• Hola Invitado, nos gustaría recordarte que mantener este sitio en línea conlleva unos gastos mensuales y anuales.

    Sin vuestra ayuda mensual no es posible seguir en pie, no hay mucho más que contar.

    Si quieres colaborar para que sea posible por lo menos seguir en pie como comunidad, puedes hacerlo mediante alguno de los métodos disponibles en esta página: https://www.lonasdigital.com/donaciones/

    Recuerda que si necesitas invitación para acceder al foro, puedes solicitarla en nuestro Grupo de Telegram


Duda flash memory

F

franory

Amigo de Lonas
Registrado
21 Sep 2012
Mensajes
90
Reacciones
0
Puntos
9
Buenas tardes,
viendo en mi UE plus con la LD1.8 en el apartado de información, me dice de memoria flasH.
Ocupado 92
Libre 34

¿Es normal? Yo creí que este cacharro llevaba 256 de flash.

Muchas gracias!!!
 
Eso tiene que estar mal, o alguna cosa rara tienes!
 
Pues sí... Porque el otro día viendo el de un amigo, le ponía 130 megas libres. Y es lo que me ha hecho sospechar.

Alguna idea? Después de verlo hice una reinstalación limpia del fw.

s2
 
Yo tengo 145 libres, si que es raro si y con el deco limpio te da solo eso? a ver si no esta bien limpio.
 
entra por consola terminal y pon:

Código:
cat /proc/meminfo

y comprueba que memoria total te sale y cual libre.
 
Pues me sale:
Código:
MemTotal:         227344 kB
MemFree:          148884 kB
MemAvailable:     161700 kB
Buffers:            1944 kB
Cached:            29640 kB
SwapCached:            0 kB
Active:            21728 kB
Inactive:          27504 kB
Active(anon):      17688 kB
Inactive(anon):       68 kB
Active(file):       4040 kB
Inactive(file):    27436 kB
Unevictable:           0 kB
Mlocked:               0 kB
SwapTotal:        524284 kB
SwapFree:         524284 kB
Dirty:                 4 kB
Writeback:             0 kB
AnonPages:         17648 kB
Mapped:             9708 kB
Shmem:               112 kB
Slab:              10164 kB
SReclaimable:       3640 kB
SUnreclaim:         6524 kB
KernelStack:         584 kB
PageTables:          360 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:      637956 kB
Committed_AS:      40136 kB
VmallocTotal:    1034164 kB
VmallocUsed:      213816 kB
VmallocChunk:     807456 kB

que la verdad es que no tengo claro lo que significa ni si es compatible con lo que me da el deco en el menú de información --> memoria que aquí pego.

IMG_20141221_202737.jpg


A lo que preguntaba el compañero, sí, con todo limpio, deco recién instalado y meterle las emus....

Muchas gracias!!

s2
 
Pues no te cuadra una informacion con la otra, yo creo que es mas fiable la de la consola terminal y segun eso esta bien.
 
lo tienes bien moñas, por consola terminal te marca el total de la ram que tienes y es correcto.


cat /proc/meminfo

lo que te marca la flash es este comando:

Código:
df -mh / | grep -v '^Filesystem'

que lo que marca es el espacio utilizado por el filesystem o sea por el sistema de archivos de la imagen.

Por lo que eso es correcto.

asi que no tienes nada mal.
 
Eso me da:
Código:
ubi0:rootfs              94.0M     61.2M     32.8M  65% /

Estoy seguro que a mi colega le vei en ese número 130 megas y no 32... de hecho me sorprendió bastante.... De hecho MiguelCBC dice que tiene 145... Me parece raro lo mío...
gracias!
s2
 
es correcto, una cosa es el tamaño entero de la flash que como viste te da correcto.

y otra cosa es el tamaño utilizado por el sistema de archivos de la imagen.

ten en cuenta si tu amigo tiene el mismo deco que tu.

Pero ya te digo que ese valor es correcto, lo que indica no es el tamaño de la flash, si no el tamaño del sistema de archivos.

deco vu+zero:

root@vuzero:/proc# cat meminfo
MemTotal: 315524 kB
MemFree: 169324 kB

root@vuzero:/# df -mh / | grep -v '^Filesystem'
ubi0:rootfs 193.0M 96.2M 96.8M 50% /

ya te digo que lo tienes correcto, y varia segun el deco que tengas, en este caso mio blackhole con vu+zero.

asi que no te preocupes que es normal.
 
Última edición:
Ok... No es que no confíe... Pero Miguelcbc tu tienes el ueplus también? Puedes ejecutar el mismo comando a ver que te sale?

Lucifer. Yo creo q el vu+ zero también tiene 256 de flash. No debería tener yo un numero parecido al tuyo?

Gracias lucifer
 
Perdona, no te habia leido pero lo tienes todo bien como dice lucifer, te indeca mal a traves del deco pero por dentro esta bien, no tengo ni idea el porque te marca mal por el deco, eston son mis datos.

1_0_1_1131_404_1_C00000_0_0_0.jpg
 
si acabo de instalar la 1.8 en mi ueplus:

t17.jpg


Si no te da bien, o sea te monta en menor tamaño el ubis.roofts.

¿ Una pregunta sabes si tienes instalado el ultimo bootloader de gigablue para el ueplus?
 
lo tenemos igual, una cosa, ya que estas metido en esta imagen, mira el canal plus radios que es en abierto a ver si te se oye el audi 3 o 4 creo que es que son los 40 principales, a mi no me va, pero con el qviart si, en cambio en los canales por ejemplo de futbol ayer si se oia el audio 2 con el carrusel deportivo, pero en canal plus radios nada.
 
1º Saber si tienes instalado el ultimo bootloader.

2º Tendrias que conectarte deco-pc a traves del rs232 y ver como se realiza el montaje y ver de camino que bootloader tienes, este es de mi ueplus con imagen opeld 1.8, el log:

Código:
WRDM W0 00000012                                                                
WRDM W0 00000013                                                                
                                                                                
                                                                                
ADDR                                                                            
                                                                                
    0000000000111111111122222222223333333333444444444455555555556666            
    0123456789012345678901234567890123456789012345678901234567890123            
 00 +++++++++++++++++++++X++++++++S+++++++++++++++++++++++++--------            
                                                                                
0000001B =>00000015                                                             
CZS#!@#@                                                                        
                                                                                
BCM97358A1 CFE v3.20, Endian Mode: Little                                       
Build Date: Thu Jul 17 00:00:00 CEST 2014 (root@gb800ueplus)                    
Copyright (C) Broadcom Corporation.                                             
                                                                                
                                                                                
CPU speed:            751MHz                                                    
DDR Frequency:        796 MHz                                                   
DDR Mode:             DDR3                                                      
Total memory(MEMC 0): 512MB                                                     
MEMC 0 DDR Width:     16                                                        
Boot Device:          NAND                                                      
Total flash:          256MB                                                     
RTS VERSION:          Initial RTS Version                                       
ETH0_PHY:             INT                                                       
ETH0_MDIO_MODE:       1                                                         
ETH0_SPEED:           100                                                       
ETH0_PHYADDR:         1                                                         
                                                                                
Initializing USB.                                                               
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub                   
                                                                                
CFE initialized.                                                                
USB: Device disconnected from bus 0 hub 1 port 1                                
USB: New device connected to bus 0 hub 1 port 1                                 
USB: Resetting device on bus 0 hub 1 port 1                                     
USB: Locating Class FF Vendor 048D Product 9006: Driver not found.              
USB device matching <USB Disk> not found!                                       
Starting splash screen.                                                         
Found splash image - Width = 720 Height = 576                                   
Non Interlaced Replace list 0ebe47b0 0f000000Interlaced Replace list 0ebe52f0 00
Reading flash0.lcdsplash: No valid image found in flash0.lcdsplash - disabling h
Failed: Error                                                                   
                                                                                
Loader:elf Filesys:raw Dev:flash0.kernel File: Options:(null)                   
Loading: 0x80001000/8194052 0x807d1804/170572 Entry address is 0x80619030       
Starting program at 0x80619030                                                  
                                                                                
Linux version 3.14.2 (lonas@lonas-linux) (gcc version 4.9.1 (GCC) ) #1 Sat Oct 4
Fetching vars from bootloader... found 15 vars.                                 
Options: moca=0 sata=0 pcie=0 usb=1                                             
Using 512 MB + 0 MB RAM (from CFE)                                              
MEMC0 split: 256 MB -> Linux; 256 MB -> extra bmem                              
bootconsole [early0] enabled                                                    
CPU0 revision is: 00029032 (Broadcom BMIPS3300)                                 
Determined physical RAM map:                                                    
 memory: 10000000 @ 00000000 (usable)                                           
bmem: adding 24 MB RESERVED region at 232 MB (0x01800000@0x0e800000)            
Zone ranges:                                                                    
  Normal   [mem 0x00000000-0x0fffffff]                                          
Movable zone start for each node                                                
Early memory node ranges                                                        
  node   0: [mem 0x00000000-0x0fffffff]                                         
Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.                 
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes          
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024      
Kernel command line: bmem=24M bmem=256M@512M ubi.mtd=rootfs root=ubi0:rootfs ro8
PID hash table entries: 1024 (order: 0, 4096 bytes)                             
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)                 
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)                   
Memory: 227100K/262144K available (6275K kernel code, 349K rwdata, 1180K rodata)
NR_IRQS:160                                                                     
Measuring MIPS counter frequency...                                             
Detected MIPS clock frequency: 751 MHz (375.748 MHz counter)                    
Console: colour dummy device 80x25                                              
Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)                          
pid_max: default: 32768 minimum: 301                                            
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)                     
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)                
devtmpfs: initialized                                                           
bmem: adding extra 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)     
NET: Registered protocol family 16                                              
USB0: power enable is active high; overcurrent is active low                    
bio: create slab <bio-0> at 0                                                   
SCSI subsystem initialized                                                      
usbcore: registered new interface driver usbfs                                  
usbcore: registered new interface driver hub                                    
usbcore: registered new device driver usb                                       
Linux video capture interface: v2.00                                            
Advanced Linux Sound Architecture Driver Initialized.                           
Bluetooth: Core ver 2.18                                                        
NET: Registered protocol family 31                                              
Bluetooth: HCI device and connection manager initialized                        
Bluetooth: HCI socket layer initialized                                         
Bluetooth: L2CAP socket layer initialized                                       
Bluetooth: SCO socket layer initialized                                         
Switched to clocksource wktmr                                                   
FS-Cache: Loaded                                                                
cfg80211: Calling CRDA to update world regulatory domain                        
NET: Registered protocol family 2                                               
TCP established hash table entries: 2048 (order: 1, 8192 bytes)                 
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)                        
TCP: Hash tables configured (established 2048 bind 2048)                        
TCP: reno registered                                                            
UDP hash table entries: 256 (order: 0, 4096 bytes)                              
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)                         
NET: Registered protocol family 1                                               
RPC: Registered named UNIX socket transport module.                             
RPC: Registered udp transport module.                                           
RPC: Registered tcp transport module.                                           
RPC: Registered tcp NFSv4.1 backchannel transport module.                       
futex hash table entries: 256 (order: -1, 3072 bytes)                           
NFS: Registering the id_resolver key type                                       
Key type id_resolver registered                                                 
Key type id_legacy registered                                                   
nfs4filelayout_init: NFSv4 File Layout Driver Registering...                    
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).                        
fuse init (API version 7.22)                                                    
msgmni has been set to 443                                                      
io scheduler noop registered                                                    
io scheduler cfq registered (default)                                           
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled                        
serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 165A
console [ttyS0] enabled                                                         
console [ttyS0] enabled                                                         
bootconsole [early0] disabled                                                   
bootconsole [early0] disabled                                                   
serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 165A
serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 165A
loop: module loaded                                                             
brcmstb_nand: NAND controller driver is loaded                                  
bcmgenet: configuring instance #0 for internal PHY                              
bcmgenet bcmgenet.0 eth0: link down                                             
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver                      
ehci-brcm ehci-brcm.0: Broadcom STB EHCI                                        
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1            
ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300                                
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00                               
hub 1-0:1.0: USB hub found                                                      
hub 1-0:1.0: 2 ports detected                                                   
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver                          
ohci-brcm ohci-brcm.0: Broadcom STB OHCI                                        
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2            
ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400                                
hub 2-0:1.0: USB hub found                                                      
hub 2-0:1.0: 2 ports detected                                                   
usbcore: registered new interface driver usb-storage                            
mousedev: PS/2 mouse device common for all mice                                 
i2c /dev entries driver                                                         
IR NEC protocol handler initialized                                             
IR RC5(x) protocol handler initialized                                          
IR RC6 protocol handler initialized                                             
IR JVC protocol handler initialized                                             
IR Sony protocol handler initialized                                            
IR RC5 (streamzap) protocol handler initialized                                 
IR SANYO protocol handler initialized                                           
IR MCE Keyboard/mouse protocol handler initialized                              
usbcore: registered new interface driver btusb                                  
hidraw: raw HID events driver (C) Jiri Kosina                                   
usbcore: registered new interface driver usbhid                                 
usbhid: USB HID core driver                                                     
TCP: cubic registered                                                           
NET: Registered protocol family 17                                              
Bluetooth: HIDP (Human Interface Emulation) ver 1.2                             
Bluetooth: HIDP socket layer initialized                                        
Key type dns_resolver registered                                                
PM: CP0 COUNT/COMPARE frequency depends on divisor                              
EBI CS0: setting up NAND flash (primary)                                        
nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda                        
nand: AMD/Spansion S34ML02G1                                                    
nand: 256MiB, SLC, page size: 2048, OOB size: 64                                
nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda                        
nand: AMD/Spansion S34ML02G1                                                    
nand: 256MiB, SLC, page size: 2048, OOB size: 64                                
brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, HC
Bad block table found at page 131008, version 0x01                              
Bad block table found at page 130944, version 0x01                              
Creating 4 MTD partitions on "brcmnand.0":                                      
0x000000e00000-0x00000fc00000 : "rootfs"                                        
0x000000e00000-0x00000fc00000 : "rootfs(redundant)"                             
0x000000200000-0x000000900000 : "kernel"                                        
0x000000900000-0x000000a00000 : "mac"                                           
UBI: attaching mtd0 to ubi0                                                     
usb 1-1: new high-speed USB device number 2 using ehci-brcm                     
input: ITE Technologies, Inc. USB Deivce as /devices/platform/ehci-brcm.0/usb1/0
hid-generic 0003:048D:9006.0001: input,hidraw0: USB HID v1.01 Keyboard [ITE Tec1
random: nonblocking pool is initialized                                         
UBI: scanning is finished                                                       
UBI: attached mtd0 (name "rootfs", size 238 MiB) to ubi0                        
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes                   
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048                    
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096                  
UBI: good PEBs: 1904, bad PEBs: 0, corrupted PEBs: 0                            
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128               
UBI: max/mean erase counter: 18/9, WL threshold: 4096, image sequence number: 89
UBI: available PEBs: 0, total reserved PEBs: 1904, PEBs reserved for bad PEB ha0
ALSA device list:                                                               
  No soundcards found.                                                          
UBI: background thread "ubi_bgt0d" started, PID 45                              
UBIFS: background thread "ubifs_bgt0_0" started, PID 46                         
UBIFS: recovery needed                                                          
UBIFS: recovery completed                                                       
UBIFS: mounted UBI device 0, volume 0, name "rootfs"                            
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2s
UBIFS: FS size: 234778624 bytes (223 MiB, 1849 LEBs), journal size 9023488 byte)
UBIFS: reserved for root: 0 bytes (0 KiB)                                       
UBIFS: media format: w4/r0 (latest is w4/r0), UUID C9A9DBAA-8693-4850-B36D-CED5l
VFS: Mounted root (ubifs filesystem) on device 0:10.                            
devtmpfs: mounted                                                               
Freeing unused kernel memory: 244K (807a3000 - 807e0000)                        
Algorithmics/MIPS FPU Emulator v1.5                                             
INIT: version 2.88 booting                                                      
usbcore: registered new interface driver rtl8192cu                              
version: 20141019225038-14.2                                                    
LCD: ILI9226                                                                    
input: gigablue remote control as /devices/virtual/input/input1                 
DVB: registering new adapter (gbueplus)                                         
dvb dvb.0: DVB: registering adapter 0 frontend 0 (BCM7346 DVB-S2 NIM (internal).
boxmodel: module license 'proprietary' taints kernel.

