[main]server_only=0 # 0=mixed mode 1=only server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
logudp=192.168.1.11:3354 # server ip:server port
userspath=/usr/bin/users.sbox # users list
channelinfo=/usr/bin/sbox.channelinfo # channel info
webinterface=1 # 1=web interface on 0=web interface off
webadmin=root:ldteam # user:pass for webinterface
webport=8181 # web interface port
radegast=0:16050 # 0=radegast server off - 1=radegast server on : radegast server port
use_nagra=1 # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)
prio=1800:0000;0100:1111:2222 # prio caid for dvbapi, caid1:prov1;caid2:prov2:prov1
cccam=0:18000 # 0=cccam server off - 1=cccam server on : cccam server port
betatunnel=1 # 0=betatunnel support disabled 1=betatunnel support enabled
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=50001 # newcamd port
mhz=368 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader, 3=omnikey pcsc reader
cache=17 # how many ecms can be cached, 0 or less=cache disabled
# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!
#Nagra2/3 Example
[] # nagra2 camid (4 bytes)
rsa= # rsa "n" from this card (like newcs)
gppkeypubbeta= # alternative method
gppkeypub= # alternative method
boxkey= # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/usr/keys/50001.list # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
#Nagra tiger/ncmed Example
[CCCCCCCC] # nagra camid (4 bytes)
emm=2 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
#Seca Example
[CCCCCCCC] # seca camid (4 bytes)
ok_view=0 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
#Viaccess Example
[CCCCCCCC] # via camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
aeskey= # aeskey used by nano d2, example: aeskey=01:AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA;09:BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
#Irdeto Example
[CCCCCCCC] # irdeto camid (4 bytes)
camkey=0000000000000000 # CamKEY
camkeydata=00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
#NDS Example
[CCCCCCCC] # nds camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
boxid= # if sbox can't get boxid from card, add here manually
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
#Conax Example
[CCCCCCCC] # conax camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
rsa= # rsa ecm used on paired cards
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid