
######################################################################


SERVER LISTEN PORT :
ALLOW WEBINFO: yes
WEBINFO USERNAME :
WEBINFO PASSWORD :
TELNETINFO LISTEN PORT :
WEBINFO LISTEN PORT :
ZAP OSD TIME : 0
OSD USERNAME :
OSD PASSWORD :
OSD PORT : 80
SHOW TIMING : yes
MINI OSD : yes
DEBUG : no
NEWCAMD CONF :no
DISABLE EMM : no
EXTRA EMM LEVEL : yes
#MINIMUM DOWNHOPS : 1
#SOFTKEY FILE : /usr/keys/SoftCam.Key
#AUTOROLL FILE : /usr/keys/AutoRoll.Key
#STATIC CW FILE : /usr/keys/constant.cw
CAID PRIO FILE : /etc/CCcam.prio
PROVIDERINFO FILE : /etc/CCcam.providers
CHANNELINFO FILE : /etc/CCcam.channelinfo
#LOG WARNINGS : /tmp/warnings.txt
#DVB API: -1


######################################################################
# ENLACES DE NEWCS Y MBOX #
######################################################################
N: 127.0.0.1 50001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 #SBOX


######################################################################
## CLIENTES ##
## AQUI PONEMOS LAS LINEAS F ##
######################################################################
F: dummy dummy 2 0 1 { 0:0:2 } #actualiza card


######################################################################
## SERVIDOR ##
## AQUI PONEMOS LAS LINEAS C ##
######################################################################

[/OCULTAR]
 
pero tienes lo mas importante como te han dicho para hacerlo funcionar??los datos de la blanca, la rsa y boxkey de la card??saludos
 
Última edición:
Si si eso lo tengo
 
sbox asin lo tengo
NC=maco malo slot0 1 300 0.0.0.0
esto para mi blanca solo asin nadamas metido luego meto las n que quiero dar
 
[main]
server_only=0 # 0=mixed mode 1=only server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
logudp=192.168.1.47:3354 # server ip:server port
userspath=/usr/bin/users.sbox # users list
channelinfo=/usr/bin/sbox.channelinfo # channel info
webinterface=1 # 1=web interface on 0=web interface off
webadmin=root:loco99 # user:pass for webinterface
webport=81 # web interface port
radegast=0:16050 # 0=radegast server off - 1=radegast server on : radegast server port
use_nagra=1 # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)
prio=1800:0000;0100:1111:2222 # prio caid for dvbapi, caid1:prov1;caid2:prov2:prov1
cccam=0:18000 # 0=cccam server off - 1=cccam server on : cccam server port
betatunnel=1 # 0=betatunnel support disabled 1=betatunnel support enabled
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=28000 # newcamd port
mhz=318 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader, 3=omnikey pcsc reader
cache=20 # how many ecms can be cached, 0 or less=cache disabled
 
#Nagra2/3 Example
[xxxxxxx] # nagra2 camid (4 bytes)
rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxgppkeypubbeta= # alternative method
gppkeypub= # alternative method
boxkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/usr/keys/50001.list # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
 
sbox asin lo tengo
NC=maco malo slot0 1 300 0.0.0.0
esto para mi blanca solo asin nadamas metido luego meto las n que quiero dar

Esa es la configuración, no?
Y luego para enlazarlo con ''CCcam'' se hace a traves de la ''N'', ¿no?
¿Y los usuarios que se crean en sbox o en cccam.cfg?
¿Lo que he leído también que me puede salir en hop 1 en vez de hop 0?
Como veis son muchas las dudas que me pasan por la cabeza. ¡Un Saludo!
 
SERVER LISTEN PORT : 15450
ALLOW WEBINFO: yes
WEBINFO USERNAME : root
WEBINFO PASSWORD : paco
TELNETINFO LISTEN PORT :
WEBINFO LISTEN PORT : 28700
ZAP OSD TIME : 0
OSD USERNAME :
OSD PASSWORD :
OSD PORT : 80
SHOW TIMING : no
MINI OSD : no
DEBUG : no
#NEWCAMD CONF : yes
#SERIAL READER : /dev/tts/0
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
#LOG WARNINGS : /tmp/warnings.txt
#DVB API: -1
###################################################################################
# L I N E A S D E C C C a m 192.168.2.108 #
###################################################################################
N: 192.168.1.48 28000 maco malo 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 #NEWCS llo aqui pongo la ip del deco i el paswuer que cree
 
Última edición:
si llo latengo asin i mefunciona bien
 
¿Asi tienes sbox como lector y cccam como servidor?
 
yo tengo un vu+solo sera lo mismo en todos esa comfiguracion es lamia i meva demara billa
 
si eso
sbox i cccam juntas como dices
 
atribustos a 755 acuerdate
 
Muy bien amigo, probare y te comento, muchas gracias por tu ayuda tio. ¡Un Saludo! :66:
 
si enlazas sbox con cccam con una N, deberás poner "server_only=1". abrir los puertos (según el post "port=50001 # newcamd port") en el router con la ip del deco y tambíen el de cccam.cfg "server listen port:".
además en cccam.cfg en la "N" quita esta ip
"127.0.0.1" y pon la de tu deco (la local que será 192.168.......) y pon "NEWCAMD CONF :yes"

con eso debería funcionarte sbox+cccam

saludos
 
Atrás
Arriba