si te fijas en el log que te he puesto esto indica que bootloader lleva el deco, en mi caso el ultimo:

Build Date: Thu Jul 17 00:00:00 CEST 2014 (root@gb800ueplus)

Luego habria que ver como realiza esto en tu deco, en mi log:

nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
nand: AMD/Spansion S34ML02G1
nand: 256MiB, SLC, page size: 2048, OOB size: 64
nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
nand: AMD/Spansion S34ML02G1
nand: 256MiB, SLC, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, HC
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
Creating 4 MTD partitions on "brcmnand.0":
0x000000e00000-0x00000fc00000 : "rootfs"
0x000000e00000-0x00000fc00000 : "rootfs(redundant)"
0x000000200000-0x000000900000 : "kernel"
0x000000900000-0x000000a00000 : "mac"
UBI: attaching mtd0 to ubi0
 
Ahí ya se complica. EN teroría sí que tengo el último bootloader. Lo puse antes de actualizar a la 1.6 o la 1.8.

No hay otra forma de verlo? En estos días no tengo un puerto rs232 disponible...

Y si gago df -mh completo me da:

root@gb800ueplus:~# df -mh
Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 94.0M 61.2M 32.8M 65% /
devtmpfs 110.9M 4.0K 110.9M 0% /dev
tmpfs 64.0K 0 64.0K 0% /media
tmpfs 111.0M 108.0K 110.9M 0% /var/volatile
/dev/sda1 915.2G 7.2G 861.4G 1% /media/hdd


Los 100 megas que me faltan no serán los que están en devtmpfs?

s2 y gracias de nuevo!!
 
no, en el mio:

Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 206.4M 67.4M 139.0M 33% /
devtmpfs 110.9M 4.0K 110.9M 0% /dev
tmpfs 64.0K 0 64.0K 0% /media
tmpfs 111.0M 332.0K 110.7M 0% /var/volatile

Lo que te ocurre es que cuando el bootloader del deco monta las memorias fisicas a ti no te monta el ubi0, que es el sistema de archivos de la imagen con toda la memoria disponible, por eso habria que ver mediante el log rs232 que es lo que hace y de camino ver que bootloader tienes, por que puede ser por el bootloader.

o si quieres introduce nuevamente el bootloader para el ueplus de aqui:

http://image.openmips.com/4.2/index.php?open=loader
 
No obstante por consola terminal ejecuta:

Código:
dmesg

y pega aqui lo que te salga.
 
Pues ahí va recién iniciado....

Lo único que veo que pueda tener que ver con estto es l9o que dice:

0x000000e00000-0x000007c00000 : "rootfs"
0x000000e00000-0x000007c00000 : "rootfs(redundant)"
0x000000200000-0x000000900000 : "kernel"
0x000000900000-0x000000a00000 : "mac"
UBI: attaching mtd0 to ubi0
UBI: scanning is finished
UBI: attached mtd0 (name "rootfs", size 110 MiB) to ubi0

Yo toda la extracción....

