G
gatuso2000
Amigo de Lonas
- Registrado
- 2 Sep 2011
- Mensajes
- 33
- Reacciones
- 0
- Puntos
- 9
tengo un problemilla, con cortes en las lineas F e igualmente las lineas CC= son cortes intermitentes de 5 seg, cada 40 minutos o asi, con la ultima imagen del gigablue, aver que te parece tengo instalada la openld 1.7 utilizo sbox para leer la card y para compartir tambien, son lineas CC= es decir cccam desde sbox, he probado a dar las lineas desde cccam lineas F y el problema persiste en esas lineas. tengo card blanca, linea adls 5mb de bajada 1mb de subida un ping de 18ms, y miconfiguracion del sbox es la siguiente
or si alguien ve algo extraño, o me puede echar un capote,
[main]
server_only=0 # 0=mixed mode 1=only server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
logudp=192.168.1.11:3354 # server ip:server port
userspath=/usr/bin/users.sbox # users list
channelinfo=/usr/bin/sbox.channelinfo # channel info
webinterface=1 # 1=web interface on 0=web interface off
webadmin=x:x # userass for webinterface
webport=8181 # web interface port
radegast=0:16050 # 0=radegast server off - 1=radegast server on : radegast server port
use_nagra=1 # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)
prio=1800:0000;0100:1111:2222 # prio caid for dvbapi, caid1rov1;caid2rov2rov1
cccam=1:13000 # 0=cccam server off - 1=cccam server on : cccam server port
betatunnel=1 # 0=betatunnel support disabled 1=betatunnel support enabled
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=50001 # newcamd port
mhz=368 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader, 3=omnikey pcsc reader
cache=17 # how many ecms can be cached, 0 or less=cache disabled
# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!
#Nagra2/3 Example
[1BD85377] # nagra2 camid (4 bytes)1AA25C35 - 046716197595
rsa=xx
gppkeypubbeta= # alternative method
gppkeypub= # alternative method
boxkey=xx # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/usr/keys/50001.list # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
or si alguien ve algo extraño, o me puede echar un capote,[main]
server_only=0 # 0=mixed mode 1=only server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
logudp=192.168.1.11:3354 # server ip:server port
userspath=/usr/bin/users.sbox # users list
channelinfo=/usr/bin/sbox.channelinfo # channel info
webinterface=1 # 1=web interface on 0=web interface off
webadmin=x:x # user
ass for webinterfacewebport=8181 # web interface port
radegast=0:16050 # 0=radegast server off - 1=radegast server on : radegast server port
use_nagra=1 # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)
prio=1800:0000;0100:1111:2222 # prio caid for dvbapi, caid1
rov1;caid2rov2rov1cccam=1:13000 # 0=cccam server off - 1=cccam server on : cccam server port
betatunnel=1 # 0=betatunnel support disabled 1=betatunnel support enabled
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=50001 # newcamd port
mhz=368 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader, 3=omnikey pcsc reader
cache=17 # how many ecms can be cached, 0 or less=cache disabled
# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!
#Nagra2/3 Example
[1BD85377] # nagra2 camid (4 bytes)1AA25C35 - 046716197595
rsa=xx
gppkeypubbeta= # alternative method
gppkeypub= # alternative method
boxkey=xx # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/usr/keys/50001.list # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
