Javilonas
Trovador Loco
Developer
- Registrado
- 10 Sep 2006
- Mensajes
- 25.306
- Reacciones
- 2.689
- Puntos
- 322
Pues yo me he cargado mi Quad y la verdad es que no tengo ni pajotera idea de que puede haber pasado
Follow along with the video below to see how to install our site as a web app on your home screen.
Nota: This feature may not be available in some browsers.
Hola Invitado, nos gustaría recordarte que mantener este sitio en línea conlleva unos gastos mensuales y anuales.
Sin vuestra ayuda mensual no es posible seguir en pie, no hay mucho más que contar.
Si quieres colaborar para que sea posible por lo menos seguir en pie como comunidad, puedes hacerlo mediante alguno de los métodos disponibles en esta página: https://www.lonasdigital.com/donaciones/
Recuerda que si necesitas invitación para acceder al foro, puedes solicitarla en nuestro Grupo de Telegram
Pues yo me he cargado mi Quad y la verdad es que no tengo ni pajotera idea de que puede haber pasado
No jodas? Pero a que te refieres con cargado? Podras recuperlo, no?
B03B6054
CZ#@
BCM97356B2 CFE v3.27, CFE core v3.28, Endian Mode: Little
Build Date: Thu Feb 14 00:00:00 KST 2013 (michael@gigablue)
Copyright (C) Broadcom Corporation.
Enabling NAND flash at CS1.
NAND_ID_1 = 0xecdc1095
NAND_ID_2 = 0x54ececdc
Total memory(0): 1024MB
DDR Freq: 800 MHz
DDR Mode: DDR3
DEV TECH: 2GBIT
DDR Width: 32
Boot Device: SPI
Total flash: 4MB
Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
Saving shmoo values...
Saved shmoo values....
CFE initialized.
Starting splash screen.
USB: New device connected to bus 2 hub 1 port 1
USB: Resetting device on bus 2 hub 1 port 1
USB: Locating Class 08 Vendor 0951 Product 1643: Mass-Storage Device
USBMASS: Unit 0 connected
*** Kingston DataTraveler G3 (8020 MB, lbs=512) ***
*** burn.bat: File found
Failed.: File not found
Loader:raw Filesys:fat Dev:usbdisk0 File:burn.bat Options:(null)
Loading: .. 276 bytes read
Programming flash...done
Reading usbdisk0:gigablue/quad/kernel.bin: Done. 4071988 bytes read
invalid sector
Reading usbdisk0:gigablue/quad/rootfs.bin:
CFE initialized.
Starting splash screen.
USB: New device connected to bus 2 hub 1 port 1
USB: Resetting device on bus 2 hub 1 port 1
USB: Locating Class 08 Vendor 0951 Product 1643: Mass-Storage Device
USBMASS: Unit 0 connected
*** Kingston DataTraveler G3 (8020 MB, lbs=512) ***
*** burn.bat: File found
Failed.: File not found
Loader:raw Filesys:fat Dev:usbdisk0 File:burn.bat Options:(null)
Loading: .. 276 bytes read
Programming flash...done
Reading usbdisk0:gigablue/quad/kernel.bin: Done. 4071988 bytes read
invalid sector
Reading usbdisk0:gigablue/quad/rootfs.bin:
Haz como ice yo con el VU+UNO ace un rato cuando se me escoño.
Flashea una OFI actualizada y luego metele la tuya.
http://image.openmips.com/4.0/gbquad/openmips-4.0-gbquad-20140413_usb.zip
root@gbquad:/hdd/images# ofgwrite -r -k imagetoflash
ofgwrite Utility v1.9.1
Author: Betacentauri
Based upon: mtd-utils-native-1.4.9
Use at your own risk! Make always a backup before use!
Don't use it if you use multiple ubi volumes in ubi layer!
Flashing rootfs
Flashing kernel
Searching image files in imagetoflash
Found rootfs file: imagetoflash/rootfs.bin
Found kernel file: imagetoflash/kernel.bin
Found /proc/mtd entries:
Device: Size: Erasesize: Name: Image:
mtd0: 1f800000 00020000 "rootfs" -> imagetoflash/rootfs.bin
mtd1: 1f800000 00020000 "rootfs(redundant)"
mtd2: 00400000 00020000 "kernel" -> imagetoflash/kernel.bin
mtd3: 00400000 00010000 "spi0.0"
mtd4: 00002000 00002000 "physmap-flash.0"
mtd5: 1e1d5000 0001f000 "rootfs"
Using kernel mtd device: /dev/mtd2
Using rootfs mtd device: /dev/mtd0
Found UBIFS
Found NAND flash
Erasing kernel: flash_erase /dev/mtd2 0 0
Erasing 128 Kibyte @ 3e0000 -- 100 % complete
Flashing kernel: nandwrite -pm /dev/mtd2 imagetoflash/kernel.bin
Writing data to block 0 at offset 0x0
Writing data to block 1 at offset 0x20000
Writing data to block 2 at offset 0x40000
Writing data to block 3 at offset 0x60000
Writing data to block 4 at offset 0x80000
Writing data to block 5 at offset 0xa0000
Writing data to block 6 at offset 0xc0000
Writing data to block 7 at offset 0xe0000
Writing data to block 8 at offset 0x100000
Writing data to block 9 at offset 0x120000
Writing data to block 10 at offset 0x140000
Writing data to block 11 at offset 0x160000
Writing data to block 12 at offset 0x180000
Writing data to block 13 at offset 0x1a0000
Writing data to block 14 at offset 0x1c0000
Writing data to block 15 at offset 0x1e0000
Writing data to block 16 at offset 0x200000
Writing data to block 17 at offset 0x220000
Writing data to block 18 at offset 0x240000
Writing data to block 19 at offset 0x260000
Writing data to block 20 at offset 0x280000
Writing data to block 21 at offset 0x2a0000
Writing data to block 22 at offset 0x2c0000
Writing data to block 23 at offset 0x2e0000
Writing data to block 24 at offset 0x300000
Writing data to block 25 at offset 0x320000
Writing data to block 26 at offset 0x340000
Writing data to block 27 at offset 0x360000
Writing data to block 28 at offset 0x380000
Writing data to block 29 at offset 0x3a0000
Writing data to block 30 at offset 0x3c0000
Writing data to block 31 at offset 0x3e0000
Switching to user mode 2
sh: /etc/init.d/softcam: No such file or directory
killall: CCcam: no process killed
killall: hddtemp: no process killed
killall: transmission-daemon: no process killed
Syncing filesystem
Remounting rootfs read-only
Found NAND flash
Flashing rootfs: ubiformat /dev/mtd0 -f imagetoflash/rootfs.bin
ubiformat: mtd0 (nand), size 528482304 bytes (504.0 MiB), 4032 eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes
libscan: scanning eraseblock 4031 -- 100 % complete
ubiformat: 4023 eraseblocks have valid erase counter, mean value is 1
ubiformat: 9 bad eraseblocks found, numbers: 156, 157, 158, 159, 267, 1262, 3063, 3213, 3701
ubiformat: flashing eraseblock 680 -- 100 % complete
ubiformat: formatting eraseblock 4031 -- 100 % complete Format end
Successfully flashed rootfs! Rebooting in 3 seconds...