Código:
Detected MIPS clock frequency: 751 MHz (375.750 MHz counter)Console: colour dummy device 80x25
Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
devtmpfs: initialized
bmem: adding extra 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
NET: Registered protocol family 16
USB0: power enable is active high; overcurrent is active low
bio: create slab <bio-0> at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.18
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switched to clocksource wktmr
FS-Cache: Loaded
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
futex hash table entries: 256 (order: -1, 3072 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.22)
msgmni has been set to 443
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
console [ttyS0] enabled
bootconsole [early0] disabled
serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
loop: module loaded
brcmstb_nand: NAND controller driver is loaded
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
bcmgenet: configuring instance #0 for internal PHY
bcmgenet bcmgenet.0 eth0: link down
__clk_disable: enet [0]
bcm7552_pm_genet_disable 00
__clk_disable: network [0]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
__clk_enable: usb [1]
bcm7552_pm_usb_enable 00
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
usbcore: registered new interface driver btusb
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
PM: CP0 COUNT/COMPARE frequency depends on divisor
EBI CS0: setting up NAND flash (primary)
nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
nand: AMD/Spansion S34ML01G1
nand: 128MiB, SLC, page size: 2048, OOB size: 64
nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
nand: AMD/Spansion S34ML01G1
nand: 128MiB, SLC, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
Creating 4 MTD partitions on "brcmnand.0":
0x000000e00000-0x000007c00000 : "rootfs"
0x000000e00000-0x000007c00000 : "rootfs(redundant)"
0x000000200000-0x000000900000 : "kernel"
0x000000900000-0x000000a00000 : "mac"
UBI: attaching mtd0 to ubi0
UBI: scanning is finished
UBI: attached mtd0 (name "rootfs", size 110 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 880, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 22/9, WL threshold: 4096, image sequence number: 1704926973
UBI: available PEBs: 0, total reserved PEBs: 880, PEBs reserved for bad PEB handling: 20
ALSA device list:
  No soundcards found.
UBI: background thread "ubi_bgt0d" started, PID 45
UBIFS: background thread "ubifs_bgt0_0" started, PID 46
random: nonblocking pool is initialized
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 107294720 bytes (102 MiB, 845 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID C9A9DBAA-8693-4850-B36D-CED519564392, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 244K (807a3000 - 807e0000)
Algorithmics/MIPS FPU Emulator v1.5
usb 1-1: new high-speed USB device number 2 using ehci-brcm
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi0 : usb-storage 1-1:1.0
scsi 0:0:0:0: Direct-Access     TOSHIBA  External USB 3.0 0    PQ: 0 ANSI: 6
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
usbcore: registered new interface driver rtl8192cu
EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
version: 20141019225038-14.2
LCD: ILI9226
input: gigablue remote control as /devices/virtual/input/input0
DVB: registering new adapter (gbueplus)
dvb dvb.0: DVB: registering adapter 0 frontend 0 (BCM7346 DVB-S2 NIM (internal))...
dvb dvb.0: DVB: registering adapter 0 frontend 0 (GIGA DVB-C/T NIM (SI))...
boxmodel: module license 'proprietary' taints kernel.
Disabling lock debugging due to kernel taint
Adding 524284k swap on /media/hdd/swapfile.  Priority:-1 extents:9 across:565244k
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
bcmgenet bcmgenet.0 eth0: link up, 100 Mbps, full duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
out of order segment: rcv_next F04979F2 seq F0497A3E - F0497FDE
out of order segment: rcv_next F04979F2 seq F0497FDE - F0498548
out of order segment: rcv_next F04979F2 seq F0498548 - F04987B6
out of order segment: rcv_next F04979F2 seq F0498D4C - F04992EC
out of order segment: rcv_next F04979F2 seq F04992EC - F04992EE
ofo requeuing : rcv_next F0497A3E seq F0497A3E - F04987B6
ofo requeuing : rcv_next F0498D4C seq F0498D4C - F04992EE
out of order segment: rcv_next 849B4E80 seq 849B5420 - 849B59C0
out of order segment: rcv_next 849B4E80 seq 849B59C0 - 849B5BB9
ofo requeuing : rcv_next 849B5420 seq 849B5420 - 849B5BB9
out of order segment: rcv_next 3022968D seq 30229691 - 302296DD
out of order segment: rcv_next 3022968D seq 302296DD - 30229714
out of order segment: rcv_next 3022968D seq 30229714 - 30229C5D
out of order segment: rcv_next 3022968D seq 30229C5D - 3022A1FD
out of order segment: rcv_next 3022968D seq 3022A1FD - 3022A65E
out of order segment: rcv_next 3022968D seq 3022A65E - 3022ABFE
ofo requeuing : rcv_next 30229691 seq 30229691 - 3022ABFE
out of order segment: rcv_next 7B8D26AF seq 7B8D26DF - 7B8D26E7
out of order segment: rcv_next 7B8D26AF seq 7B8D26E7 - 7B8D2710
out of order segment: rcv_next 7B8D26AF seq 7B8D2718 - 7B8D2741
out of order segment: rcv_next 7B8D26AF seq 7B8D2741 - 7B8D2749
out of order segment: rcv_next 7B8D26AF seq 7B8D2772 - 7B8D277A
ofo requeuing : rcv_next 7B8D26DF seq 7B8D26DF - 7B8D2710
ofo requeuing : rcv_next 7B8D2718 seq 7B8D2718 - 7B8D2749
ofo requeuing : rcv_next 7B8D2772 seq 7B8D2772 - 7B8D277A
out of order segment: rcv_next 3022AF9D seq 3022AFA5 - 3022AFCE
out of order segment: rcv_next 3022AF9D seq 3022AFCE - 3022AFD6
out of order segment: rcv_next 3022AF9D seq 3022AFD6 - 3022AFFF
out of order segment: rcv_next 3022AF9D seq 3022AFFF - 3022B007
out of order segment: rcv_next 3022AF9D seq 3022B007 - 3022B030
ofo requeuing : rcv_next 3022AFA5 seq 3022AFA5 - 3022B030
out of order segment: rcv_next 7B8D287A seq 7B8D28B3 - 7B8D28E3
out of order segment: rcv_next 7B8D287A seq 7B8D28E3 - 7B8D28EB
out of order segment: rcv_next 7B8D287A seq 7B8D28EB - 7B8D2922
out of order segment: rcv_next 7B8D287A seq 7B8D2922 - 7B8D292A
ofo requeuing : rcv_next 7B8D28B3 seq 7B8D28B3 - 7B8D292A
out of order segment: rcv_next 7B8D2B3E seq 7B8D2B67 - 7B8D2C86
out of order segment: rcv_next 7B8D2B3E seq 7B8D2C86 - 7B8D2C8E
out of order segment: rcv_next 7B8D2B3E seq 7B8D2C8E - 7B8D2CB7
ofo requeuing : rcv_next 7B8D2B67 seq 7B8D2B67 - 7B8D2CB7

