Bueno, probare con el iplus a ver si veo lo contratado o es problema de la parabolica.
Igualmente, en mi otra casa si tendria que verlo, no?
Os paso mi configuración a ver si le veis algo.
CCCAM.cfg
######################################################################
# CONFIGURACION #
######################################################################
SERVER LISTEN PORT : 12000
ALLOW WEBINFO : yes
WEBINFO USERNAME : root
WEBINFO PASSWORD : xxxx
TELNETINFO LISTEN PORT : 40000
WEBINFO LISTEN PORT : 40001
ZAP OSD TIME : 0
OSD USERNAME : root
OSD PASSWORD : xxxx
OSD PORT : 80
SHOW TIMING : yes
MINI OSD : yes
DEBUG : no
NEWCAMD CONF :no
DISABLE EMM : no
EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
#MINIMUM DOWNHOPS : 1
#SOFTKEY FILE : /usr/keys/SoftCam.Key
#AUTOROLL FILE : /usr/keys/AutoRoll.Key
#STATIC CW FILE : /usr/keys/constant.cw
#CAID PRIO FILE : /etc/CCcam.prio
PROVIDERINFO FILE : /etc/CCcam.providers
CHANNELINFO FILE : /etc/CCcam.channelinfo
LOG WARNINGS : /tmp/warnings.txt
#DVB API: -1
######################################################################
# ENLACES DE NEWCS Y MBOX #
######################################################################
N: 192.168.1.73 50001 paco pepe 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 #SBOX
######################################################################
# ENLACES PARA ACTUALIZAR CARD #
######################################################################
F: paco pepe 2 0 1 { 0:0:2 }
F: sbox sboxpaco 2 0 0 { 0:0:2 }
######################################################################
## CLIENTES ##
## AQUI PONEMOS LAS LINEAS F ##
######################################################################
F:
######################################################################
## SERVIDOR ##
## AQUI PONEMOS LAS LINEAS C ##
######################################################################
C:
SBOX.CONF
[main]
server_only=0 # 0=mixed mode 1=only server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
logudp=192.168.1.11:3354 # server ip:server port
userspath=/usr/bin/users.sbox # users list
channelinfo=/usr/bin/sbox.channelinfo # channel info
webinterface=1 # 1=web interface on 0=web interface off
webadmin=root:xxxx # user
ass for webinterface
webport=8181 # web interface port
radegast=0:16050 # 0=radegast server off - 1=radegast server on : radegast server port
use_nagra=1 # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)
prio=1800:0000;0100:1111:2222 # prio caid for dvbapi, caid1
rov1;caid2
rov2
rov1
cccam=0:18000 # 0=cccam server off - 1=cccam server on : cccam server port
betatunnel=1 # 0=betatunnel support disabled 1=betatunnel support enabled
#autorestart= # if you want, sbox can auto-restart every day, example: autorestart=05:15
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=50001 # newcamd port
mhz=500 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader, 3=omnikey pcsc reader
cache=18 # how many ecms can be cached, 0 or less=cache disabled
#Nagra2/3 Example
[xxxxxxxxx] # nagra2 camid (4 bytes)
rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
gppkeypubbeta= # alternative method
gppkeypub= # alternative method
boxkey=xxxxxxxxxxxxxxxxxx
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/usr/keys/50001.list # path from port.list
controlsid=0:0 # X:Y X=max sids allowed at same time, Y=seconds needed to allow new sid
USER.SBOX
#Example configuration file for sbox cardclient server
#Add newcamd user
#NC=dummy dummy slot0
#NC=dummy dummy slot0 0
#NC=dummy dummy slot0 0 150
#NC=dummy dummy slot0 0 150 ip
# | | | | | | |__________ user ip (optional)
# | | | | | |_____________ user timeout in sec min. 150 max. 1440 (optional)
# | | | | |________________ 0=au disabled for this user 1=au enabled for this user (optional)
# | | | |____________________ server to which this user belongs
# | | |__________________________ password for this user
# | |_______________________________ username
# |____________________________________ newcamd client
NC=paco pepe slot0 1
#NC=edk2 edk2 slot1 0
#Add radegast server
#RS=ip port caid provider
# | | | | |__________________ provider
# | | | |________________________ caid
# | | |______________________________ server port
# | |__________________________________ server ip
# |____________________________________ radegast server
#RS=127.0.0.1 16050 1800 000000
#Add newcamd server
#NS=ip port user pass deskey au
# | | | | | | |________ enable send emms, 0=send all 1=dont send emm-s 2=dont send emm-u 4=dont send emm-g
# | | | | | |______________ deskey
# | | | | |____________________ password
# | | | |_________________________ user
# | | |______________________________ server port
# | |__________________________________ server ip
# |____________________________________ newcamd server
#NS=127.0.0.1 15050 dummy dummy 0102030405060708091011121314 7
#Add cccam server
#CS=ip port user pass 3
# | | | | | |________________ max hops (min.1 max.6)
# | | | | |____________________ password
# | | | |_________________________ user
# | | |______________________________ server port
# | |__________________________________ server ip
# |____________________________________ cccam server
CS=192.168.1.73 12005 sbox sboxpaco 2
#CS=127.0.0.1 15050 dummy dummy 3
#Add cccam client
#CC=user pass
#CC=user pass 5 0 1
#CC=user pass 5 0 1 { 0:0:1 }
#CC=user pass 5 0 1 { 0:0:1 } userip
# | | | | | | | | | |______ user ip (optional)
# | | | | | | | | |____________ max down hops (optional)
# | | | | | | | |______________ without use (optional)
# | | | | | | |________________ without use (optional)
# | | | | | |____________________ 0=au disabled for this user 1=au enabled for this user (optional)
# | | | | |______________________ without use (optional)
# | | | |________________________ gets all our shares at max 5 hops from us (optional)
# | | |___________________________ password
# | |________________________________ user
# |____________________________________ cccam client
#CC=dummy dummy 3 0 0 { 0:0:1 } 192.168.0.154
Puede que se junten dos ploblemas, el deco o antena y configuración.
Imagen blackhole 1.7 mod lonas, blanca en slot0, gris en slot1
cam activa sbox+cccam
En CCcaminfophp en cards no me sale las cards que tengo puestas