• Hola Invitado, nos gustaría recordarte que mantener este sitio en línea conlleva unos gastos mensuales y anuales.

    Sin vuestra ayuda mensual no es posible seguir en pie, no hay mucho más que contar.

    Si quieres colaborar para que sea posible por lo menos seguir en pie como comunidad, puedes hacerlo mediante alguno de los métodos disponibles en esta página: https://www.lonasdigital.com/donaciones/

    Recuerda que si necesitas invitación para acceder al foro, puedes solicitarla en nuestro Grupo de Telegram


NCam-5.2-r1 (Oficial)

Javilonas

Javilonas

Trovador Loco
Developer
Registrado
10 Sep 2006
Mensajes
25.305
Reacciones
2.688
Puntos
322
Aquí os dejo la versión de NCam 5.2-r1 (oficial), espero que sea todo de vuestro agrado.

Si estáis satisfechos con el trabajo, estaría genial una pequeña contribución:


PayPal: https://www.lonasdigital.com/donaciones


Adjunto el changelog:




Código:
#########################################################################
 OFFICIAL version
 NCam cardserver v5.2-r1, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
 Copyright (C) 2012 - 2020 developed by Javier Sayago (Javilonas).
 Visit https://www.lonasdigital.com/ for more details.
 Source Code: https://github.com/javilonas/NCam


#########################################################################


Compiled:


ncam.mips                          Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc                   Enigma2 - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
ncam.x86                           Linux PC (32 bit - i686).
ncam.x86_64                        Linux PC (64 bit).
ncam.x86_64-syn_atom               Linux x86_64 (For Synology ATOM 64 bit).
ncam.ppc                           Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old                       Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4                           Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon           Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian                  ARM (Raspberry pi 3, Prismcube, TInkerboard and other similars).
ncam.arm-android                   ARM (For Android ARM (API 24+)).
ncam.arm-marvell                   ARM (Synology Armada 375 and similar).
ncam.arm-armada37xx                ARM (Synology Armada 37xx).
ncam.arm-mca                       ARM (For Matrix CAM Air).
ncam.arm-samsungtv                 ARM (For Samsung TV).
ncam-router.mips                   Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips  Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips    Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips  Mips (Routers openwrt brcm63xx).
ncam-x86_64-pc.exe                 Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686-pc.exe                   Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).


***********************************************************************************************


Ncam settings web::


Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam


Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.


Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.


Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config


SoftCam.Key Not included!!
The emulator is inactive for default.


If you have any doubts, you can formulate it at https://www.lonasdigital.com/forumdisplay.php?f=1225


***********************************************************************************************


Changelog v5.2-r1:
 - Rework code ref gbox_maxecmsend.
 - Fix sharing instability side effect.
 - [powervu] Fixed emm algo.
 - Fixed warning messages with high GCC 9.x.x
 - Fixed warning integer constant is too large for long type.
 - Add Newcamd NCam and MGcamd (Stealth mode)
 - Fixed gbox module ecm debug string error.
 - Add repeat to ask all gbox readers again during fallback time.
 - Fixed for CAK7 Cards HD03/04/05.


--------------------------------------------------------------------
--------------------------------------------------------------------
 -------------
 Legal warning
 -------------
 NCam does not emulate by default any payment signal without its corresponding suscription. 
 You, as an end user, will be responsible for the use that you will make and neither I am (Javier Sayago), 
 nor www.lonasdigital.com are responsible for what third parties can do with NCam.
--------------------------------------------------------------------
--------------------------------------------------------------------


If you want to invite me for a beer: 
PayPal:           https://www.lonasdigital.com/donaciones




Como siempre digo, si me he olvidado de algo o hay algún problema de última hora, se arreglará en la próxima versión.


Cualquier fallito o lo que sea, me lo comentan y lo atenderé en cuanto pueda.


Un cordial saludo



Descarga por Mega: https://mega.nz/file/DQg3hZzY#F_1sPTrMOF4IFja3JDcWYRd5FC56FDYPT6wPyf8OKA8
 
Gracias por el curro. Vamos a actualizar.
 
NCam 5.2-r1 (oficial) is not working for the Dreambox 920 & 900 openvision 10.2:72:
 
.... pues que ya no uso oscam.... javilonas forever!!! gracias por tus curros..
 
Hello friends, you are using this NCam version: 11.5-r1, but the problem will be putting more than one line according to the cs378x protocol when I press READERS, then I have to restart again !! It only happens, if you read, if you read with the cs378x protocol, if you only read with this protocol, it doesn't happen anymore !! Can you tell me why this is happening?
thanks
 
Última edición:
Hello friends, you are using this NCam version: 11.5-r1, but the problem will be putting more than one line according to the cs378x protocol when I press READERS, then I have to restart again !! It only happens, if you read, if you read with the cs378x protocol, if you only read with this protocol, it doesn't happen anymore !! Can you tell me why this is happening?
thanks

Your version of Ncam is not official, so you should go to whoever modified it.

In this forum you will find the OFFICIAL version of NCAM, latest version: NCam 5.2-r1 (official) by Lonas.

Higher versions are not official, they are fake versions.

To obtain help here, please download and use Official versions.
 
Gran trabajo jefe, como siempre.

Una pregunta, cual sería el binario correcto para un GigaBlue UHD Quad 4K?

He leído que lleva una CPU ARM BCM 7252S, pero no sé cual sería el apropiado.

Gracias anticipadas,

- - - Actualizado - - -

Gran trabajo jefe, como siempre.

Una pregunta, cual sería el binario correcto para un GigaBlue UHD Quad 4K?

He leído que lleva una CPU ARM BCM 7252S, pero no sé cual sería el apropiado.

Gracias anticipadas,
 
Hola. Se puede compilar Ncam para CAK7 1861?
 

Temas similares

Javilonas
Respuestas
650
Visitas
74K
Javilonas
Javilonas
Javilonas
Respuestas
65
Visitas
5K
olecram1315
O
Javilonas
Respuestas
48
Visitas
4K
Javilonas
Javilonas
Javilonas
Respuestas
188
Visitas
25K
Javilonas
Javilonas
Javilonas
Respuestas
141
Visitas
14K
Codec
C
Javilonas
Respuestas
382
Visitas
29K
anatulfo
anatulfo
Atrás
Arriba