Y GRACIAS por la currada. Mientras voy a meter el bootloader de nuevo. Entiendo que luego no tengo que meter de neuvo la imagen...

s2
 
no es extrictamente necesario, pero en tu caso introducela.

Ahi cosas raras a ti te aparece que tienes 128 o sea la mitad, entiendo que si tienes un ueplus te deberia aparecer 256,

aqui lo puedes ver:

Código:
EBI CS0: setting up NAND flash (primary) nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1 nand: AMD/Spansion S34ML01G1 nand: 128MiB, SLC, page size: 2048, OOB size: 64 nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1 nand: AMD/Spansion S34ML01G1 nand: 128MiB, SLC, page size: 2048, OOB size: 64

Cuando lo normal es asi:

Código:
EBI CS0: setting up NAND flash (primary)
nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
nand: AMD/Spansion S34ML02G1
nand: 256MiB, SLC, page size: 2048, OOB size: 64
nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
nand: AMD/Spansion S34ML02G1
nand: 256MiB, SLC, page size: 2048, OOB size: 64


Pero lo mas raro del todo es:

tu tienes

AMD/Spansion S34ML01G1

cuando yo tengo

AMD/Spansion S34ML02G1


Por lo tanto no tienes la misma nand flash que la mia, una de dos o el boot lo tienes antiguo y no reconoce la expansion memory flash correcta del deco, o no tienes un ueplus, o te han metido en el deco la nand flash que no se corresponde.


Esto que provoca que cuando se crea la memoria mtd en el receptor al reconocerte 128 megas pues la memoria mtd0 donde van los archivos de la imagen ubi0 pues te la crea en esta posicion:


0x000000e00000-0x000007c00000

cuando lo normal en memorias de 256 es que te la cree en esta posicion:

0x000000e00000-0x00000fc00000

explicacion de esto si restas con una calculadora hexageximal tu memoria mtd0:

000000e00000-000007c00000=−6E00000

si lo pasas a decimal el resultado:

-115343360---> que serian unos 115 megas

en cambio lo normal en memorias de 256 seria como la mia:

000000e00000-00000fc00000=−EE00000

Pasado a decimal

−249561088 unos 249 megas

-----------------------------------------------------------------









EXPLICACION


Tu tienes un ueplus de los primeros que llevaban memoria nand flash 128 megas de ram.

Mas tarde sacaron ueplus con el doble de memoria 256 de ram

de ahi esto:

AMD/Spansion S34ML01G1

cuando yo tengo

AMD/Spansion S34ML02G1


ASI QUE MISTERIO RESUELTO
 
Última edición:

Temas similares

B
Respuestas
9
Visitas
433
esegarry
E
C
Respuestas
15
Visitas
852
Javilonas
Javilonas
S
Respuestas
13
Visitas
643
franxuky
F
J
Respuestas
11
Visitas
893
Guerrero7000
G
josepma1
Respuestas
5
Visitas
579
josepma1
josepma1
Atrás
Arriba