Arreglado!!! ole, ole, ole!! cuando os diga cómo lo vais a flipar jajaja, voy a ir flasheándolo de nuevo y a prepararlo todo como estaba y ahora os cuento.
gbquad login: root
root@gbquad:~# cd /hdd/images
root@gbquad:/hdd/images# ofgwrite -r -k imagetoflash
ofgwrite Utility v1.9.1
Author: Betacentauri
Based upon: mtd-utils-native-1.4.9
Use at your own risk! Make always a backup before use!
Don't use it if you use multiple ubi volumes in ubi layer!
Flashing rootfs
Flashing kernel
Searching image files in imagetoflash
Found rootfs file: imagetoflash/rootfs.bin
Found kernel file: imagetoflash/kernel.bin
Found /proc/mtd entries:
Device: Size: Erasesize: Name: Image:
mtd0: 1f800000 00020000 "rootfs" -> imagetoflash/rootfs.bin
mtd1: 1f800000 00020000 "rootfs(redundant)"
mtd2: 00400000 00020000 "kernel" -> imagetoflash/kernel.bin
mtd3: 00400000 00010000 "spi0.0"
mtd4: 00002000 00002000 "physmap-flash.0"
mtd5: 1e1d5000 0001f000 "rootfs"
Using kernel mtd device: /dev/mtd2
Using rootfs mtd device: /dev/mtd0
Found UBIFS
Found NAND flash
Erasing kernel: flash_erase /dev/mtd2 0 0
Erasing 128 Kibyte @ 3e0000 -- 100 % complete
Flashing kernel: nandwrite -pm /dev/mtd2 imagetoflash/kernel.bin
Writing data to block 0 at offset 0x0
Writing data to block 1 at offset 0x20000
Writing data to block 2 at offset 0x40000
Writing data to block 3 at offset 0x60000
Writing data to block 4 at offset 0x80000
Writing data to block 5 at offset 0xa0000
Writing data to block 6 at offset 0xc0000
Writing data to block 7 at offset 0xe0000
Writing data to block 8 at offset 0x100000
Writing data to block 9 at offset 0x120000
Writing data to block 10 at offset 0x140000
Writing data to block 11 at offset 0x160000
Writing data to block 12 at offset 0x180000
Writing data to block 13 at offset 0x1a0000
Writing data to block 14 at offset 0x1c0000
Writing data to block 15 at offset 0x1e0000
Writing data to block 16 at offset 0x200000
Writing data to block 17 at offset 0x220000
Writing data to block 18 at offset 0x240000
Writing data to block 19 at offset 0x260000
Writing data to block 20 at offset 0x280000
Writing data to block 21 at offset 0x2a0000
Writing data to block 22 at offset 0x2c0000
Writing data to block 23 at offset 0x2e0000
Writing data to block 24 at offset 0x300000
Writing data to block 25 at offset 0x320000
Writing data to block 26 at offset 0x340000
Writing data to block 27 at offset 0x360000
Writing data to block 28 at offset 0x380000
Writing data to block 29 at offset 0x3a0000
Writing data to block 30 at offset 0x3c0000
Writing data to block 31 at offset 0x3e0000
Switching to user mode 2
sh: /etc/init.d/softcam: No such file or directory
killall: CCcam: no process killed
killall: hddtemp: no process killed
killall: transmission-daemon: no process killed
Syncing filesystem
Remounting rootfs read-only
Found NAND flash
Flashing rootfs: ubiformat /dev/mtd0 -f imagetoflash/rootfs.bin
ubiformat: mtd0 (nand), size 528482304 bytes (504.0 MiB), 4032 eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes
libscan: scanning eraseblock 4031 -- 100 % complete
ubiformat: 4023 eraseblocks have valid erase counter, mean value is 5
ubiformat: 9 bad eraseblocks found, numbers: 156, 157, 158, 159, 267, 1262, 3063, 3213, 3701
ubiformat: flashing eraseblock 680 -- 100 % complete
ubiformat: formatting eraseblock 4031 -- 100 % complete Format end
Successfully flashed rootfs! Rebooting in 3 seconds...